Fluorescence anisotropy assays for high throughput screening of compounds binding to lipid II, PBP1b, FtsW and MurJ.

Lipid II precursor and its processing by a flippase and peptidoglycan polymerases are considered key hot spot targets for antibiotics. We have developed a fluorescent anisotropy (FA) assay using a unique and versatile probe (fluorescent lipid II) and monitored direct binding between lipid II and interacting proteins (PBP1b, FtsW and MurJ), as well as between lipid II and interacting antibiotics (vancomycin, nisin, ramoplanin and a small molecule). Competition experiments performed using unlabelled lipid II, four lipid II-binding antibiotics and moenomycin demonstrate that the assay can detect compounds interacting with lipid II or the proteins. These results provide a proof-of-concept for the use of this assay in a high-throughput screening of compounds against all these targets. In addition, the assay constitutes a powerful tool in the study of the mode of action of compounds that interfere with these processes. Interestingly, FA assay with lipid II probe has the advantage over moenomycin based probe to potentially identify compounds that interfere with both donor and acceptor sites of the aPBPs GTase as well as compounds that bind to lipid II. In addition, this assay would allow the screening of compounds against SEDS proteins and MurJ which do not interact with moenomycin.

Correction: Bacillus subtilis MraY in detergent-free system of nanodiscs wrapped by styrene-maleic acid copolymers.

[This corrects the article DOI: 10.1371/journal.pone.0206692.].

Bacillus subtilis MraY in detergent-free system of nanodiscs wrapped by styrene-maleic acid copolymers.

As an integral membrane protein, purification and characterization of phospho-N- acetylmuramyl- pentapeptide translocase MraY have proven difficult. Low yield and concerns of retaining stability and activity after detergent solubilization have hampered the structure-function analysis. The recently developed detergent-free styrene-maleic acid (SMA) co-polymer system offers an alternative approach that may overcome these disadvantages. In this study, we used the detergent free system to purify MraY from Bacillus subtilis. This allowed efficient extraction of MraY that was heterologously produced in Escherichia coli membranes into SMA-wrapped nanodiscs. The purified MraY embedded in these nanodiscs (SMA-MraY) was comparable to the micellar MraY extracted with a conventional detergent (DDM) with regard to the yield and the purity of the recombinant protein but required significantly less time. The predominantly alpha-helical secondary structure of the protein in SMA-wrapped nanodiscs was also more stable against heat denaturation compared to the micellar protein. Thus, this detergent-free system is amenable to extract MraY efficiently and effectively while maintaining the biophysical properties of the protein. However, the apparent activity of the SMA-MraY was reduced compared to that of the detergent-solubilized protein. The present data indicates that this is caused by a lower accessibility of the enzyme in SMA-wrapped nanodiscs towards its polyisoprenoid substrate.

Mapping the Contact Sites of the Escherichia coli Division-Initiating Proteins FtsZ and ZapA by BAMG Cross-Linking and Site-Directed Mutagenesis.

Cell division in bacteria is initiated by the polymerization of FtsZ at midcell in a ring-like structure called the Z-ring. ZapA and other proteins assist Z-ring formation and ZapA binds ZapB, which senses the presence of the nucleoids. The FtsZ⁻ZapA binding interface was analyzed by chemical cross-linking mass spectrometry (CXMS) under in vitro FtsZ-polymerizing conditions in the presence of GTP. Amino acids residue K42 from ZapA was cross-linked to amino acid residues K51 and K66 from FtsZ, close to the interphase between FtsZ molecules in protofilaments. Five different cross-links confirmed the tetrameric structure of ZapA. A number of FtsZ cross-links suggests that its C-terminal domain of 55 residues, thought to be largely disordered, has a limited freedom to move in space. Site-directed mutagenesis of ZapA reveals an interaction site in the globular head of the protein close to K42. Using the information on the cross-links and the mutants that lost the ability to interact with FtsZ, a model of the FtsZ protofilament⁻ZapA tetramer complex was obtained by information-driven docking with the HADDOCK2.2 webserver.

The chlamydial anomaly clarified?

Getting visible: A new method to label bacterial cell walls shows the presence of functional peptidoglycan in the important pathogen Chlamydia trachomatis. This might clarify the long-standing paradox of the "chlamydial anomaly".

Specificity of the transport of lipid II by FtsW in Escherichia coli.

Synthesis of biogenic membranes requires transbilayer movement of lipid-linked sugar molecules. This biological process, which is fundamental in prokaryotic cells, remains as yet not clearly understood. In order to obtain insights into the molecular basis of its mode of action, we analyzed the structure-function relationship between Lipid II, the important building block of the bacterial cell wall, and its inner membrane-localized transporter FtsW. Here, we show that the predicted transmembrane helix 4 of Escherichia coli FtsW (this protein consists of 10 predicted transmembrane segments) is required for the transport activity of the protein. We have identified two charged residues (Arg(145) and Lys(153)) within this segment that are specifically involved in the flipping of Lipid II. Mutating these two amino acids to uncharged ones affected the transport activity of FtsW. This was consistent with loss of in vivo activity of the mutants, as manifested by their inability to complement a temperature-sensitive strain of FtsW. The transport activity of FtsW could be inhibited with a Lipid II variant having an additional size of 420 Da. Reducing the size of this analog by about 274 Da resulted in the resumption of the transport activity of FtsW. This suggests that the integral membrane protein FtsW forms a size-restricted porelike structure, which accommodates Lipid II during transport across the bacterial cytoplasmic membrane.

Identification of FtsW as a transporter of lipid-linked cell wall precursors across the membrane.

Bacterial cell growth necessitates synthesis of peptidoglycan. Assembly of this major constituent of the bacterial cell wall is a multistep process starting in the cytoplasm and ending in the exterior cell surface. The intracellular part of the pathway results in the production of the membrane-anchored cell wall precursor, Lipid II. After synthesis this lipid intermediate is translocated across the cell membrane. The translocation (flipping) step of Lipid II was demonstrated to require a specific protein (flippase). Here, we show that the integral membrane protein FtsW, an essential protein of the bacterial division machinery, is a transporter of the lipid-linked peptidoglycan precursors across the cytoplasmic membrane. Using Escherichia coli membrane vesicles we found that transport of Lipid II requires the presence of FtsW, and purified FtsW induced the transbilayer movement of Lipid II in model membranes. This study provides the first biochemical evidence for the involvement of an essential protein in the transport of lipid-linked cell wall precursors across biogenic membranes.

The GTPase activity of Escherichia coli FtsZ determines the magnitude of the FtsZ polymer bundling by ZapA in vitro.

FtsZ polymerizes in a ring-like structure at mid cell to initiate cell division in Escherichia coli. The ring is stabilized by a number of proteins among which the widely conserved ZapA protein. Using antibodies against ZapA, we found surprisingly that the cellular concentration of ZapA is approximately equal to that of FtsZ. This raised the question of how the cell can prevent their interaction and thereby the premature stabilization of FtsZ protofilaments in nondividing cells. Therefore, we studied the FtsZ-ZapA interaction at the physiological pH of 7.5 instead of pH 6.5 (the optimal pH for FtsZ polymerization), under conditions that stimulate protofilament formation (5 mM MgCl(2)) and under conditions that stimulate and stabilize protofilaments (10 mM MgCl(2)). Using pelleting, light scattering, and GTPase assays, it was found that stabilization and bundling of FtsZ polymers by ZapA was inversely correlated to the GTPase activity of FtsZ. As GTP hydrolysis is the rate-limiting factor for depolymerization of FtsZ, we propose that ZapA will only enhance the cooperativity of polymer association during the transition from helical filament to mid cell ring and will not stabilize the short single protofilaments in the cytoplasm. All thus far published in vitro data on the interaction between FtsZ and ZapA have been obtained with His-ZapA. We found that in our case the presence of a His tag fused to ZapA prevented the protein to complement a DeltazapA strain in vivo and that it affected the interaction between FtsZ and ZapA in vitro.

Rapid screening by real-time 16S rDNA PCR for bacterial contamination of blood products.

Although blood component transfusion is currently regarded as safe, adverse events may occur in recipients of these products. Among those, blood borne viral, bacterial and parasitic infections are best known. For detection of bacterial contamination in platelet concentrates various methods are available or under investigation. One of these methods, real-time polymerase chain reaction (PCR) with particular focus on real-time 16S rDNA detection, will be discussed in this review.

The essential peptidoglycan glycosyltransferase MurG forms a complex with proteins involved in lateral envelope growth as well as with proteins involved in cell division in Escherichia coli.

In Escherichia coli many enzymes including MurG are directly involved in the synthesis and assembly of peptidoglycan. MurG is an essential glycosyltransferase catalysing the last intracellular step of peptidoglycan synthesis. To elucidate its role during elongation and division events, localization of MurG using immunofluorescence microscopy was performed. MurG exhibited a random distribution in the cell envelope with a relatively higher intensity at the division site. This mid-cell localization was dependent on the presence of a mature divisome. Its localization in the lateral cell wall appeared to require the presence of MreCD. This could be indicative of a potential interaction between MurG and other proteins. Investigating this by immunoprecipitation revealed the association of MurG with MreB and MraY in the same protein complex. In view of this, the loss of rod shape of DeltamreBCD strain could be ascribed to the loss of MurG membrane localization. Consequently, this could prevent the localized supply of the lipid II precursor to the peptidoglycan synthesizing machinery involved in cell elongation. It is postulated that the involvement of MurG in the peptidoglycan synthesis concurs with two complexes, one implicated in cell elongation and the other in division. A model representing the first complex is proposed.

Applications of real-time PCR in the screening of platelet concentrates for bacterial contamination.

Although there have been major improvements over the past few decades in detection methods for blood-borne infectious agents, platelet concentrates are still responsible for most cases of transfusion-transmitted bacterial infections. To date, real-time PCR is an indispensable tool in diagnostic laboratories to detect pathogens in a variety of biological samples. In this article, the applications of this powerful technique in the screening of platelet concentrates for bacterial contamination are discussed. Next to pathogen-specific (real-time) PCR assays, particular attention is directed to the recently developed 16S rDNA real-time PCR. This assay has been proven as a convenient way to detect bacterial contamination of platelet concentrates. The assay is sensitive and enables rapid detection of low initial numbers of bacteria in platelet concentrates. The short turnaround time of this assay allows high-throughput screening and reduction of the risk of transfusion of bacterially contaminated units. As with every method, real-time PCR has its advantages and disadvantages. These and especially limitations inherent to generation of false-positive or -negative results are emphasized. The universal nature of detection of the assay may be suitable for generalized bacterial screening of other blood components, such as red blood cells and plasma. Therefore, it is necessary to adapt and optimize detection in red blood cells and plasma with real-time PCR. Further sophistication, miniaturization and standardization of extraction and amplification methods should improve the total performance and robustness of the assay. Hence, real-time PCR is an attractive method in development as a more rapid screening test than currently used culture methods to detect bacterial contamination in blood components.

Detection of bacteria in platelet concentrates: comparison of broad-range real-time 16S rDNA polymerase chain reaction and automated culturing.

BACKGROUND: Based on real-time polymerase chain reaction (PCR) technology, a broad-range 16S rDNA assay was validated and its performance was compared to that of an automated culture system to determine its usefulness for rapid routine screening of platelet concentrates (PCs). STUDY DESIGN AND METHODS: The presence of bacteria in pooled PCs was routinely assessed in an automated culturing system (BacT/ALERT, bioMerieux). The PCR assay was performed with DNA extracted from the same samples as used for culturing. DNA extraction was performed with a automated extraction system (MagNA Pure, Roche Diagnostics). PCR amplification was performed with a set of universal primers and probe targeting eubacterial 16S rDNA. RESULTS: A total of 2146 PCs were tested. Eighteen (0.83%) samples were found to be contaminated. These samples were positive for the presence of bacteria by both methods. All contaminants were identified as bacteria belonging to the common human skin flora. These included Propionibacterium spp. (n = 7), Staphylococcus spp. (n = 6), Bacillus spp. (n = 2), Micrococcus spp. (n = 2), and Peptostreptococcus spp. (n = 1). Estimation of the bacterial load in PCs by real-time PCR showed that the initial levels of contamination varied between 13.6 and 9 x 10(4) colony-forming unit equivalents per PCR procedure. CONCLUSIONS: Compared to culture in the BacT/ALERT system, the PCR assay had a sensitivity of 100 percent and a specificity of 100 percent. This real-time PCR assay has a much shorter turnaround time of 4 hours, which offers the possibility to test and obtain results on PCs before release or the day they are transfused. This would permit the withdrawal of contaminated PCs before transfusion.

Removal of contaminating DNA from commercial nucleic acid extraction kit reagents.

Due to contamination of DNA extraction reagents, false-positive results can occur when applying broad-range real-time PCR based on bacterial 16S rDNA. Filtration of the nucleic acid extraction kit reagents with GenElute Maxiprep binding columns was effective in removing this reagent-derived contaminating DNA while the sensitivity of the assay was maintained.

Detection of bacterial DNA in blood samples from febrile patients: underestimated infection or emerging contamination?

We applied real-time broad-range polymerase chain reaction (PCR) to detect bacteraemia in blood from febrile patients. Interpretation of amplification results in relation to clinical data and blood culture outcome was complex, although the reproducibility of the PCR results was good. Sequencing analysis of the PCR products revealed the presence of Burkholderia species DNA while no Burkholderia species grew in culture. The source of this contamination was shown to be the commercial DNA isolation kit used in the automated MagNA Pure Isolation Robot. A high degree of suspicion is required when uncommon or unexpected pathogens are diagnosed by molecular methods as clinical consequences can be serious.

Real-time amplification of HLA-DQA1 for counting residual white blood cells in filtered platelet concentrates.

UNLABELLED: BACKGROUND A real-time polymerase chain reaction (PCR) assay based on amplification of a conserved region of the HLA-DQA1 locus was developed and validated to assess its suitability in quantitating low levels of white blood cells (WBCs) in filtered platelet (PLT) concentrates (PCs). STUDY DESIGN AND METHODS: To determine the detection limit, serial dilutions of nonfiltered PCs with known quantities of WBCs were prepared. The analytical sensitivity and accuracy of the assay was tested with WBC concentrations ranging from 300 to 0.03 per microL with real-time PCR and flow cytometry. In addition, 126 random PCs were investigated to assess the capacity of the PCR method to quantify residual WBCs in clinical specimens. RESULTS: A sensitivity of 0.2 WBC equivalent per micro L (1.5 x 10(4) WBC equivalents/unit) was achieved. The assay was shown to be accurate and the HLA-DQA1 gene was reproducibly and consistently amplified in all tested samples (coefficient of variance of < 5%). Overall, the results of the PCR assay correlated well with those of the flow cytometry. The PCR assay detected a concentration of 3 WBCs per micro L (approximately 1 x 10(6) WBCs/unit) with 100 percent accuracy. CONCLUSION: Real-time PCR is rapid, sensitive, accurate, and reproducible. Hence this approach may prove suitable in routine monitoring of residual WBCs in PCs.

Optimization of real-time PCR assay for rapid and sensitive detection of eubacterial 16S ribosomal DNA in platelet concentrates.

A real-time PCR assay was developed for rapid detection of eubacterial 16S ribosomal DNA in platelet concentrates. The sensitivity of this assay can be hampered by contaminating DNA in the PCR reagents. Digestion of the PCR reagents with Sau3AI prior to PCR amplification was effective in eliminating this contaminating DNA without affecting the sensitivity of the assay.