Spin Filtering and Amplification in Self-Assembled Nanofibers Based on Chiral Asymmetric Building Blocks.

The cooperativity in artificial self-assembling systems can be enhanced to expand their applications and redesign their properties. Recently, chiral molecules have garnered renewed attention due to their potential as highly efficient spin filters through the chiral-induced spin selectivity (CISS) effect. However, the potential of asymmetric building blocks based on chiral perylene diimides (PDIs) self-assembled materials to generate a spin-polarized current is still not widely acknowledged. In this work, we have demonstrated that nanofibers derived from "asymmetric PDIs" molecules have been found to exhibit promising spin-filtering property and the amplification of spin polarization at room temperature. Also, the exploration of chiral amplification and correlating it with the amplification of spin polarization have been reported for the first time through this work. These findings underscore the significance of self-assembled materials in the realm of spintronics, as they offer fascinating platforms with evolving structure-property relationship. It also provides the feasible possibility of enhancing the CISS-based spintronic devices that can accomplish controllability and high spin-filtering efficiency simultaneously.

Double Helix of Icosahedra Structure and Spin Glass Magnetism of the δ-Co2.5Zn17.5-xMnx (x = 0.4-3.5) Pseudo-Binary Alloys.

We have synthesized δ-Co2.5Zn17.5-xMnx (x = 0.4-3.5) pseudo-binary alloys of 10 different compositions by a high-temperature solid-state synthetic route, determined their crystal structures and the Mn substitution pattern, and estimated the existence range of the δ-phase. The alloys crystallize in two chiral enantiomorphic space groups P62 and P64, where the basic atomic polyhedron of the chiral structure is an icosahedron and the neighboring icosahedra share vertices to form an infinitely long double helix along the hexagonal axis (like in the δ-Co2.5Zn17.5 parent binary phase). The alloys are pure δ-phase up to the Mn content x ≈ 3.5. The Mn atoms partially substitute Zn atoms at particular crystallographic sites located on the icosahedra. The study of magnetism was performed on the Co2.5Zn17.1Mn0.4 alloy with the lowest Mn content. Contrary to the expectation that structural chirality may induce the formation of a nontrivial magnetic state, a spin glass state with no relation to the structural chirality was found. The magnetic sublattice contains all of the necessary ingredients (randomness and frustration) for the formation of a spin glass state. Typical out-of-equilibrium dynamic phenomena of a spin system with broken ergodicity were detected below the spin freezing temperature Tf ≈ 8 K.

Ahead by a Century: Discovery of Laves Phases Assisted by Machine Learning.

Laves phases AB2 form the most abundant group of intermetallic compounds, consisting of combinations of larger electropositive metals A with smaller metals B. Many practical applications of Laves phases depend on the ability to tune their physical properties through appropriate substitution of either the A or B component. Although simple geometrical and electronic factors have long been thought to control the formation of Laves phases, no single factor alone can make predictions accurately. Several machine learning models have been developed to discover new Laves phases, including variations caused by solid solubility, using elemental properties solely on the basis of chemical composition. These models were trained on a data set comprising about 3700 entries of experimentally known phases AB2 with Laves and non-Laves structures. Among these models, a decision tree algorithm gave very good performance (average recall of 95%, precision of 94%, and accuracy of 96% on the test set) by using only a small set of descriptors, the most important of which relates to the electron density at the boundary of the Wigner-Seitz cell for the B component. This model provides guidance for new experiments by making predictions on >400000 candidates very quickly. A chemically unintuitive candidate Cd(Cu1-xSbx)2 with a limited solid solubility of Sb for Cu was targeted; it was successfully synthesized and confirmed to adopt a cubic MgCu2-type Laves structure.

Spectacle compliance postcataract surgery significantly improved vision function-related quality of life of adult patients in India: Evidence from a multicenter longitudinal cohort study.

BACKGROUND: Cataract is the leading cause of avoidable blindness globally. This study aims to measure the changes in Vision function-related quality of life (VFQoL) before and after cataract surgery and identify the predictors of an improvement in these outcomes. METHODS: A multicenter, longitudinal cohort study was conducted. Patients with first eye cataracts were interviewed before and 6 months after cataract surgery. Multiple classification analysis (MCA) was performed to assess variation in the intensities of mean change scores for general function, psychosocial impact, and visual function with select factors. RESULTS: A total of 747 participated in the baseline assessment. The 6-month follow-up rate was 86.5%. The mean general function, psychosocial impact, and visual function scores were 35.3 (±8.6), 12.5 (±3.4), and 8.3 (±3) in the baseline and 17 (±5.3), 6 (±2.2) and 3.8 (±1.3) in the follow-up assessments, respectively. In MCA, patients using spectacles postsurgery (ß 0.111) and those having a very good postoperative visual acuity (ß 0.098) had the most impact on general function. Patients reporting no ocular complaints postsurgery had a relatively higher effect on the psychosocial impact, (ß 0.168) and similarly, patients using spectacles postsurgery and those aged 70 and older had the most impact on the visual function scores (ß 0.146 and 0.126), respectively. CONCLUSION: Cataract surgery is associated with meaningful improvements in vision and VFQoL in general. The determinants of better VFQoL include the usage of spectacles postsurgery. Strategies to further improve patient participation in postoperative review visits are needed for spectacle provision and patient education regarding spectacle use and compliance is imparted during such visits.

Direct aromatic nitration by bacterial P450 enzymes.

Nitro aromatics have broad applications in industry, agriculture, and pharmaceutics. However, their industrial production is faced with many challenges including poor selectivity, heavy pollution and safety concerns. Nature provides multiple strategies for aromatic nitration, which opens the door for the development of green and efficient biocatalysts. Our group's efforts focused on a unique bacterial cytochrome P450 TxtE that originates from the biosynthetic pathway of phytotoxin thaxtomins, which can install a nitro group at C4 of l-Trp indole ring. TxtE is a Class I P450 and its reaction relies on a pair of redox partners ferredoxin and ferredoxin reductase for essential electron transfer. To develop TxtE as an efficient nitration biocatalyst, we created artificial self-sufficient P450 chimeras by fusing TxtE with the reductase domain of the bacterial P450BM3 (BM3R). We evaluated the catalytic performance of the chimeras with different lengths of the linker connecting TxtE and BM3R domains and identified one with a 14-amino-acid linker (TB14) to give the best activity. In addition, we demonstrated the broad substrate scope of the engineered biocatalyst by screening diverse l-Trp analogs. In this chapter, we provide a detailed procedure for the development of aromatic nitration biocatalysts, including the construction of P450 fusion chimeras, biochemical characterization, determination of catalytic parameters, and testing of enzyme-substrate scope. These protocols can be followed to engineer other P450 enzymes and illustrate the processes of biocatalytic development for the synthesis of nitro chemicals.

Role of Partial Vacancy and Structural Distortion in the Stability of Nonstoichiometric Phases Ni7-δInSe2-xSx (1.26 ≥ δ ≥ 0.94; 0 ≤ x ≤ 1.33).

This study explores the structure and stability of partly disordered sulfur-substituted Ni5.74InSe2 (I4/mmm, a = 3.6766(1) Å, c = 18.8178(10) Å, Z = 2). The structure of Ni7-δInSe2-xSx (x = 0.2, 0.36, 0.66, 0.80, 0.94) compounds is isotypic to their parent Ni5.74InSe2 and can be viewed as alternating heterometallic Cu3Au-type ∞2[Ni3In] slabs and defective Cu2Sb-type ∞2[Ni4-δ(Se/S)2] slabs along the [001]-axis. Similar to the parent Se-compound, the Ni-Ch (Ch = chalcogen) fragment is non-stoichiometric and possesses a partially occupied Ni-site. It was observed that with sulfur insertion at the selenium site of Ni5.74InSe2, the interatomic distance between the partially occupied nickel and mixed (S/Se) sites decreases from ∼2.24 to ∼1.95 Å, and the occupancy of the disordered nickel site simultaneously increases. The limiting composition Ni6.06InSe0.67S1.33 (x = 1.33, δ = 0.94) is formed in the sulfur-rich region. Its average structure resembles the Ni6SnS2-type and has a similar motif to Ni5.74InSe2; the only difference is that Cu3Au-type ∞2[Ni3In] alternates with two types of Ni-Ch fragments (Cu2Sb or Li2O type units). By using first-principles electronic structure calculations, we explained the presence of partially disordered nickel sites in the Ni-Ch fragment and rationalized why the nickel site occupancy increases with sulfur insertion.

Spin-induced electron transmission through metal-organic chiral crystals.

Metal-organic Co(II)-phenylalanine crystals were studied and were found to possess magnetic properties and long-range spin transport. Magnetic measurements confirmed that in the crystals there are antiferromagnetic interactions between Co(II) and the lattice. The metal-organic crystals (MOCs) also present the chirality-induced spin selectivity (CISS) effect at room temperature. A long-range spin polarization is observed using a magnetic conductive-probe atomic force microscope. The spin polarization is found to be in the range of 35-45%.

Degradation Analysis of Organic Light-Emitting Diodes through Dispersive Magneto-Electroluminescence Response.

Understanding the stability and degradation of organic light-emitting diodes (OLEDs) under working conditions is a significant area of research for developing more effective OLEDs and further improving their performance. However, studies of degradation processes by in situ noninvasive methods have not been adequately developed. In this work, tris-(8-hydroxyquinolino) aluminum (Alq3)-based OLED degradation processes have been analyzed through the investigation of the device dispersive magneto-electroluminescence (MEL(B)) response measured at room temperature. By studying the change in the MEL(B) response during the device degradation under different external stimuli, such as exposing the device to the atmosphere and prolonged illumination by a strong visible light source, we have gained insight into the microscopic spin-dependent phenomena that control the recombination of e-h polaron pairs in the device. We found that the device degradation leads to a shorter e-h polaron lifetime, smaller dispersive parameter, and broader lifetime distribution function that shows increased disorder in the active layer. This study could offer a potential tool that may be beneficial for assessing the degradation of OLED devices based on various active layers.

A randomised, double-blind, comparative study of preoperative magnesium sulphate versus zinc sulphate gargle for prevention of postoperative sore throat following endotracheal intubation.

Background and Aims: Magnesium sulphate and zinc sulphate have been reported to attenuate postoperative sore throat (POST). The study aims to compare the effect of preoperative magnesium sulphate and zinc sulphate gargle on the incidence and severity of POST following endotracheal intubation within 24 h. Methods: After ethics committee approval, 132 patients were randomly allocated to three groups (M, Z and D). Fifteen minutes before laryngoscopy and tracheal intubation, patients assigned to groups M and Z received a solution for gargle containing magnesium sulphate 20 mg/kg and zinc sulphate containing 40 mg of elemental zinc dissolved in 20 ml of 5% dextrose solution, respectively. Group D received 20 ml of 5% dextrose solution. Incidence and severity of POST (4-point score: Grade 0- no sore throat, Grade 1- mild sore throat, Grade 2- moderate sore throat, Grade 3- severe sore throat) was assessed for 24 h after extubation. Statistica, Version 8.0 (StatSoft, Inc., Tulsa, Oklahoma, USA) was used for analysing the data. Results: The lowest incidence of POST in group M was 13.6% (95% confidence interval [CI] 3.5-23.7) compared to 0% in group Z, whereas the highest incidence recorded in group M was 25% (95% CI 12.2-37.7) in contrast to 13.6% (95% CI 3.5-23.7) in group Z during the first 24 h after operation. It was observed that the incidence of mild POST (POST score 1) was significantly lower (P < 0.05) in group Z compared to group M in the first 4 h postoperatively. Conclusion: Zinc sulphate gargle before laryngoscopy and tracheal intubation is more effective for reducing the incidence of POST than magnesium sulphate gargle.

Spin-induced asymmetry reaction-The formation of asymmetric carbon by electropolymerization.

We describe the spin polarization-induced chirogenic electropolymerization of achiral 2-vinylpyridine, which forms a layer of enantioenhanced isotactic polymer on the electrode. The product formed is enantioenriched in asymmetric carbon polymer. To confirm the chirality of the polymer film formed on the electrode, we also measured its electron spin polarization properties as a function of its thickness. Two methods were used: First, spin polarization was measured by applying magnetic contact atomic force microscopy, and second, magnetoresistance was assessed in a sandwich-like four-point contact structure. We observed high spin-selective electron transmission, even for a layer thickness of 120 nm. A correlation exists between the change in the circular dichroism signal and the change in the spin polarization, as a function of thickness. The spin-filtering efficiency increases with temperature.

Interrelation between Stress Management and Secretion Systems of Ralstonia solanacearum: An In Silico Assessment.

Ralstonia solanacearum (Rs), the causative agent of devastating wilt disease in several major and minor economic crops, is considered one of the most destructive bacterial plant pathogens. However, the mechanism(s) by which Rs counteracts host-associated environmental stress is still not clearly elucidated. To investigate possible stress management mechanisms, orthologs of stress-responsive genes in the Rs genome were searched using a reference set of known genes. The genome BLAST approach was used to find the distributions of these orthologs within different Rs strains. BLAST results were first confirmed from the KEGG Genome database and then reconfirmed at the protein level from the UniProt database. The distribution pattern of these stress-responsive factors was explored through multivariate analysis and STRING analysis. STRING analysis of stress-responsive genes in connection with different secretion systems of Rs was also performed. Initially, a total of 28 stress-responsive genes of Rs were confirmed in this study. STRING analysis revealed an additional 7 stress-responsive factors of Rs, leading to the discovery of a total of 35 stress-responsive genes. The segregation pattern of these 35 genes across 110 Rs genomes was found to be almost homogeneous. Increasing interactions of Rs stress factors were observed in six distinct clusters, suggesting six different types of stress responses: membrane stress response (MSR), osmotic stress response (OSR), oxidative stress response (OxSR), nitrosative stress response (NxSR), and DNA damage stress response (DdSR). Moreover, a strong network of these stress responses was observed with type 3 secretion system (T3SS), general secretory proteins (GSPs), and different types of pili (T4P, Tad, and Tat). To the best of our knowledge, this is the first report on overall stress response management by Rs and the potential connection with secretion systems.

Chemoenzymatic total synthesis of nodulones C and D using a naphthol reductase of Magnaporthe grisea.

Herein, the asymmetric and chemoenzymatic synthesis of (R)-nodulone C, cis-nodulone D and related (R)-dihydronaphthalenone is reported. It involves multistep chemical synthesis of putative biosynthetic substrates followed by regio- and stereoselective reduction using a NADPH-dependent tetrahydroxynaphthalene reductase of Magnaporthe grisea to obtain chiral nodulones in a biomimetic fashion.

De novo synthesis of hybrid d-f block metal complex salts for electronic charge transport applications.

The advent of d-d type complex salts for designing smart functional materials with versatile utility inspired us to develop a novel type of M(II)-Ce(IV) complex salts [M(II) = Cu and Zn ions]. In this study, we present for the first time a holistic approach to design and prepare metal complex salts of the novel hybrid d-f block type, [Cu(bpy)2]2[Ce(NO3)6]2 (1), [Cu(phen)2(NO3)]2[Ce(NO3)6](HNO3) (2), [Zn(bpy)2(NO3)][ClO4] (3), and [Zn(phen)2(NO3)]2 [Ce(NO3)6] (4); [bpy = 2,2'-bipyridine; phen = 1,10-phenanthroline]. The intrinsic structural and morphological properties of the compounds have been revealed by employing a suite of analytical and spectroscopic methods. X-ray structural analysis reveals that the copper(II) centres in the cationic complex units of 1 and 2 adopt a highly distorted tetrahedral and a rare bicapped square pyramidal coordination geometry, respectively. The zinc(II) ions in both 3 and 4 adopt the rare bicapped square pyramidal geometry while the cerium(IV) ions in 1, 2 and 4 exist in a dodecahedral geometry. Investigation of supramolecular interactions reveals that intermolecular O⋯H and O⋯π short contacts bind the complex units in 1, while predominant π⋯π interactions, along with O⋯H and O⋯π short contacts, produce the binding force among the complex units in 2. We further employed the complex salts (1-4) to construct Schottky devices to reveal the role of these new complex salts in the charge-transport phenomenon. The carrier mobilities (µ) for salts 1-4 were determined to be 1.76 × 10-6, 9.02 × 10-6, 1.86 × 10-8, and 4.31 × 10-8 m2 V-1 s-1, with respective transit times (τ) of 439, 85, 4.17 × 103, and 1.79 × 103 ns, which suggest that complex salt 2 is the best candidate with the highest transport properties among all the complex salts. A crystal engineering perspective sheds light on the charge-transport properties of the complex salts, emphasizing the attribution of the best performance of 2 to its predominant π⋯π interactions. The synthesis of this new type of complex salts, their physicochemical properties and their charge-transport applications envisage great promise for the development of novel crystalline materials with smart functionalities.

Temperature-Reliant Dynamic Properties and Elasto-Plastic to Plastic Crystal (Rotator) Phase Transition in a Metal Oxyacid Salt.

Although, dynamic crystals are attractive for use in many technologies, molecular level mechanisms of various solid-state dynamic processes and their interdependence, remain poorly understood. Here, we report a rare example of a dynamic crystal (1), involving a heavy transition metal, rhenium, with an initial two-face elasticity (within ≈1 % strain), followed by elasto-plastic deformation, at room temperature. Further, these crystals transform to a rotator (plastic) crystal phase at ≈105 °C, displaying exceptional malleability. Qualitative and quantitative mechanical tests, X-ray diffraction, µ-Raman and polarized light microscopy experiments reveal that the elasto-plastic deformation involves both partial molecular rotations and slip, while malleability in the rotator phase is facilitated by reorientational motions and increased symmetry (slip planes). Our work, connecting the plastically bendable (1D or 2D) crystals with the rotator phases (3D), is important for designing multi-functional dynamic crystals.

Synthesis of rhein and diacerein: a chemoenzymatic approach using anthrol reductase of Talaromyces islandicus.

Herein, we report two methods for the synthesis of the osteoarthritis drug rhein and its prodrug diacerein using a chemoenzymatic approach. The strategy relies on the use of an NADPH-dependent anthrol reductase of Talaromyces islandicus (ARti-2), which mediates the regioselective and reductive deoxygenation of anthraquinones. The work further implies similar biosynthesis of rhein in fungi.

Autonomous self-repair in piezoelectric molecular crystals.

Living tissue uses stress-accumulated electrical charge to close wounds. Self-repairing synthetic materials, which are typically soft and amorphous, usually require external stimuli, prolonged physical contact, and long healing times. We overcome many of these limitations in piezoelectric bipyrazole organic crystals, which recombine following mechanical fracture without any external direction, autonomously self-healing in milliseconds with crystallographic precision. Kelvin probe force microscopy, birefringence experiments, and atomic-resolution structural studies reveal that these noncentrosymmetric crystals, with a combination of hydrogen bonds and dispersive interactions, develop large stress-induced opposite electrical charges on fracture surfaces, prompting an electrostatically driven precise recombination of the pieces via diffusionless self-healing.

Multistate Switching of Spin Selectivity in Electron Transport through Light-Driven Molecular Motors.

It is established that electron transmission through chiral molecules depends on the electron's spin. This phenomenon, termed the chiral-induced spin selectivity (CISS), effect has been observed in chiral molecules, supramolecular structures, polymers, and metal-organic films. Which spin is preferred in the transmission depends on the handedness of the system and the tunneling direction of the electrons. Molecular motors based on overcrowded alkenes show multiple inversions of helical chirality under light irradiation and thermal relaxation. The authors found here multistate switching of spin selectivity in electron transfer through first generation molecular motors based on the four accessible distinct helical configurations, measured by magnetic-conductive atomic force microscopy. It is shown that the helical state dictates the molecular organization on the surface. The efficient spin polarization observed in the photostationary state of the right-handed motor coupled with the modulation of spin selectivity through the controlled sequence of helical states, opens opportunities to tune spin selectivity on-demand with high spatio-temporal precision. An energetic analysis correlates the spin injection barrier with the extent of spin polarization.

Spin Filtering in Supramolecular Polymers Assembled from Achiral Monomers Mediated by Chiral Solvents.

In past studies, spin selective transport was observed in polymers and supramolecular structures that are based on homochiral building blocks possessing stereocenters. Here we address the question to what extent chiral building blocks are required for observing the chiral induced spin selectivity (CISS) effect. We demonstrate the CISS effect in supramolecular polymers exclusively containing achiral monomers, where the supramolecular chirality was induced by chiral solvents that were removed from the fibers before measuring. Spin-selective transport was observed for electrons transmitted perpendicular to the fibers' long axis. The spin polarization correlates with the intensity of the CD spectra of the polymers, indicating that the effect is nonlocal. It is found that the spin polarization increases with the samples' thickness and the thickness dependence is the result of at least two mechanisms: the first is the CISS effect, and the second reduces the spin polarization due to scattering. Temperature dependence studies provide the first support for theoretical work that suggested that phonons may contribute to the spin polarization.

Overview on the role of heavy metals tolerance on developing antibiotic resistance in both Gram-negative and Gram-positive bacteria.

Environmental health is a critical concern, continuously contaminated by physical and biological components (viz., anthropogenic activity), which adversely affect on biodiversity, ecosystems and human health. Nonetheless, environmental pollution has great impact on microbial communities, especially bacteria, which try to evolve in changing environment. For instance, during the course of adaptation, bacteria easily become resistance to antibiotics and heavy metals. Antibiotic resistance genes are now one of the most vital pollutants, provided as a source of frequent horizontal gene transfer. In this review, the environmental cause of multidrug resistance (MDR) that was supposed to be driven by either heavy metals or combination of environmental factors was essentially reviewed, especially focussed on the correlation between accumulation of heavy metals and development of MDR by bacteria. This kind of correlation was seemed to be non-significant, i.e. paradoxical. Gram-positive bacteria accumulating much of toxic heavy metal (i.e. highly stress tolerance) were unlikely to become MDR, whereas Gram-negative bacteria that often avoid accumulation of toxic heavy metal by efflux pump systems were come out to be more prone to MDR. So far, other than antibiotic contaminant, no such available data strongly support the direct influence of heavy metals in bacterial evolution of MDR; combinations of factors may drive the evolution of antibiotic resistance. Therefore, Gram-positive bacteria are most likely to be an efficient member in treatment of industrial waste water, especially in the removal of heavy metals, perhaps inducing the less chance of antibiotic resistance pollution in the environment.