Formic Acid as a Dopant for Atmospheric Pressure Chemical Ionization for Negative Polarity of Ion Mobility Spectrometry and Mass Spectrometry.

Formic acid (FA) is introduced as a potent dopant for atmospheric pressure chemical ionization (APCI) for ion mobility spectrometry (IMS) and mass spectrometry (MS). The mechanism of chemical ionization with the FA dopant was studied in the negative polarity using a corona discharge (CD)-IMS-MS technique in air. Standard reactant ions of the negative polarity present in air are O2-·(CO2)n·(H2O)m (m = 0, 1 and n = 1, 2) clusters. Introduction of the FA dopant resulted in the production of HCOO-·FA reactant ions. The effect of the FA dopant on the APCI of different classes of compounds was investigated, including plant hormones, pesticides, acidic drugs, and explosives. FA dopant APCI resulted in deprotonation and/or adduct ion formation, [M - H]- and [M + HCOO]-, respectively. Supporting density functional theory (DFT) calculations showed that the ionization mechanism depended on the gas-phase acidity of the compounds. FA dopant APCI led to the improvement of detection sensitivity, suppression of fragmentation, and changes in the ion mobilities of the analyte ions for analytes with suitable molecular structures and gas acidity.

Effect of ion source polarity and dopants on the detection of auxin plant hormones by ion mobility-mass spectrometry.

Ion mobility spectrometry (IMS) equipped with a corona discharge (CD) ion source was used for measurement of three auxin plant hormones including indole-3-acetic acid (IAA), indole-3-propionic acid (IPA), and indole-3-butyric acid (IBA). The measurements were performed in both positive and negative polarities of the CD ion source. Dopant gases NH3, CCl4, and CHBr3 were used to modify the ionization mechanism. A time-of-flight mass spectrometer (TOFMS) orthogonal to the IMS cell was used for identification of the product ions. Density functional theory was used to rationalize formation of the ions, theoretically. The mixtures of the auxins were analyzed by CD-IMS. The separation performance depended on the ion polarity and the dopants. In the positive polarity without dopants, auxins were ionized via protonation and three distinguished peaks were observed. Application of NH3 dopant resulted in two ionization channels, protonation, and NH4+ attachment leading to peak overlapping. In the negative polarity, two ionization reactions were operative, via deprotonation and O2- attachment. The separation of the monomer peaks was not achieved while the peaks of anionic dimers [2 M-H]- were separated well. The best LOD (4 ng) was obtained in negative polarity with CCl4 dopant. Methylation (esterification) of IAA improved LODs by about one order.

Negative Atmospheric Pressure Chemical Ionization of Chlorinated Hydrocarbons Studied by Ion Mobility Spectrometry (IMS) and IMS-MS Techniques.

Negative polarity atmospheric pressure chemical ionization of selected chlorinated hydrocarbons (tetrachloromethane CCl4 and hexachloroethane C2Cl6, dichloromethane CH2Cl2, trichloromethane CHCl3, 1,1,1,2-tetrachloroethane 1,1,1,2-C2H2Cl4, 1,1,2,2-tetrachloroethane 1,1,2,2,-C2H2Cl4 1,1,2-trichloroethane 1,1,2-C2H3Cl3, and 1,1,2-trichloroethane 1,1,2-C2HCl3) was studied using ion mobility spectrometry (IMS) and IMS combined with time-of-flight mass spectrometer (IMS-TOF MS) techniques, in the dry air and at two different drift gas temperatures (323 and 373 K). The ionization was performed using the O2-CO2(H2O)0,1 reactant ions (RIs), and the dominant ionization reaction was the dissociative electron transfer. The ionization resulted in the appearance of Cl- ions for all substances and [O2H..Cl]- ions, which were absent in the case of perchlorinated substances. The quantum-chemical calculations at the density functional theory level of theory using the ωB97X-D/aug-cc-pVTZ method were performed to calculate the thermochemical data (heats of formations, electron affinities, reaction enthalpies) for RIs, neutral substances, neutral fragments, and the anionic fragments. The calculations supported the experimental observations regarding the endothermicity of the Cl- channel for all substances and the exothermicity of the [O2H..Cl]- channel for the tetrachloro- and trichloroethanes.

An atmospheric pressure field effect ionisation source for ion mobility spectrometry.

An atmospheric Pressure Field Effect (APFE) ionisation source for drift tube ion mobility spectrometry has been developed for operation in positive and negative polarities. The formation of negative and positive ions in synthetic air was studied and compared with the Atmospheric Pressure Corona Discharge (APCD) ionisation source. The APFE ionisation source is of point-to-plane geometry with a 10 µm Pt point electrode, a stainless steel plate electrode and ultra-high resistance (20 GΩ) current limiters. In the case of negative polarity, the ionisation source was able to generate Reactant Ions (RIs) O2-(H2O)n and O2-CO2(H2O)n, and in the case of positive polarity, stable production of H+(H2O)n RI was achieved in two different gas flow regimes of the IMS. RIs formed in the APFE in both polarities have made it a reliable chemical ionisation source at atmospheric pressure. The identification of the ions generated in the APFE was performed using an Ion Mobility Spectrometer coupled with an orthogonal acceleration Time of Flight Mass Spectrometer (IMS-oa-TOF-MS). The chemical ionisation of molecules was demonstrated for the APFE ionisation source in positive (2,6-di-tert-butyl-pyridine) and negative (tetrachloromethane) polarities.

Development of Microchip Isotachophoresis Coupled with Ion Mobility Spectrometry and Evaluation of Its Potential for the Analysis of Food, Biological and Pharmaceutical Samples.

An online coupling of microchip isotachophoresis (µITP) with ion mobility spectrometry (IMS) using thermal evaporation interface is reported for the first time. This combination integrates preconcentration power of the µITP followed by unambiguous identification of trace compounds in complex samples by IMS. Short-chain carboxylic acids, chosen as model analytes, were first separated by the µITP in a discontinuous electrolyte system at pH 5-6, and subsequently evaporated at 130 °C during their transfer to the IMS analyzer. Various parameters, affecting the transfer of the separated sample components through the evaporation system, were optimized to minimize dispersion and loss of the analytes as well as to improve sensitivity. The following analytical attributes were obtained for carboxylic acids in the standard solutions: 0.1-0.3 mg L-1 detection limits, 0.4-0.9 mg L-1 quantitation limits, linear calibration range from the quantitation limit to 75 mg L-1, 0.2-0.3% RSD of the IMS response and 98-102% accuracy. The analytical potential of the developed µITP-IMS combination was demonstrated on the analysis of various food, pharmaceutical and biological samples, in which the studied acids are naturally present. These include: apple vinegar, wine, fish sauce, saliva and ear drops. In the real samples, 0.3-0.6% RSD of the IMS response and 93-109% accuracy were obtained.

Analysis of positional isomers of 2-3-4-alkoxyphenylcarbamic acid derivatives by a combination of TLC and IMS.

In this study, we have demonstrated a separation of positional isomers of some derivatives of alkoxyphenylcarbamic acid. These compounds belong to drugs with local anesthetics activity. The low volatility compounds were analysed by a Thin Layer Chromatography (TLC) and Ion Mobility Spectrometry (IMS) using diode laser desorption for sample introduction to IMS. This combined approach allowed the identification of compounds. Also, we have carried out IMS studies of all compounds and determined their ion mobilities The ion mobilities were increasing with the geometry change from position ortho to para of alkoxy chain, which is in agreement with their different collision cross section (CCS).

Study of atmospheric pressure chemical ionization of phthalates in air by ion mobility spectrometry/mass spectrometry.

RATIONALE: Phthalates are widely used in consumer products in the chemical industries. Due to their abundance in the milieu, their potentially harmful effect on the environment, human and animal health there is a need for sensitive and fast methods for their detection. METHODS: Positive polarity Corona Discharge Atmospheric Pressure Chemical Ionization (CD-APCI) in the air was applied for ionization of phthalates. The ionization method for the phthalates was studied by atmospheric pressure Ion Mobility Spectrometry (IMS) and hybrid IMS/orthogonal acceleration Time-of-Flight Mass spectrometry (IMS-oaTOF-MS). RESULTS: CD-APCI IMS and MS spectra of selected phthalates (dimethyl phthalate, diethyl phthalate, diethyl isophthalate, diethyl terephthalate, dipropyl phthalate, diisopropyl phthalate, dibutyl phthalate, diisobutyl phthalate, and dibutyl terephthalate) were recorded. In the case of the ortho- and "iso"-isomers exclusively the protonated molecular ions [M + H]+ were detected. In the case of the para- and meta-isomers and regioisomers, APCI resulted in the appearance of hydrated protonated molecular ions [M + H]+ ·(H2 O)0,1,2 . The ion mobilities, collision cross-sections of these ions in air, as well as the limits of detection (LODs) for the phthalate vapors, were determined. In the case of isomeric phthalates, we have demonstrated the potential of the IMS technique for their separation. CONCLUSIONS: The results show that CD-APCI in combination with IMS and IMS-oaTOF-MS is a suitable method for the fast and sensitive detection of phthalates with the potential to separate some isomers.

Fast quantification of whisky lactone in oak wood by ion mobility spectrometer.

An Ion Mobility Spectrometry (IMS) apparatus has been used to detect the ß-methyl-γ-octalactone (Whisky Lactone - WL) standard in the air and as well WL vapours originating from the oak wood samples. The IMS was equipped with Atmospheric Pressure Chemical Ionisation (APCI) ion source based on a Corona Discharge (CD) and was operated in the positive polarity. The IMS spectrum of WL exhibits two peaks, a monomer with reduced ion mobility value K0 = 1.39 cm2V-1s-1 and dimer K0 = 1.09 cm2V-1s-1. Using Ion Mobility orthogonal acceleration Time of Flight mass spectrometer (IMS-oaTOF MS) these peaks were identified as protonated monomer M.H+.(H2O)0,1 and dimer M2.H+ ions respectively. The limit of detection study resulted in LOD for WL of 50 ppbv. Detection of WL from oak wood samples of different "Quality Level" (QL) categories (categories 1 to 10), indicated strong correlation between the QL category number and the response of the IMS.

Isomer and conformer selective atmospheric pressure chemical ionisation of dimethyl phthalate.

In this work we have studied the ionisation mechanism of Atmospheric Pressure Chemical Ionisation (ACPI) for three isomers of dimethyl phthalate (dimethyl phthalate - DMP (ortho- isomer), dimethyl isophthalate - DMIP (meta) and dimethyl terephthalate - DMTP (para)) using Ion Mobility Spectrometry (IMS) and IMS combined with an orthogonal acceleration Time of Flight Mass Spectrometer (oa-TOF MS). The molecules were chemically ionised using reactant ions H+·(H2O)n (n = 3 and 4). The positive IMS and IMS-oaTOF mass spectra of the isomers showed significant differences in the ion mobilities and in the ion composition. The IMS - oaTOF spectra consisted of clusters of ions M·H+·(H2O)n with different degrees of hydration (n = 0, 1, 2, 3) for different isomers. In the case of the DMP isomer, we have observed almost exclusive formation of M·H+ by proton transfer ionisation, while in the case of DMIP and DMTP, hydrated ions M·H+·(H2O)n (n = 1, 2, 3) and M·H+·(H2O)n (n = 0, 1, 2) respectively were detected, formed via adduct formation reactions. This behaviour was elucidated by differences in ionisation processes. In order to elucidate the ionisation processes we have carried out DFT calculations of the structures and energies of the neutral and protonated and hydrated isomers (for different conformers) and their corresponding proton affinities (PA) and hydration energies.