Water-Repellent Galvanized Steel Surfaces Obtained by Sintering of Zinc Nanopowder.

Galvanized steel surfaces are widely used in industry as a solution to prevent corrosion of steel tools that operate in outdoor or corrosive and oxidative environments. These objects are coated with a zinc protective layer deposited by hot dip galvanization. Turning the surface of galvanized steel tools into superhydrophobic may lead to very useful functionalities, although it may be a difficult task, because the preservation of the thin zinc layer is a claim. We propose herein the use of a bottom-up approach based on sandblasting, followed by sintering of zinc nanoparticles on the galvanized steel substrate, which allowed us to produce a zinc-made hierarchical structure required for superhydrophobicity. These samples acquired a double-scale structure that led to superhydrophobicity when they were later hydrophobized with a thin fluoropolymer layer. We found that sandblasting might be useful but not mandatory, unlike the sintering process, which was essential to reach superhydrophobicity. We found that, under certain experimental conditions, the surfaces showed outstanding water-repellent properties. We observed that the sandblasting on galvanized steel caused more damage than the sintering process. Sintering of low-melting-point metal nanoparticles was revealed as a promising strategy to fabricate functional metallic surfaces.

Mechanical Durability of Low Ice Adhesion Polydimethylsiloxane Surfaces.

Elastomeric surfaces and oil-infused elastic surfaces reveal low ice adhesion, in part because of their deformability. However, these soft surfaces might jeopardize their mechanical durability. In this work, we analyzed the mechanical durability of elastic polydimethylsiloxane (PDMS) surfaces with different balances between elasticity and deicing performances. The durability was studied in terms of shear/tensile ice adhesion strength before and after different wear tests. These tests consisted of abrasion/erosion cycles using standard procedures aimed to reproduce different environmental wearing agents. The main objective is to evaluate if our PDMS surfaces can become long-lasting solutions for ice removal in real conditions. We found that our elastic surfaces show excellent durability. After the wear tests, the ice adhesion strength values remained low or even unaltered. Although the oil-infused PDMS surface was the softest one, it presented considerable durability and excellent low ice adhesion, being a promising solution.

Adsorbed Mass of Polymers on Self-Assembled Monolayers: Effect of Surface Chemistry and Polymer Charge.

The adsorbed mass of polymers on surfaces with different chemistry is presented, and the related adsorption mechanism is discussed. Strong and weak polyelectrolytes of negative and positive charge are studied, as well as an uncharged polymer. Self-assembled monolayers of alkanethiols on gold are used in reflectometry and quartz crystal microbalance (QCM-D) experiments as adsorbing substrates bearing different terminal moieties, namely, methyl, hydroxyl, carboxyl, and amine groups. The various polymer-surface combinations allow the systematic investigation of the role of surface chemistry and polymer charge on adsorbed amount. Interactions of different nature and range drive polymer adsorption: the measured adsorbed amounts reveal information about their relative contribution. When electrostatic chain-surface attraction is present, the largest adsorbed masses are observed. However, significant mass is measured even when an electrostatic barrier to adsorption is present, suggesting the importance of forces of nonelectrostatic origin, which include both hydrophobic interactions and specific forces acting at short distances. This mechanism results in large adsorbed amounts for the adsorption of weak polyelectrolytes, and it is apparent especially in the adsorption behavior of a neutral polymer.