RESUMO
Rainwater Electro-Galvanic Alkalization (EGA) was performed using copper and magnesium (1:1) electrode. Efficiently removal of pollutants without external energy consumption was carried out, in addition essential ions were dosed for alkalization of rainwater. The optimal system conditions were obtained using response surface methodology (RSM) by considering the following operating variables: flow rate and concentration of the supporting electrolyte (NaCl and CaCl2). Furthermore, the maximum efficiency of nitrate, ammoniacal nitrogen, colour, and turbidity removal was evaluated. The results showed that the response variables were mainly sensitive to the type of supporting electrolyte used and the flow rate. Under experimental conditions of 0.009 M (NaCl) and 20â mL min-1, the removal rate was 74.19%, 72.49%, and 81.43% for nitrates, colour, and turbidity, respectively, and the lowest concentration of ammoniacal nitrogen (0.99mgL-1) was obtained. The kinetic models for nitrate and colour were fitted to zero-order models with k=0.33mgL-1min-1 and k=0.933Pt-Co, respectively. In addition, turbidity was fitted to a first-order model (k=0.1661min-1), and ammoniacal nitrogen was fitted to a second-order model (k=0.0217Lmg-1min-1). The concentration increases of minerals such as Ca and Mg, which rises the rainwater alkalinity after treatment (pH shift from 6.1 to 8.91), was determined by inductively coupled plasma (ICP) analysis.
RESUMO
The physicochemical treatment (PT) of food industry wastewater was investigated. In the first stage, calcium magnesium acetate (CaMgAc4) was synthesized using eggshell (biocalcium), magnesium oxide and acetic acid in a 1:1:1 stoichiometric ratio. In the synthesis process, the thermodynamic parameters (ΔH, ΔS and ΔG) indicated that the reaction was endothermic and spontaneous. The samples were characterized by infrared spectroscopy (IR), scanning electronic microscopy (SEM), X-ray diffraction (XRD) and electron X-ray dispersive spectroscopy (EDS). CaMgAc4 was used to precipitate the phosphate matter. IR analysis revealed that the main functional groups were representative of the acetate compounds and the presence of OH- groups and carbonates. In the physicochemical treatment, a response surface design was used to determine the variables that influence the process (pH, t, and concentration), and the response variable was phosphorus removal. The treatments were carried out in the wastewater industry with an initial concentration of 658 mg/L TP. The optimal conditions of the precipitation treatment were pH 12, time 12 min, and a CaMgAc4 concentration of 13.18 mg/L. These conditions allowed the total elimination (100%) of total phosphorus and phosphates, 81.43% BOD5 and 81.0% COD, 98.9% turbidity, 95.01% color, and 92% nitrogen matter.
