Increased summer temperature is associated with reduced calf mass of a circumpolar large mammal through direct thermoregulatory and indirect, food quality, pathways.

Climate change represents a growing ecological challenge. The (sub) arctic and boreal regions of the world experience the most rapid warming, presenting an excellent model system for studying how climate change affects mammals. Moose (Alces alces) are a particularly relevant model species with their circumpolar range. Population declines across the southern edge of this range are linked to rising temperatures. Using a long-term dataset (1988-1997, 2017-2019), we examine the relative strength of direct (thermoregulatory costs) and indirect (food quality) pathways linking temperature, precipitation, and the quality of two important food items (birch and fireweed) to variation in moose calf mass in northern Sweden. The direct effects of temperature consistently showed stronger relationships to moose calf mass than did the indirect effects. The proportion of growing season days where the temperature exceeded a 20 °C threshold showed stronger direct negative relationships to moose calf mass than did mean temperature values. Finally, while annual forb (fireweed) quality was more strongly influenced by temperature and precipitation than were perennial (birch) leaves, this did not translate into a stronger relationship to moose calf weight. The only indirect path with supporting evidence suggested that mean growing season temperatures were positively associated with neutral detergent fiber, which was, in turn, negatively associated with calf mass. While indirect impacts of climate change deserve further investigation, it is important to recognize the large direct impacts of temperature on cold-adapted species.

Estimation of Botanical Composition in Mixed Clover-Grass Fields Using Machine Learning-Based Image Analysis.

This study aims to provide an effective image analysis method for clover detection and botanical composition (BC) estimation in clover-grass mixture fields. Three transfer learning methods, namely, fine-tuned DeepLab V3+, SegNet, and fully convolutional network-8s (FCN-8s), were utilized to detect clover fractions (on an area basis). The detected clover fraction (CF detected ), together with auxiliary variables, viz., measured clover height (H clover ) and grass height (H grass ), were used to build multiple linear regression (MLR) and back propagation neural network (BPNN) models for BC estimation. A total of 347 clover-grass images were used to build the estimation model on clover fraction and BC. Of the 347 samples, 226 images were augmented to 904 images for training, 25 were selected for validation, and the remaining 96 samples were used as an independent dataset for testing. Testing results showed that the intersection-over-union (IoU) values based on the DeepLab V3+, SegNet, and FCN-8s were 0.73, 0.57, and 0.60, respectively. The root mean square error (RMSE) values for the three transfer learning methods were 8.5, 10.6, and 10.0%. Subsequently, models based on BPNN and MLR were built to estimate BC, by using either CF detected only or CF detected , grass height, and clover height all together. Results showed that BPNN was generally superior to MLR in terms of estimating BC. The BPNN model only using CF detected had a RMSE of 8.7%. In contrast, the BPNN model using all three variables (CF detected , H clover , and H grass ) as inputs had an RMSE of 6.6%, implying that DeepLab V3+ together with BPNN can provide good estimation of BC and can offer a promising method for improving forage management.

Comparative Analysis of Phenology Algorithms of the Spring Barley Model in APSIM 7.9 and APSIM Next Generation: A Case Study for High Latitudes.

Phenology algorithms in crop growth models have inevitable systematic errors and uncertainties. In this study, the phenology simulation algorithms in APSIM classical (APSIM 7.9) and APSIM next generation (APSIM-NG) were compared for spring barley models at high latitudes. Phenological data of twelve spring barley varieties were used for the 2014-2018 cropping seasons from northern Sweden and Finland. A factorial-based calibration approach provided within APSIM-NG was performed to calibrate both models. The models have different mechanisms to simulate days to anthesis. The calibration was performed separately for days to anthesis and physiological maturity, and evaluations for the calibrations were done with independent datasets. The calibration performance for both growth stages of APSIM-NG was better compared to APSIM 7.9. However, in the evaluation, APSIM-NG showed an inclination to overestimate days to physiological maturity. The differences between the models are possibly due to slower thermal time accumulation mechanism, with higher cardinal temperatures in APSIM-NG. For a robust phenology prediction at high latitudes with APSIM-NG, more research on the conception of thermal time computation and implementation is suggested.

Bamboo Plantations for Phytoremediation of Pig Slurry: Plant Response and Nutrient Uptake.

On Réunion Island, a French overseas territory located in the western Indian Ocean, increasing pig livestock farming is generating large quantities of slurry. Most of it is spread on a little agricultural land due to the insular context. Considering the limitation of the quantities that can be spread on agricultural areas (European "Nitrate Directive" 91/676/EEC), the use of wastewater treatment systems using phytoremediation principles is an attractive option for the pig slurry treatment. A wastewater treatment system using bamboo groves was assessed for the pig slurry treatment. Three field plots were designed on an agricultural area and planted with 40 bamboo clumps on each plot. A total of 67 m3 of pig slurry was spread on two plots in two forms: raw slurry and centrifuged slurry. The latter plot was watered with tap water. The total amount of nitrogen, phosphorus and potassium was 5.3, 1.4 and 5.5 t·ha-1, respectively, for the raw slurry treatment and 4.2, 0.4 and 5.1 t·ha-1, respectively, for the centrifuged slurry treatment. The response of bamboo species to pig slurry application was determined using morphologic parameters, Chlorophyll a fluorescence measurements and biomass yield. Compared to the control, the biomass increased by 1.8 to 6 times, depending on the species and the form of slurry. Depending on the species, the average biomass ranged from 52 to 135 t.DM.ha-1 in two years of experiment.

Exploring the potential of PROCOSINE and close-range hyperspectral imaging to study the effects of fungal diseases on leaf physiology.

The detection of plant diseases, including fungi, is a major challenge for reducing yield gaps of crops across the world. We explored the potential of the PROCOSINE radiative transfer model to assess the effect of the fungus Pseudocercospora fijiensis on leaf tissues using laboratory-acquired submillimetre-scale hyperspectral images in the visible and near-infrared spectral range. The objectives were (i) to assess the dynamics of leaf biochemical and biophysical parameters estimated using PROCOSINE inversion as a function of the disease stages, and (ii) to discriminate the disease stages by using a Linear Discriminant Analysis model built from the inversion results. The inversion results show that most of the parameter dynamics are consistent with expectations: for example, the chlorophyll content progressively decreased as the disease spreads, and the brown pigments content increased. An overall accuracy of 78.7% was obtained for the discrimination of the six disease stages, with errors mainly occurring between asymptomatic samples and first visible disease stages. PROCOSINE inversion provides relevant ecophysiological information to better understand how P. fijiensis affects the leaf at each disease stage. More particularly, the results suggest that monitoring anthocyanins may be critical for the early detection of this disease.

Testing of the European Union exposure-response relationships and annoyance equivalents model for annoyance due to transportation noises: The need of revised exposure-response relationships and annoyance equivalents model.

An in situ survey was performed in 8 French cities in 2012 to study the annoyance due to combined transportation noises. As the European Commission recommends to use the exposure-response relationships suggested by Miedema and Oudshoorn [Environmental Health Perspective, 2001] to predict annoyance due to single transportation noise, these exposure-response relationships were tested using the annoyance due to each transportation noise measured during the French survey. These relationships only enabled a good prediction in terms of the percentages of people highly annoyed by road traffic noise. For the percentages of people annoyed and a little annoyed by road traffic noise, the quality of prediction is weak. For aircraft and railway noises, prediction of annoyance is not satisfactory either. As a consequence, the annoyance equivalents model of Miedema [The Journal of the Acoustical Society of America, 2004], based on these exposure-response relationships did not enable a good prediction of annoyance due to combined transportation noises. Local exposure-response relationships were derived, following the whole computation suggested by Miedema and Oudshoorn [Environmental Health Perspective, 2001]. They led to a better calculation of annoyance due to each transportation noise in the French cities. A new version of the annoyance equivalents model was proposed using these new exposure-response relationships. This model enabled a better prediction of the total annoyance due to the combined transportation noises. These results encourage therefore to improve the annoyance prediction for noise in isolation with local or revised exposure-response relationships, which will also contribute to improve annoyance modeling for combined noises. With this aim in mind, a methodology is proposed to consider noise sensitivity in exposure-response relationships and in the annoyance equivalents model. The results showed that taking into account such variable did not enable to enhance both exposure-response relationships and the annoyance equivalents model.

A Simulated Environment Experiment on Annoyance Due to Combined Road Traffic and Industrial Noises.

Total annoyance due to combined noises is still difficult to predict adequately. This scientific gap is an obstacle for noise action planning, especially in urban areas where inhabitants are usually exposed to high noise levels from multiple sources. In this context, this work aims to highlight potential to enhance the prediction of total annoyance. The work is based on a simulated environment experiment where participants performed activities in a living room while exposed to combined road traffic and industrial noises. The first objective of the experiment presented in this paper was to gain further understanding of the effects on annoyance of some acoustical factors, non-acoustical factors and potential interactions between the combined noise sources. The second one was to assess total annoyance models constructed from the data collected during the experiment and tested using data gathered in situ. The results obtained in this work highlighted the superiority of perceptual models. In particular, perceptual models with an interaction term seemed to be the best predictors for the two combined noise sources under study, even with high differences in sound pressure level. Thus, these results reinforced the need to focus on perceptual models and to improve the prediction of partial annoyances.