Directional Multifrequency Guided Waves Communications Using Discrete Frequency-Steerable Acoustic Transducers.

A novel directional transducer based on guided waves (GWs) is introduced in this article, designed for use in structural health monitoring (SHM) and acoustic data communication applications, i.e., systems in which the elastic medium serves as a transmission channel and information is conveyed through the medium via elastic waves. Such systems can overcome difficulties associated with traditional communication methods like wire-based or radio frequency (RF), which can be complex and have limitations in harsh environments or hard-to-reach places. However, the development of these techniques is hampered by GW dispersive and multimodal propagation and by multipath interference. The shortcomings can be effectively addressed by employing frequency steerable acoustic transducers (FSATs), which leverage their inherent directional capabilities. This can be achieved through the exploitation of a frequency-dependent spatial filtering effect, yielding a direct correlation between the frequency content of the transmitted or received signals and the direction of propagation. The proposed transducer is designed to actuate or sense the A0 Lamb wave propagating in three orientations using varying frequencies and has three channels with distinct frequencies for each direction, ranging from 50 to 450 kHz. The transducer performance was verified through finite element (FE) simulations, accompanied by experimental testing using a scanning laser Doppler vibrometer (SLDV). The unique frequency-steering capability of FSATs is combined with the ON-OFF keying (OOK) modulation scheme to achieve frequency directivity in hardware, similar to ongoing research in 5G communications. The multiple-in-multiple-out (MIMO) capabilities of the transducer were finally tested over a thin aluminum plate, showing excellent agreement with the FE simulation results.

Optimal Array Design and Directive Sensors for Guided Waves DoA Estimation.

The estimation of Direction of Arrival (DoA) of guided ultrasonic waves is an important task in many Structural Health Monitoring (SHM) applications. The aim is to locate sources of elastic waves which can be generated by impacts or defects in the inspected structures. In this paper, the array geometry and the shape of the piezo-sensors are designed to optimize the DoA estimation on a pre-defined angular sector, from acquisitions affected by noise and interference. In the proposed approach, the DoA of a wave generated by a single source is considered as a random variable that is uniformly distributed in a given range. The wave velocity is assumed to be unknown and the DoA estimation is performed by measuring the Differences in Time of Arrival (DToAs) of wavefronts impinging on the sensors. The optimization procedure of sensors positioning is based on the computation of the DoA and wave velocity parameters Cramér-Rao Matrix Bound (CRMB) with a Bayesian approach. An efficient DoA estimator is found based on the DToAs Gauss-Markov estimator for a three sensors array. Moreover, a novel directive sensor for guided waves is introduced to cancel out undesired Acoustic Sources impinging from DoAs out of the given angles range. Numerical results show the capability to filter directional interference of the novel sensor and a considerably improved DoA estimation performance provided by the optimized sensor cluster in the pre-defined angular sector, as compared to conventional approaches.