RESUMO
Considering the rapidly increasing population, the development of new resources, skills, and devices that can provide safe potable water and clean energy remains one of the vital research topics for the scientific community. Owing to this, scientific community discovered such material for tackle this issue of environment benign, the new materials with graphene functionalized derivatives show significant advantages for application in multifunctional catalysis and energy storage systems. Herein, we highlight the recent methods reported for the preparation of graphene-based materials by focusing on the following aspects: (i) transformation of graphite/graphite oxide into graphene/graphene oxide via exfoliation and reduction; (ii) bioinspired fabrication or modification of graphene with various metal oxides and its applications in photocatalysis and storage systems. The kinetics of photocatalysis and the effects of different parameters (such as photocatalyst dose and charge-carrier scavengers) for the optimization of the degradation efficiency of organic dyes, phenol compounds, antibiotics, and pharmaceutical drugs are discussed. Further, we present a brief introduction on different graphene-based metal oxides and a systematic survey of the recently published research literature on electrode materials for lithium-ion batteries (LIBs), supercapacitors, and fuel cells. Subsequently, the power density, stability, pseudocapacitance charge/discharge process, capacity and electrochemical reaction mechanisms of intercalation, and conversion- and alloying-type anode materials are summarized in detail. Furthermore, we thoroughly distinguish the intrinsic differences among underpotential deposition, intercalation, and conventional pseudocapacitance of electrode materials. This review offers a meaningful reference for the construction and fabrication of graphene-based metal oxides as effective photocatalysts for photodegradation study and high-performance optimization of anode materials for LIBs, supercapacitors, and fuel cells.
RESUMO
Production and utilization of grey and blue hydrogen is responsible for emission of millions of tons of carbon dioxide (CO2) across the globe. This increased emission of CO2 has severe repercussions on the planet earth and in particular on climate change. Here in, we explored advance bimetallic (BM) CuO/Ag and trimetallic (TM) CuO/Ag/NiO based nanoporous materials supported with silica nanoparticles (SiNPs) via sol-gel route. The explored nanocatalysts were characterized by Powder X-ray diffraction (P-XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), and Raman spectroscopic techniques. These advance nanocatalysts were evaluated for the green hydrogen production through electrocatalysis and photocatalysis. The catalysts exhibited an exceptional catalytic performance, the onset potential for hydrogen evolution reaction (HER) was determined to be - 0.9 V BMSiNPs-GCE and - 0.7 V (vs Ag/AgCl) for TMSiNPs-GCE, whereas η@10 for BMSiNPs-GCE and TMSiNPs-GCE is - 1.26 and - 1.00 V respectively. Significantly, the TMSiNPs composite and the BMSiNPs composite exhibited superior photochemical H2 evolution rates of 1970.72 mmol h-1 g-1 and 1513.97 mmol h-1 g-1, respectively. The TMSiNPs catalyst presents a highly promising material for HER. This study reveals a cost-effective approach to develop sustainable and resourceful electrocatalysts for HER.
RESUMO
Elemental 2D pnictogens (group 15) are an interesting class of materials with tunable band structures and high carrier mobilities. Heavier pnictogens (Sb and Bi) are stable under ambient conditions compared to lighter members (P and As) and are emerging as interesting candidates for various electronic and optoelectronic applications. The reactivity of these materials is due to the presence of a lone pair which can be effectively utilized to tune material properties via different functionalization strategies. In this work, we have synthesized antimonene and bismuthene nanosheets by liquid exfoliation which are emissive in the visible range and functionalized these nanosheets with group 12 and 13 Lewis acids (ZnCl2, CdCl2, BCl3, GaCl3, AlCl3, and InCl3). Interaction of these Lewis acids with the lone pairs on Sb/Bi leads to the formation of Lewis acid-base adducts with the corresponding changes in the bonding environment along with lattice distortion and rehybridization of the band structure. Interestingly, the changes in band structure upon functionalization were realized as a blue shift in the emission of few-layered Sb and Bi. This is the first report on the functionalization of heavier pnictogens by the formation of Lewis acid-base adducts and opens a path for tuning their properties for integration in electronic and optoelectronic devices.
RESUMO
Antimonene and bismuthene are promising members of the 2D pnictogen family with their tunable band gaps, high electronic conductivity, and ambient stability, making them suitable for electronic and optoelectronic applications. However, semi-metal to semiconductor transition occurs only in the mono/bilayer regime, limiting their applications. Covalent functionalization is a versatile method for tuning materials' chemical, electronic, and optical properties and can be explored for tuning the properties of pnictogens. In this work, emissions in liquid exfoliated antimonene and bismuthene are observed at ≈2.23 and ≈2.33 eV, respectively. Covalent functionalization of antimonene and bismuthene with p-nitrobenzene diazonium salt proceeds with the transfer of lone pairs from Sb/Bi to the diazonium salt, introducing organic moieties on the surface attached predominantly via Sb/BiC bonds. Consequently, Sb/Bi signatures in Raman and X-ray photoelectron spectra are blue-shifted, implying lattice distortion and charge transfer. Interestingly, emission can be tailored upon functionalization to 2.18 and 2.27 eV for antimonene and bismuthene respectively, and this opens the possibility of tuning the properties of pnictogens and related materials. This is the first report on covalent functionalization of antimonene and bismuthene. It sheds light on the reaction mechanism on pnictogen surfaces and demonstrates tunability of optical property and surface passivation.
Assuntos
Metaloides , Semicondutores , Eletrônica , NitrobenzenosRESUMO
Electrochemical reduction of carbon dioxide is a viable alternative for reducing fossil fuel consumption and reducing atmospheric CO2 levels. Although, a wide variety of materials have been studied for electrochemical reduction of CO2, the selective and efficient reduction of CO2 is still not accomplished. Complex reaction mechanisms and the competing hydrogen evolution reaction further complicates the efficiency of materials. An extensive understanding of reaction mechanism is hence essential in designing an ideal electrocatalyst material. Therefore, in this review article we discuss the materials explored in the last decade with focus on their catalytic mechanism and methods to enhance their catalytic activity.
Assuntos
Dióxido de Carbono , Combustíveis Fósseis , Catálise , EletrodosRESUMO
Covalently cross-linked heterostructures of 2D materials are a new class of materials which possess electrochemical and photochemical hydrogen evolution properties. It was of considerable interest to investigate the role of interlayer spacing in the nanocomposites involving MoS2 and graphene sheets and its control over electronic structures and catalytic properties. We have investigated this problem with emphasis on the hydrogen evolution properties of these structures by a combined experimental and theoretical study. We have linked MoS2 based nanocomposites with other 2D materials with varying interlayer spacing by changing the linker and studied their hydrogen evolution properties. The hydrogen evolution activity for these composites decreases with increasing linker length, which we can link to a decrease in magnitude of charge transfer across the layers with increasing interlayer spacing. Factors such as the nature of the sheets, interlayer distance as well as the nature of the linker provide pathways to tune the properties of covalently cross-linked 2D material rendering this new class of materials highly interesting.
RESUMO
Murakkab drugs of Unani medicine have remained an important aspect of disease treatment since antiquity. Physicians prepared different formulations for various diseases. The formulations thus prepared have always been of two categories. One category of Murakkab drugs was those which were formulated empirically and remained in use without conceptual framework behind these formulations. These formulations were categorized as Mujarrab (tested) formulations. The other category of formulations was prepared in consideration with theoretical framework of Mizaj (temperament) and Usoole ilaj (treatment strategy) and then tested by physicians. This category forms a large chunk of formulations in the formulary sections of the literature of Unani medicine. Present paper explores various approaches for formulating Murakkab drugs of the second category keeping in view the actions of the ingredients of the drug formulation, and treatment strategy of the disease for which the formulation was prepared. It elucidates the approaches of formulating compound drug formulations with the logic of including various individual ingredients. The study exemplifies two compound formulations to illustrate the approaches used to formulate compound formulations of Unani medicine.
RESUMO
Aliovalent anion substitution in inorganic materials brings about marked changes in properties, as exemplified by N,F-codoped metal oxides. Recently, complete substitution of oxygen in ZnO by N and F was carried out to generate Zn2 NF. In view of the important properties of TiO2 , we have attempted to prepare TiNF by employing an entirely new procedure involving the reaction of TiN with TiF4 . While the reaction at low temperature (450 °C) yields TiNF in the anatase phase, reaction at a higher temperature (600 °C) yields TiNF in the rutile phase. This is interesting since the anatase phase of TiO2 also transforms to the rutile phase on heating. The lattice parameters of TiNF are close to those of the parent oxide. Partial substitution of oxygen in TiO2 by N and F reduces the band gap, but complete substitution increases the value comparable to that of the oxide. We have examined properties of N,F-codoped TiO2 , and more interestingly N,F-codoped Ti3 O5 , both with lower band gaps than the parent oxides. A detailed first-principles calculations has been carried out on structural and electronic properties of N,F-TiO2 and the TiNF phases. This has enabled us to understand the effects of N,F substitution in TiO2 in terms of the crystal structure, electronic structure and optical properties.
RESUMO
Producing hydrogen from water in an efficient manner could significantly reduce consumption of fossil fuels. In this regard the abundant presence of water in oceans offers an important alternative approach for water splitting using seawater. Direct use of seawater for the generation of hydrogen is a difficult and complex process due to the presence of various ions in seawater, which affect the activity of the catalysts and makes the selectivity towards efficient water splitting a challenging task. Herein various ways are reported to efficiently reduce seawater to hydrogen under visible light irradiation by various catalysts already reported by this group. A better performance than pure water was observed in some cases, and in a few cases the opposite was observed, implying that with a proper approach seawater can be efficiently reduced to generate hydrogen.
RESUMO
Elimination or reduction of CO2 in the atmosphere is a serious problem faced by humankind, and it has become imperative for chemists to find ways of transforming undesirable CO2 to useful chemicals. One of the best means is the use of solar energy for the photochemical reduction of CO2. In spite of considerable efforts, discovery of stable photocatalysts which work in the absence of scavengers has remained a challenge although encouraging results have been obtained in the photocatalytic reduction of CO2 in both gas and liquid phases. Semiconductor-based catalysts, multicomponent semiconductors, metal-organic frameworks (MOFs), and dyes as well as composites involving novel composite materials containing C3N4 and MoS2 have been employed for the photoreduction process. Semiconductor heterostructures, especially those containing bimetallic alloys as well as chemical modification of oxides and other materials with aliovalent anion substitution (N3- and F- in place of O2-), remain worthwhile efforts. In this article, we provide a brief perspective of the present status of photocatalytic reduction of CO2 in both liquid and gas phases.