One-pot, microwave (MW)-assisted production of furfural from almond-, oil-, and wine-derived co-products through biorefinery-based approaches.

This work outlines the first microwave (MW)-assisted protocol for the production of biofuel precursor furfural (FF) from the raw agricultural waste almond hull (AH), olive stone (OS), and the winemaking-derived grape stalk (GS), grape marc (GM) and exhausted grape marc (EGM) through a one-pot synthesis process. To enhance the overall yield, a catalytic process was firstly developed from xylose, major constituent of hemicellulose present in lignocellulosic biomass. This method afforded FF with 100 % selectivity, yielding over 85 % in isolated product when using H2SO4, as opposed to a 37 % yield with AlCl3·6H2O, at 150 °C in only 10 min. For both catalysts, the developed methodology was further validated, proving adaptable and efficient in producing the targeted FF from the aforementioned lignocellulosic raw materials. More specifically, the employment of AlCl3·6H2O resulted in the highest selectivity (up to 89 % from GM) and FF yield (42 % and 39 % molar from OS and AH, respectively), maintaining notable selectivity for the latter (61 and 48 % from AH and OS). At this regard, and considering the environmental factor of sustainability, it is important to point out the role of AlCl3·6H2O in contrast to H2SO4, thus mitigating detrimental substances. This study provides an important management of agricultural waste through sustainable practises for the development of potential bio-based chemicals, aligning with Green Chemistry and process intensification principles.

Analysis of the airflow features and ventilation efficiency of an Ultra-Clean-Air operating theatre by qDNS simulations and experimental validation.

Ultra-Clean-Air (UCA) operating theatres aim to minimise surgical instrument contamination and wound infection through high flow rates of ultra-clean air, reducing the presence of Microbe Carrying Particles (MCPs). This study investigates the airflow patterns and ventilation characteristics of a UCA operating theatre (OT) under standard ventilation system operating conditions, considering both empty and partially occupied scenarios. Utilising a precise computational model, quasi-Direct Numerical Simulations (qDNS) were conducted to delineate flow velocity profiles, energy spectra, distributions of turbulent kinetic energy, energy dissipation rate, local Kolmogorov scales, and pressure-based coherent structures. These results were also complemented by a tracer gas decay analysis following ASHRAE standard guidelines. Simulations showed that contrary to the intended laminar regime, the OT's geometry inherently fosters a predominantly turbulent airflow, sustained until evacuation through the exhaust vents, and facilitating recirculation zones irrespective of occupancy level. Notably, the occupied scenario demonstrated superior ventilation efficiency, a phenomenon attributed to enhanced kinetic energy induced by the additional obstructions. The findings underscore the critical role of UCA-OT design in mitigating MCP dissemination, highlighting the potential to augment the design to optimise airflow across a broader theatre spectrum, thereby diminishing recirculation zones and consequently reducing the propensity for Surgical Site Infections (SSIs). The study advocates for design refinements to harness the turbulent dynamics beneficially, steering towards a safer surgical environment.

Sustainable proteins from wine industrial by-product: Ultrasound-assisted extraction, fractionation, and characterization.

Plant proteins are increasingly being used in the food industry due to their sustainability. They can be isolated from food industry waste and converted into value-added ingredients, promoting a more circular economy. In this study, ultrasound-assisted alkaline extraction (UAAE) was optimized to maximize the extraction yield and purity of protein ingredients from grapeseeds. Grapeseed protein was extracted using UAAE under different pH (9-11), temperature (20-50 °C), sonication time (15-45 min), and solid/solvent ratio (10-20 mL/g) conditions. The structural and functional attributes of grapeseed protein and its major fractions (albumins and glutelins) were investigated and compared. The albumin fractions had higher solubilities, emulsifying properties, and in vitro digestibilities but lower fluid binding capacities and thermal stability than the UAAE and glutelin fraction. These findings have the potential to boost our understanding of the structural and functional characteristics of grapeseed proteins, thereby increasing their potential applications in the food and other industries.

Clove Essential Oil: Chemical Profile, Biological Activities, Encapsulation Strategies, and Food Applications.

Plants have proven to be important sources for discovering new compounds that are useful in the treatment of various diseases due to their phytoconstituents. Clove (Syzygium aromaticum L.), an aromatic plant widely cultivated around the world, has been traditionally used for food preservation and medicinal purposes. In particular, clove essential oil (CEO) has attracted attention for containing various bioactive compounds, such as phenolics (eugenol and eugenol acetate), terpenes (ß-caryophyllene and α-humulene), and hydrocarbons. These constituents have found applications in cosmetics, food, and medicine industries due to their bioactivity. Pharmacologically, CEO has been tested against a variety of parasites and pathogenic microorganisms, demonstrating antibacterial and antifungal properties. Additionally, many studies have also demonstrated the analgesic, antioxidant, anticancer, antiseptic, and anti-inflammatory effects of this essential oil. However, CEO could degrade for different reasons, impacting its quality and bioactivity. To address this challenge, encapsulation is viewed as a promising strategy that could prolong the shelf life of CEO, improving its physicochemical stability and application in various areas. This review examines the phytochemical composition and biological activities of CEO and its constituents, as well as extraction methods to obtain it. Moreover, encapsulation strategies for CEO and numerous applications in different food fields are also highlighted.

An Overview on Flavor Extraction, Antimicrobial and Antioxidant Significance, and Production of Herbal Wines.

Wine has been utilized as a source for medicinal preparations, combined with various herbs, to treat particular ailments and disorders. By utilizing herb extracts, regular but limited consumption of these herbal wines helps to decrease the need for prescription medications to treat a variety of ailments. The diversity and the composition of the yeast micropopulation significantly contribute to the sensory characteristics of wine. A particular metabolic activity characterizes the growth of each wine yeast species, which determines the concentrations of flavor compounds in the final wine. Numerous herbs, such as tulsi, ginger, aloe vera, tea, amla, lemongrass, and peppermint, are used in the preparation of herbal wines, where either the herb or herbal blends are primarily used as the substrate. The variants provided improved accuracy, increased acceptability, and broader uses for the novel product. Herbal wines pave the way to provide nutraceuticals to consumers and protection against pathogenic microorganisms and inflammation through their richness in antioxidants. The existing herbal wines and their health advantages are discussed in this Review, along with some new directions for the herbal wine business.

Automatic detection of cell-cycle stages using recurrent neural networks.

Mitosis is the process by which eukaryotic cells divide to produce two similar daughter cells with identical genetic material. Research into the process of mitosis is therefore of critical importance both for the basic understanding of cell biology and for the clinical approach to manifold pathologies resulting from its malfunctioning, including cancer. In this paper, we propose an approach to study mitotic progression automatically using deep learning. We used neural networks to predict different mitosis stages. We extracted video sequences of cells undergoing division and trained a Recurrent Neural Network (RNN) to extract image features. The use of RNN enabled better extraction of features. The RNN-based approach gave better performance compared to classifier based feature extraction methods which do not use time information. Evaluation of precision, recall, and F-score indicates the superiority of the proposed model compared to the baseline. To study the loss in performance due to confusion between adjacent classes, we plotted the confusion matrix as well. In addition, we visualized the feature space to understand why RNNs are better at classifying the mitosis stages than other classifier models, which indicated the formation of strong clusters for the different classes, clearly confirming the advantage of the proposed RNN-based approach.

Early Versus Delayed Definitive Fixation Relative to Fasciotomy Closure in High-Energy Tibial Plateau Fractures With Compartment Syndrome.

OBJECTIVES: To evaluate the timing of definitive fixation of tibial plateau fractures relative to fasciotomy closure with regard to alignment and articular reduction. DESIGN: Retrospective case series. SETTING: Four Level I trauma centers. PATIENT SELECTION CRITERIA: Patients with tibial plateau fractures (TPF) with ipsilateral compartment syndrome treated with fasciotomy between 2006 and 2018 met inclusion criteria. Open fractures, patients younger than 18 years, patients with missed or delayed treatment of compartment syndrome, patients with a diagnosis of compartment syndrome after surgical fixation, and patients whose plateau fracture was not treated with open reduction and internal fixation were excluded. Patients were divided into 2 groups depending on the relative timing of fixation to fasciotomy closure: early fixation (EF) was defined as fixation before or at the time of fasciotomy closure, and delayed fixation (DF) was defined as fixation after fasciotomy closure. OUTCOME MEASURES AND COMPARISONS: Radiographic limb alignment (categorized as anatomic alignment (no varus/valgus), ≤5 degrees varus/valgus, or >5 degrees varus/valgus) and articular reduction (categorized as anatomic alignment with no residual gap or step-off, <2 mm, 2-5 mm, and >5 mm of articular surface step-off) were compared between early and delayed fixation groups. In addition, superficial and deep infection rates were compared between those in the EF and DF cohorts. Subgroup analysis within the EF cohort was performed to compare baseline characteristics and outcomes between those that received fixation before closure and those that underwent concurrent fixation and closure within one operative episode. RESULTS: A total of 131 patients met inclusion criteria for this study. Sixty-four patients (48.9%) were stratified into the delayed fixation group, and 67 patients (51.1%) were stratified into the early fixation group. In the EF cohort, 57 (85.1%) were male patients with an average age of 45.3 ± 13.6 years and an average body mass index of 31.0 ± 5.9. The DF cohort comprised primarily male patients (44, 68.8%), with an average age of 46.6 ± 13.9 years and an average body mass index of 28.4 ± 7.9. Fracture pattern distribution did not differ significantly between the early and delayed fixation cohorts ( P = 0.754 for Schatzker classification and P = 0.569 for OTA/AO classification). The relative risk of infection for the DF cohort was 2.17 (95% confidence interval, 1.04-4.54) compared with the EF cohort. Patients in the early fixation cohort were significantly more likely to have anatomic articular reduction compared with their delayed fixation counterparts (37.5% vs. 52.2%; P < 0.001). CONCLUSIONS: This study demonstrated higher rates of anatomic articular reduction in patients who underwent fixation of tibial plateau fractures before or at the time of fasciotomy closure for acute compartment syndrome compared with their counterparts who underwent definitive fixation for tibial plateau fracture after fasciotomy closure. The relative risk of overall infection for those who underwent fasciotomy closure after definitive fixation for tibial plateau fracture was 2.17 compared with the cohort that underwent closure before or concomitantly with definitive fixation. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Calreticulin and JAK2V617F driver mutations induce distinct mitotic defects in myeloproliferative neoplasms.

Myeloproliferative neoplasms (MPNs) encompass a diverse group of hematologic disorders driven by mutations in JAK2, CALR, or MPL. The prevailing working model explaining how these driver mutations induce different disease phenotypes is based on the decisive influence of the cellular microenvironment and the acquisition of additional mutations. Here, we report increased levels of chromatin segregation errors in hematopoietic cells stably expressing CALRdel52 or JAK2V617F mutations. Our investigations employing murine 32DMPL and human erythroleukemic TF-1MPL cells demonstrate a link between CALRdel52 or JAK2V617F expression and a compromised spindle assembly checkpoint (SAC), a phenomenon contributing to error-prone mitosis. This defective SAC is associated with imbalances in the recruitment of SAC factors to mitotic kinetochores upon CALRdel52 or JAK2V617F expression. We show that JAK2 mutant CD34 + MPN patient-derived cells exhibit reduced expression of the master mitotic regulators PLK1, aurora kinase B, and PP2A catalytic subunit. Furthermore, the expression profile of mitotic regulators in CD34 + patient-derived cells allows to faithfully distinguish patients from healthy controls, as well as to differentiate primary and secondary myelofibrosis from essential thrombocythemia and polycythemia vera. Altogether, our data suggest alterations in mitotic regulation as a potential driver in the pathogenesis in MPN.

Plant-based proteins from agro-industrial waste and by-products: Towards a more circular economy.

There is a pressing need for affordable, abundant, and sustainable sources of proteins to address the rising nutrient demands of a growing global population. The food and agriculture sectors produce significant quantities of waste and by-products during the growing, harvesting, storing, transporting, and processing of raw materials. These waste and by-products can sometimes be converted into valuable protein-rich ingredients with excellent functional and nutritional attributes, thereby contributing to a more circular economy. This review critically assesses the potential for agro-industrial wastes and by-products to contribute to global protein requirements. Initially, we discuss the origins and molecular characteristics of plant proteins derived from agro-industrial waste and by-products. We then discuss the techno-functional attributes, extraction methods, and modification techniques that are applied to these plant proteins. Finally, challenges linked to the safety, allergenicity, anti-nutritional factors, digestibility, and sensory attributes of plant proteins derived from these sources are highlighted. The utilization of agro-industrial by-products and wastes as an economical, abundant, and sustainable protein source could contribute towards achieving the Sustainable Development Agenda's 2030 goal of a "zero hunger world", as well as mitigating fluctuations in food availability and prices, which have detrimental impacts on global food security and nutrition.

Ventriculo-atrial shunt with occlusion of the internal jugular vein: operative experience and surgical technique.

BACKGROUND: Ventricular shunts are one of the most frequent techniques used for the management of hydrocephalus. The ventriculoperitoneal shunt (VPS) is the most commonly performed procedure, and the ventriculoatrial shunt (VAS) is the second option in most medical centers. The main objective of this study is to introduce and describe a surgical approach for VAS outlining our experience and comparing it with traditional shunting techniques. METHODS: In this retrospective cohort comparison study, we included patients with hydrocephalus treated with a surgical procedure between January 2010 and February 2021 at a single academic institution. We categorized the procedures into two groups: patients with VPS and conventional VAS grouped together into the conventional technique (CT) group, and the second group was patients with whom we performed VAS with complete internal jugular vein occlusion (IJVOT). We compared the surgical time, postoperative complications, and occurrence of shunt failure among the groups by performing univariate analysis using the Fisher exact test. RESULTS: Out of the 106 patients included in the analysis, IJVOT was performed in 66 patients, and CT in 40 patients. The median surgical time was 60 min (IQR 60-90) for IJVOT versus 100 min (IQR 60-120) for CT (p < 0.01). In the follow-up a month after the procedure, 83.3% of patients with IJVOT and 62.5% of patients with CT did not require shunt removal or shunt revision (p < 0.01). Shunt revision rates were 12.5% and 1.5% for CT while 1.5% and 2.5% for IJVOT at 1 and 6 months after the procedure. CONCLUSION: Our findings demonstrate that VAS with IJVOT is a safe method that exhibited shorter surgical times and outcomes comparable to CT. However, since the present study represents the first cohort evaluating IJVOT, it is imperative to conduct larger prospective studies, along with clinical trials, to fully explore and establish efficacy, long-term outcomes, and an in-depth comparison among shunting techniques.

Olive leaf protein: Extraction optimization, in vitro digestibility, structural and techno-functional properties.

Olive leaf, as an important by-product of olive farming, is generated from the pruning and harvesting of olive trees and represents >10 % of the total olive weight. The present study was conducted to evaluate the composition, functional and structural characterizations, as well as the in vitro digestibility of olive leaf proteins isolated from ultrasonic-assisted extraction, comparing to classical and industrial techniques. The ultrasound-assisted extraction of olive leaf protein was optimized by the simultaneous maximization of the yield and purity of protein using a Box-Behnken design (BBD) of response surface methodology (RSM). The results indicated that the optimal extraction conditions were as follows: pH of 10.99, temperature of 40.48 °C, sonication time of 47.25 min, and solvent/solid ratio of 24.08 mL/g. Under these conditions, the extraction yield and protein content were 11.67 and 51.2 %, respectively, which were significantly higher than those obtained by the conventional techniques. Regarding the functionality of protein, extraction technique had significant impacts on the structural and functional properties of proteins. In general, ultrasound assisted extraction had higher solubility, and better foaming and thermal properties and in vitro digestibility but lower emulsifying stability and fluid binding capacity compared to conventional ones. Ultrasound-assisted alkaline extraction has great potential to produce edible olive leaf protein with modified functional properties that can be used for various aims in the food applications.

Niveles de referencia diagnósticos en equipos de radiografía dental en Bogotá, Colombia

Introducción: Las radiografías dentales son una de las exposiciones médicas más frecuentes a la radiación ionizante. El uso de radiación ionizante está asociado a un riesgo probable de desencadenar efectos biológicos adversos y posibles daños a la salud del paciente. Para evitar que los pacientes reciban dosis innecesariamente altas durante estas exposiciones, la Comisión Internacional de Protección Radiológica recomienda la utilización de los niveles de referencia para diagnóstico, como una herramienta efectiva de ayuda a la optimización de la protección radiológica de los pacientes. Objetivo: Estimar los niveles de referencia para diagnóstico en radiografía dental intraoral y panorámica en la ciudad de Bogotá, D. C. Metodología: Se evaluaron los parámetros de exposición radiográficos de los equipos y la calidad de imagen en 68 equipos de radiografía dental periapical y 23 equipos de radiografía panorámica. Se estimaron las magnitudes dosimétricas de kerma incidente en aire (Kai) en equipos intraorales para la radiografía de un maxilar molar de un adulto y el producto kerma aire-área (PKA) en equipos de radiografía panorámica en un examen de un adulto estándar. Resultados: El tercer cuartil de la distribución de kerma incidente en aire para radiografía intraoral fue de 3,3 mGy y del producto kerma aire-área para radiografía panorámica fue de 103,9 mGycm2. En la distribución de frecuencias de kerma incidente en aire para radiografía intraoral, el porcentaje más alto de equipos estuvo en el rango de 2,0-3,0 mGy. En la distribución de frecuencias del producto kerma aire-área para los equipos de radiografía panorámica, el porcentaje más alto de equipos estuvo en el rango de 60 a 80 mGycm2. Discusión: Las instituciones consideradas para establecer los Niveles de Referencia para Diagnóstico en este estudio contaron con una adecuada calidad de la imagen evaluada con un maniquí dental, pero las variaciones en las dosis de radiación entre instituciones señalan la necesidad de implementar herramientas que contribuyan a la optimización de las prácticas. Conclusiones: Se recomienda usar los valores de los niveles de referencia para diagnóstico encontrados en esta investigación para optimizar la protección radiológica en las exposiciones radiológicas dentales, y se espera que este estudio sirva de base para nuevas investigaciones en las demás ciudades del país.

Introduction: Dental X-rays are one of the most frequent medical exposures to ionizing radiation. The use of ionizing radiation is associated with a probable risk of triggering adverse biological effects and possible damage to the patient's health. To prevent patients from receiving unnecessarily high doses during these exposures, the International Commission on Radiological Protection recommends the use of diagnostic reference levels as an effective tool to help optimize radiological protection for patients. Objective: To estimate diagnostic reference levels in intraoral and panoramic dental radiography in the city of Bogotá, D.C. Methodology: In 68 periapical dental radiography equipment and 23 panoramic radiography equipment, the radiographic exposure parameters of the equipment and image quality were evaluated. The dosimetric magnitudes of incident air kerma (Ka,i) in intraoral equipment for the radiography of a maxillary molar of an adult and the air kerma-area product (PKA) in panoramic radiography equipment in a standard adult examination were estimated. Results: The third quartile of the incident air kerma distribution for intraoral radiography was 3,3 mGy and the air kerma-area product for panoramic radiography was 103,9 mGycm2. In the frequency distribution of incident air kerma for intraoral radiography, the highest percentage of equipment was in the range of 2,0-3,0 mGy, and in the frequency distribution of the air kerma-area product for equipment of panoramic radiography, the highest percentage of the equipment was in the range of 60 to 80 mGy cm2. Discussion: The institutions considered to establish the diagnostic reference levels in this study had an adequate quality of the image evaluated with a dental phantom, but the variations in radiation doses between institutions indicate the need to implement tools that contribute to the optimization of the practices. Conclusions: It is recommended to use the values of the diagnostic reference levels found in this research to optimize radiological protection in dental radiological exposures, and it is expected that this study will serve as a basis for further research in other cities of the country.

Cereal bran proteins: recent advances in extraction, properties, and applications.

The projected global population is expected to reach around 9.7 billion by 2050, indicating a greater demand for proteins in the human diet. Cereal bran proteins (CBPs) have been identified as high-quality proteins, with potential applications in both the food and pharmaceutical industries. In 2020, global cereal grain production was 2.1 billion metric tonnes, including wheat, rice, corn, millet, barley, and oats. Cereal bran, obtained through milling, made up 10-20% of total cereal grain production, varying by grain type and milling degree. In this article, the molecular composition and nutritional value of CBPs are summarized, and recent advances in their extraction and purification are discussed. The functional properties of CBPs are then reviewed, including their solubility, binding, emulsifying, foaming, gelling, and thermal properties. Finally, current challenges to the application of CBPs in foods are highlighted, such as the presence of antinutritional factors, low digestibility, and allergenicity, as well as potential strategies to improve the nutritional and functional properties by overcoming these challenges. CBPs exhibit nutritional and functional attributes that are similar to those of other widely used plant-based protein sources. Thus, CBPs have considerable potential for use as ingredients in food, pharmaceutical, and other products.

Bacteria-instructed B cells cross-prime naïve CD8+ T cells triggering effective cytotoxic responses.

In addition to triggering humoral responses, conventional B cells have been described in vitro to cross-present exogenous antigens activating naïve CD8+ T cells. Nevertheless, the way B cells capture these exogenous antigens and the physiological roles of B cell-mediated cross-presentation remain poorly explored. Here, we show that B cells capture bacteria by trans-phagocytosis from previously infected dendritic cells (DC) when they are in close contact. Bacterial encounter "instructs" the B cells to acquire antigen cross-presentation abilities, in a process that involves autophagy. Bacteria-instructed B cells, henceforth referred to as BacB cells, rapidly degrade phagocytosed bacteria, process bacterial antigens and cross-prime naïve CD8+ T cells which differentiate into specific cytotoxic cells that efficiently control bacterial infections. Moreover, a proof-of-concept experiment shows that BacB cells that have captured bacteria expressing tumor antigens could be useful as novel cellular immunotherapies against cancer.

Biallelic variants in CRIPT cause a Rothmund-Thomson-like syndrome with increased cellular senescence.

PURPOSE: Rothmund-Thomson syndrome (RTS) is characterized by poikiloderma, sparse hair, small stature, skeletal defects, cancer, and cataracts, resembling features of premature aging. RECQL4 and ANAPC1 are the 2 known disease genes associated with RTS in >70% of cases. We describe RTS-like features in 5 individuals with biallelic variants in CRIPT (OMIM 615789). METHODS: Two newly identified and 4 published individuals with CRIPT variants were systematically compared with those with RTS using clinical data, computational analysis of photographs, histologic analysis of skin, and cellular studies on fibroblasts. RESULTS: All CRIPT individuals fulfilled the diagnostic criteria for RTS and additionally had neurodevelopmental delay and seizures. Using computational gestalt analysis, CRIPT individuals showed greatest facial similarity with individuals with RTS. Skin biopsies revealed a high expression of senescence markers (p53/p16/p21) and the senescence-associated ß-galactosidase activity was elevated in CRIPT-deficient fibroblasts. RECQL4- and CRIPT-deficient fibroblasts showed an unremarkable mitotic progression and unremarkable number of mitotic errors and no or only mild sensitivity to genotoxic stress by ionizing radiation, mitomycin C, hydroxyurea, etoposide, and potassium bromate. CONCLUSION: CRIPT causes an RTS-like syndrome associated with neurodevelopmental delay and epilepsy. At the cellular level, RECQL4- and CRIPT-deficient cells display increased senescence, suggesting shared molecular mechanisms leading to the clinical phenotypes.

Use of Computed Tomography Angiography to Predict Complications in Tibia Fractures: A Multicenter Retrospective Analysis.

OBJECTIVES: To assess the ability of computed tomography angiography identified infrapopliteal vascular injury to predict complications in tibia fractures that do not require vascular surgical intervention. DESIGN: Multicenter retrospective review. SETTING: Six Level I trauma centers. PATIENTS AND INTERVENTION: Two hundred seventy-four patients with tibia fractures (OTA/AO 42 or 43) who underwent computed tomography angiography maintained a clinically perfused foot not requiring vascular surgical intervention and were treated with an intramedullary nail. Patients were grouped by the number of vessels below the trifurcation that were injured. MAIN OUTCOME MEASUREMENTS: Rates of superficial and deep infection, amputation, unplanned reoperation to promote bone healing (nonunion), and any unplanned reoperation. RESULTS: There were 142 fractures in the control (no-injury) group, 87 in the one-vessel injury group, and 45 in the two-vessel injury group. Average follow-up was 2 years. Significantly higher rates of nerve injury and flap coverage after wound breakdown were observed in the two-vessel injury group. The two-vessel injury group had higher rates of deep infection (35.6% vs. 16.9%, P = 0.030) and unplanned reoperation to promote bone healing (44.4% vs. 23.9%, P = 0.019) compared with controls, as well as increased rates of any unplanned reoperation compared with control and one-vessel injury groups (71.1% vs. 39.4% and 51.7%, P < 0.001), respectively. There were no significant differences in rates of superficial infection or amputation. CONCLUSIONS: Tibia fractures with two-vessel injuries were associated with higher rates of deep infection and unplanned reoperation to promote bone healing compared with those without vascular injury, as well as increased rates of any unplanned reoperation compared with controls and fractures with one-vessel injury. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Process Parameter Prediction for Fused Deposition Modeling Using Invertible Neural Networks.

Additive manufacturing has revolutionized prototyping and small-scale production in the past years. By creating parts layer by layer, a tool-less production technology is established, which allows for rapid adaption of the manufacturing process and customization of the product. However, the geometric freedom of the technologies comes with a large number of process parameters, especially in Fused Deposition Modeling (FDM), all of which influence the resulting part's properties. Since those parameters show interdependencies and non-linearities, choosing a suitable set to create the desired part properties is not trivial. This study demonstrates the use of Invertible Neural Networks (INN) for generating process parameters objectively. By specifying the desired part in the categories of mechanical properties, optical properties and manufacturing time, the demonstrated INN generates process parameters capable of closely replicating the desired part. Validation trials prove the precision of the solution with measured properties achieving the desired properties to up to 99.96% and a mean accuracy of 85.34%.

Evaluation of algaecide effectiveness of five different oxidants applied on harmful phytoplankton.

Harmful algal blooms (HABs) in coastal areas similarly impact both ecosystems and human health. The translocation of phytoplankton species via maritime transport can potentially promote the growth of HABs in coastal systems. Accordingly, ballast water must be disinfected. The main goal of this study is to assess the effectiveness of different emerging biocides, including H2O2, peracetic acid (PAA), peroxymonosulfate (PMS), and peroxydisulfate (PDS). The effectiveness of these biocides is compared with that of conventional chlorination methods. Their effects on two ichthyotoxic microalgae with worldwide distribution, i.e., Prymnesium parvum and Heterosigma akashiwo, are examined. To ensure the prolonged effectiveness of the different reagents, their concentration-response curves for 14 days are constructed and examined. The results suggest a strong but shorter effect by PMS (EC50 = 0.40-1.99 mg·L-1) and PAA (EC50 = 0.32-2.70 mg·L-1), a maintained effect by H2O2 (EC50 = 6.67-7.08 mg·L-1), and a negligible effect by PDS. H. akashiwo indicates higher resistance than P. parvum, except when H2O2 is used. Based on the growth inhibition performance and consumption of the reagents as well as a review of important aspects regarding their application, using H2O2, PAA, or PMS can be a feasible alternative to chlorine-based reagents for inhibiting the growth of harmful phytoplankton.

Microwave radiation-assisted synthesis of levulinic acid from microcrystalline cellulose: Application to a melon rind residue.

The circular economy considers waste to be a new raw material for the development of value-added products. In this context, agroindustrial lignocellulosic waste represents an outstanding source of new materials and platform chemicals, such as levulinic acid (LA). Herein we study the microwave (MW)-assisted acidic conversion of microcrystalline cellulose (MCC) into LA. The influence of acidic catalysts, inorganic salt addition and ball-milling pre-treatment of MCC on LA yield was assessed. Depolymerization and disruption of cellulose was monitored by FTIR, TGA and SEM, whereas the products formed were analyzed by HPLC and NMR spectroscopy. The parameters that afforded the highest LA yield (48 %, 100 % selectivity) were: ball-milling pre-treatment of MCC for 16 min at 600 rpm, followed by MW-assisted thermochemical treatment for 20 min at 190 °C, aqueous p-toluenesulfonic acid (p-TSA) 0.25 M as catalyst and saturation with KBr. These optimal conditions were further applied to a lignocellulosic feedstock, namely melon rind, to afford a 51 % yield of LA. These results corroborate the suitability of this method to obtain LA from agroindustrial wastes, in line with a circular economy-based approach.

Inactivation of the waterborne marine pathogen Vibrio alginolyticus by photo-chemical processes driven by UV-A, UV-B, or UV-C LED combined with H2O2 or HSO5.

Ultraviolet (UV) radiation is a well-implemented process for water disinfection. The development of emergent UV sources, such as light-emitting diodes (LEDs), has afforded new possibilities for advanced oxidation processes. The emission wavelength is considered to be an important factor for photo-chemical processes in terms of both biological damage and energetic efficiency, as the inactivation mechanisms and mode-of-action may differ according to the wavelength that is applied. In addition, these processes merit exploration for inactivating emerging pathogens, such as marine vibrios, that are important bacteria to control in maritime activities. The main goal of this study was to compare the disinfection efficacy of several UV-LED driven processes with different modes of action. First, the effect of UV-LEDs was assessed at different UV ranges (UV-A, UV-B, or UV-C). Second, the possible enhancement of a combination with hydrogen peroxide (H2O2) or peroxymonosulfate salt (HSO5-) was investigated under two different application strategies, i.e. simultaneous or sequential. The results obtained indicate a high sensitivity of Vibrio alginolyticus to UV radiation, especially under UV-B (kobs = 0.24 cm2/mJ) and UV-C (kobs = 1.47 cm2/mJ) irradiation. The highest inactivation rate constants were obtained for UV/HSO5- (kobs (cm2/mJ)=0.0007 (UV-A); 0.39 (UV-B); 1.79 (UV-C)) with respect to UV/H2O2 (kobs (cm2/mJ)=0.0006 (UV-A); 0.26 (UV-B); and 1.54 (UV-C)) processes, however, regrowth was avoided only with UV/H2O2. Additionally, the disinfection enhancement caused by a chemical addition was more evident in the order UV-A > UV-B > UV-C. By applying H2O2 (10 mg/L) or HSO5- (2.5 mg/L) in a sequential mode before the UV, negligible effects were obtained in comparison with the simultaneous application. Finally, promising electrical energy per order (EEO) values were obtained as follows: UV/HSO5- (EEO (kWh/m3)=1.68 (UV-A); 0.20 (UV-B); 0.04 (UV-C)) and UV/H2O2 (EEO (kWh/m3)=2.15 (UV-A); 0.32 (UV-B); 0.04 (UV-C)), demonstrating the potential of UV-LEDs for disinfection in particular activities such as the aquaculture industry or maritime transport.