The use of corticosteroids in the lateral sinus augmentation surgical procedure: A systematic review and meta-analysis.

BACKGROUND: The lateral maxillary sinus augmentation (MSA) procedure has good predictability in terms of the success of bone regeneration with a low incidence of postoperative infections, estimated between 2% and 5.6%. Although the use of antibiotics is an established and standardized prophylactic measure for MSA procedures, the addition of corticosteroids still varies among clinician preference and clinical judgment. PURPOSE: The aim of this systematic review was to identify whether the administration of corticosteroids during the MSA surgical procedure affects postoperative symptoms including swelling, pain, and infection rate. MATERIALS AND METHODS: A literature search through PubMed, EMBASE, Ovid MEDLINE, and Web of Science indices, according to PICO criteria, was conducted to identify whether MSA peri-operative use of corticosteroids reduces the incidence of complications and patient morbidity. A single arm meta-analysis was performed due to the lack of randomized controlled trials (RCTs) comparing groups treated with or without peri-operative corticosteroids. The intracluster correlation co-efficient (ICC) and design effect were calculated to adjust for the clustering design. RESULTS: In the 37 studies included, a total of 1599 patients (378 Cort, 1221 No-Cort) were analyzed. Before and after taking account of clustering, there was statistically significant effect of corticosteroids on swelling, pain, wound dehiscence, trismus, and hematoma. The complication rates postoperatively were comparable between the two study groups, however slight differences existed in the incidence of active suppuration (1.7% [95% CI 0.7-3.9] Cort vs. 3.2% [2.2-4.5] No-Cort), wound dehiscence (3.9% [1.3-11.2] Cort vs. 2.1% [1.0-4.1] No-Cort) and trismus (2.7% [0.8-8.4] Cort vs. 1.4% [0.8-2.5] No-Cort). CONCLUSIONS: Although the event rate of the 1-to-2-week postoperative complications did not differ between the two groups, the lack of conclusive data and research comparing peri-operative corticosteroid use makes it impossible to draw definitive conclusions and more evidence and studies designed for this specific purpose are needed.

The occlusal precision of milled versus printed provisional crowns.

OBJECTIVES: The aim of this study was to compare the occlusal precision of computer-aided-design/ computer-assisted-manufacturing (CAD/CAM) milled versus 3D printed polymethylmethacrylate (PMMA) temporary prosthetic crowns , starting from the same digital CAD design. MATERIALS AND METHODS: The study sample included 34 patients presenting 34 premolars in need of prosthetic rehabilitation: a total of 68 temporary crowns were manufactured, 34 of which milled and 34 printed. Immediately after manufacturing, the milled and printed provisionals were scanned with a desktop scanner (E1, 3Shape) to obtain STL files, that were superimposed to the original CAD design in order to identify the occlusal trueness (Analysis A). A second occlusal comparison was performed by scanning both kind of provisional after being placed intraorally with Trios scanner (3 Shape); intraoral scans were obtained in order to compare STL files of provisionals before and after occlusal adjustments (Analysis B).  The occlusal trueness was identified at three reference points, P1 (vestibular cusp), P2 (palatal / lingual cusp), P3 (central fossa). The statistical analysis was performed using the R 3.4.3 statistical software (The R Foundation for Statistical Computing), with a significance level of p <0.05. RESULTS: Overall, the printed crowns showed lower occlusal differences than the milled crowns, when compared to the CAD design file, with a statistically significant difference in P1 (difference of 0.025 ± 0.046 mm), P2 (difference of 0.027 ± 0 0.044 mm) and P3 ( difference of 0.018 ± 0.050) for Analysis A (p <0.05). In the Analysis B the direct comparison between the degree of average difference between the pre-adjustment and the post-occlusal adjustment of the milled and printed crowns shows that the printed crowns have lower occlusal mean difference values in all three points compared to the milled ones (difference of 0.146 ± 0.273 mm in P1, 0.285 ± 0.360 mm in P2 and 0.257 ± 0.277 mm in P3). CONCLUSIONS: Within the limitation of this study, the data obtained showed a better occlusal surface dimensional accuracy of the 3D printed provisional crowns, when compared to the milled ones. Comparing the results obtained, it is possible to assume that the intraoral scans also had a contribution to occlusion, beside the manufacturing method. 3D printing can be successfully applied for manufacturing temporary PMMA crowns.

Peri-Implantitis Regenerative Therapy: A Review.

The surgical techniques available to clinicians to treat peri-implant diseases can be divided into resective and regenerative. Peri-implant diseases are inflammatory conditions affecting the soft and hard tissues around dental implants. Despite the large number of investigations aimed at identifying the best approach to treat these conditions, there is still no universally recognized protocol to solve these complications successfully and predictably. This review will focus on the regenerative treatment of peri-implant osseous defects in order to provide some evidence that can aid clinicians in the approach to peri-implant disease treatment.

Sport and Dental Traumatology: Surgical Solutions and Prevention.

Trauma is a worldwide cause of millions of deaths and severe injuries every year, all over the world. Despite the limited extension of the oral region compared to the whole body, dental and oral injuries account for a fairly high percentage of all body traumas. Among head and neck traumas, dental and facial injuries are highly correlated to sport activities, and their management can be a real challenge for practitioners of any specialty. In case of trauma directed to periodontal structures, restorative and endodontic solutions may not be sufficient to achieve a definitive and long-lasting treatment. This article aims to illustrate surgical options and appliances to prevent dental injuries that may be available to the clinicians treating dental trauma involving oral soft and hard tissues.

Complex Implant-Prosthetic Rehabilitation Following Sports Trauma with 14 Years of Follow-Up: Case Report.

Tooth loss after traumatic dental injuries (TDI) often requires rehabilitation with a multidisciplinary treatment plan. In growing patients, the therapeutic approach may be different than in adults; the scientific literature offers alternative solutions even if they involve long, complex and uncomfortable treatments. Among the possible therapeutic options, implant-prosthetic treatment through the use of mini-implants is presented in this complex case report with a 14-year follow-up.

Volumetric Changes Following Lateral Guided Bone Regeneration.

Resorbable membranes are well described and employed for horizontal guided bone regeneration (GBR). However, the currently available literature does not provide information on the bone volumetric changes during the healing that follows GBR procedures and dental implant placement. Therefore, the aim of this pilot study was to initially analyze the volumetric bone changes after treating pristine edentulous mandibular defects with lateral GBR using freeze-dried bone allograft (FDBA) and collagen resorbable membrane. Six patients were selected for the analysis. Clinical changes in bone volume before and after GBR were measured. In addition, digital volumetric analysis of the augmented ridges was performed preoperatively, as well as 4 and 6 months after the GBR procedure. At the time of dental implant placement, bone cores were collected during the osteotomy for histologic analysis. Data on volume changes showed a mean of 297.5 ± 134 mm3 augmented bone volume at 4 months with 5% ± 3.78% resorption from 4 to ≥ 6 months. Histologic bone core analysis showed 44.9% plusmn; 5.1% mineralization in the area of augmentation. Within the limitations of this pilot study, resorbable membranes exhibited reliability for GBR in intercalated mandibular defects, providing sufficient bone volume gain at ≥ 6 months for implant stabilization and limited resorption during graft healing.

Esthetic Management of Peripheral Giant Cell Granuloma Affecting a Dental Implant in the Esthetic Zone.

INTRODUCTION: A size increase of the gingiva can be a manifestation of gingival disease. While gingival lesions can affect periodontal tissue, only few reports described the association between peripheral giant-cell granuloma (PGCG) with dental implants and their clinical management. Their clinical relevance is of a great interest since some lesions may lead to extensive bone resorption, esthetic alterations, or even tooth/implant loss. To the author's best knowledge, no specific guidelines for the treatment of PGCG affecting dental implant in the esthetic zone have been reported. The aim of this paper was to report an extensive PGCG associated with a dental implant in the esthetic area and its surgical management. CASE PRESENTATION: A 39-year-old suffered from concussive trauma on her anterior maxillary dentition leading to an expanded, purplish soft tissue lesion surrounding the implant provisional crown on right central maxillary incisor. After complete lesion excision, the implant neck was carefully and gently debrided. Histological analysis confirmed the diagnosis of PGCG. The patient was then evaluated weekly for the first 3 weeks then monthly. No episodes of recurrence were identified. After 16 weeks of undisturbed healing, a soft tissue augmentation via tunnel technique was elected as the first treatment option to improve esthetics. Final implant restoration was delivered. Follow up at 22 months from biopsy excluded any recurrence of PGCG with stability of peri-implant soft tissues. CONCLUSION: Excisional biopsy, careful removal of irritating factors, monitoring, and connective tissue grafting can esthetically improve a malpositioned implant and showed no recurrence over a period of 22 months.

Horizontal Bone Augmentation in the Anterior Esthetic Area of the Maxilla Using a Flap Design Adapted from Mucogingival Surgery in Association with PLA Membrane and ß-TCP.

Systematic reviews showed possible esthetic complications with the use of traditional flap designs after guided bone regeneration (GBR) procedures in the esthetic zone and the aim of this case series was to analyze hard and soft tissue changes over 18 months after these procedures. Healthy subjects requiring tooth extraction and single-implant placement in the anterior maxilla were enrolled in the study. Three months after tooth extraction and ridge preservation, a prosthetic-driven implant was placed. The horizontal bone deficiency was treated with a resorbable bone graft substitute (beta tricalcium phosphate [ß-TCP]) and a bioresorbable polylactic acid (PLA) membrane. Primary closure was obtained by a novel coronally advanced flap adapted from mucogingival techniques. Final metal-free implant restorations were delivered 4 months after placement. Clinical measurements, pictures, and radiographs were acquired after delivery of the final restoration (T1) and at the 18-month follow-up (T2). Digital impressions were taken at the time of tooth extraction (T-1) and implant insertion (baseline; T0) and at T2. Marginal bone level changes were assessed by radiographic analysis, while soft tissue changes were evaluated with ExoCad software. Student t test for paired data was used to detect differences between the different time points. Twelve subjects (7 men and 5 women; mean age: 63.7 ± 14 years) completed the study and received 15 implants. All implants healed uneventfully and were clinically osseointegrated and stable, showing no sign of infection. No GBR complications were noted. Statistically significant ridge-width changes were observed after extraction (T-1 vs T0 = -1.72 ± 0.30 mm; P = .00001) and after horizontal GBR (T0 vs T2 = 1.41 ± 0.64 mm; P = .00001). Radiographic bone levels after implant placement remained stable T0 to T2 (0.09 ± 0.08 mm). Periodontal parameters never exceeded physiologic levels. It can be concluded that GBR using a bioresorbable PLA membrane and resorbable ß-TCP bone graft in conjunction with a coronally advanced flap is a predictable procedure for horizontal bone augmentation with simultaneous implant placement in the esthetic area.

Denosumab-related osteonecrosis of the jaw: a report of 2 cases and review of the literature.

Bisphosphonates have been implicated in the induction of medication-related osteonecrosis of the jaw (MRONJ) since 2004. Since then, the spectrum of drugs implicated in the onset of MRONJ has broadened to include other antiresorptive and antiangiogenic drugs. Denosumab is an antiresorptive drug that has been on the market since 2010. Denosumab inhibits osteoclast formation, function, and survival and increases bone mineral density. As a result, denosumab is indicated for the treatment of osteoporosis and bone metastases. This article reports 2 cases of MRONJ associated with denosumab use. The characteristics and progression of MRONJ in patients who take denosumab are reviewed, and therapeutic measures are discussed.

The Fate of Lateral Ridge Augmentation: A Systematic Review and Meta-Analysis.

PURPOSE: Owing to volumetric changes after tooth extraction, lateral ridge augmentation has become a common procedure prior or simultaneous to implant placement. Nonetheless, little is known with regard to the dimensional remodeling after healing of these lateral ridge augmentation procedures. Hence, the purpose of this systematic review was to assess the stability of bone grafting material between augmentation procedures and final healing, in terms of resorption rate. MATERIALS AND METHODS: An electronic and hand literature search was conducted in several databases, such as the Cochrane Oral Health Group Trials Register, Embase, and Cochrane Central Register of Controlled Trials, up until February 2017. Only randomized controlled trials (RCTs) with a mean follow-up of at least 6 months after implant placement aiming to evaluate the stability of grafting material for lateral ridge augmentation were included and quantitatively analyzed. RESULTS: A total of 35 articles were evaluated; however, only 17 RCTs met the inclusion criteria. A total of 15 studies reported information on bone resorption, leading to a total sample of 304 implants. The estimated overall mean horizontal bone gain at the time of regeneration was 3.71 ± 0.24 mm, with 4.18 ± 0.56 mm for the block graft technique and 3.61 ± 0.27 mm for guided bone regeneration (GBR). The estimated overall net bone gain at final re-evaluation (11.9 ± 7.8) was 2.86 ± 0.23 mm. The estimated mean (± SD) resorption after 6 months was 1.13 ± 0.25 mm, with 0.75 ± 0.59 mm for the block graft technique and 1.22 ± 0.28 mm for GBR. The implant survival rate was 97% to 100%. CONCLUSION: Regardless of the material used for regeneration, different degrees of graft resorption should be expected. Given the sample of investigations analyzed in this review, block grafts seemed to maintain the volume of the initial augmentation site more than GBR techniques. During the initial stages of healing, the GBR technique experienced more changes compared with block grafts. The resorption of the xenograft group was inferior compared with the combination of xenograft and autologous bone groups. Consequently, overcorrection of the horizontal defects should be performed to compensate for the resorption of the grafting materials.