Chitosan as capping agent in a robust one-pot procedure for a magnetic catalyst synthesis.

Here, we report a one-pot solvothermal method for the development of magnetically recoverable catalysts with Ru or Ag nanoparticles (NPs) capped by chitosan (CS), a derivative of natural chitin. The formation of iron oxide NPs was carried out in situ in the presence of CS and iron acetylacetonate in boiling triethyleneglycol (TEG) due to CS solubilization in warm TEG. Coordination with Ru or Ag species and the NP formation take place in the same reaction solution, eliminating intermediate steps. In optimal conditions the method developed allows stabilization of 2.2 nm monodisperse Ru NPs (containing both Ru0 and Ru4+ species) that are evenly distributed through the catalyst, while for Ag NPs, this stabilizing medium is inferior, leading to exceptionally large Ag nanocrystals. Catalytic testing of CS-Ru magnetically recoverable catalysts in the reduction of 4-nitrophenol to 4-aminophenol with excess NaBH4 revealed that the catalyst with 2.2 nm Ru NPs exhibits the highest catalytic activity compared to samples with larger Ru NPs (2.9-3.2 nm). Moreover, this catalyst displayed extraordinary shelf-life in the aqueous solution (up to ten months) and excellent reusability in ten consecutive reactions with easy magnetic separation at each step which were assigned to its conformational rigidity at a constant pH. These characteristics as well as favorable environmental factors of the catalyst fabrication, make it promising for nitroarene reduction.

Glucose Oxidase Immobilized on Magnetic Zirconia: Controlling Catalytic Performance and Stability.

Here, we report the structures and properties of biocatalysts based on glucose oxidase (GOx) macromolecules immobilized on the mesoporous zirconia surface with or without magnetic iron oxide nanoparticles (IONPs) in zirconia pores. Properties of these biocatalysts were studied in oxidation of d-glucose to d-gluconic acid at a wide range of pH and temperatures. We demonstrate that the calcination temperature (300, 400, or 600 °C) of zirconia determines its structure, with crystalline materials obtained at 400 and 600 °C. This, in turn, influences the catalytic behavior of immobilized GOx, which was tentatively assigned to the preservation of GOx conformation on the crystalline support surface. IONPs significantly enhance the biocatalyst activity due to synergy with the enzyme. At the same time, neither support porosity nor acidity/basicity shows correlations with the properties of this biocatalyst. The highest relative activity of 98% (of native GOx) at a pH 6-7 and temperature of 40-45 °C was achieved for the biocatalyst based on ZrO2 calcined at 600 °C and containing IONPs. This process is green as it is characterized by a high atom economy due to the formation of a single product with high selectivity and conversion and minimization of waste due to magnetic separation of the catalyst from an aqueous solution. These and an exceptional stability of this catalyst in 10 consecutive reactions (7% relative activity loss) make it favorable for practical applications.

Pd Catalyst Based on Hyperbranched Polypyridylphenylene Formed In Situ on Magnetic Silica Allows for Excellent Performance in Suzuki-Miyaura Reaction.

Here, for the first time, we developed a catalytic composite by forming a thin layer of a cross-linked hyperbranched pyridylphenylene polymer (PPP) on the surface of mesoporous magnetic silica (Fe3O4-SiO2, MS) followed by complexation with Pd species. The interaction of Pd acetate (PdAc) with pyridine units of the polymer results in the formation of Pd2+ complexes which are evenly distributed through the PPP layer. The MS-PPP-PdAc catalyst was tested in the Suzuki-Miyaura cross-coupling reaction with four different para-Br-substituted arenes, demonstrating enhanced catalytic properties for substrates containing electron withdrawing groups, and especially, for 4-bromobenzaldehyde. In this case, 100% selectivity and conversion were achieved with TOF of >23 000 h-1 at a very low Pd loading (0.032 mol %), a remarkable performance in this reaction. We believe these exceptional catalytic properties are due to the hyperbranched polymer architecture, which allows excellent stabilization of catalytic species as well as a favorable space for reacting molecules. Additionally, the magnetic character of the support allows for easy magnetic separation during the catalyst synthesis, purification, and reuse, resulting in energy and materials savings. These factors and excellent reusability of MS-PPP-PdAc in five consecutive uses make this catalyst promising for a variety of catalytic reactions.

Au-Cu@PANI Alloy Core Shells for Aerobic Fibrin Degradation under Visible Light Exposure.

Fibrin plays a critical role in wound healing and hemostasis, yet it is also the main case of cardiovascular diseases and thrombosis. Here, we show the unique design of Au-Cu@PANI alloy core-shell rods for fibrin clot degradation. Microscopic (transmission electron microscopy (TEM), scanning transmission electron microscopy-energy-dispersive X-ray (STEM-EDX)) and structural characterizations (powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS)) of the Au-Cu@PANI hybrid material reveal the formation of Au-Cu heterogeneous alloy core rods (aspect ratio = 3.7) with thin Cu2O and PANI shells that create a positive surface charge (ζ-potential = +22 mV). This architecture is supported by the survey XPS spectrum showing the presence of Cu 2p, N 1s, and C 1s features with binding energies of 934.8, 399.7, and 284.8 eV, respectively. Upon photolysis (λ ≥ 495 or 590 nm), these hybrid composite nanorods provide sufficient excited-state redox potential to generate reactive oxygen species (ROS) for degradation of model fibrin clots within 5-7 h. Detailed scanning electron microscopy (SEM) analysis of the fibrin network shows significant morphology modification including formation of large voids and strand termini, indicating degradation of fibrin protofibril by Au-Cu@PANI. The dye 1,3-diphenylisobenzofuran (DPBF) used to detect the presence of 1O2 shows a 27% bleaching of the absorption at λ = 418 nm within 75 min of irradiation of an aqueous Au-Cu@PANI solution in air. Moreover, electron paramagnetic resonance (EPR) spin-trapping experiments reveal a hyperfine-coupled triplet signature at room temperature with intensities 1:1:1: and g-value = 2.0057, characteristic of the reaction between the spin probe 4-Oxo-TEMP and 1O2 during irradiation. Controlled 1O2 scavenging experiments by NaN3 show 82% reduction in the spin-trapped EPR signal area. Both DPBF bleaching and EPR spin trapping indicate that in situ generated 1O2 is responsible for fibrin strand scission. This unique nanomaterial function via use of ubiquitous oxygen as a reagent could open creative avenues for future in vivo biomedical applications to treat fibrin clot diseases.

3D Ultrastructure of the Cochlear Outer Hair Cell Lateral Wall Revealed By Electron Tomography.

Outer Hair Cells (OHCs) in the mammalian cochlea display a unique type of voltage-induced mechanical movement termed electromotility, which amplifies auditory signals and contributes to the sensitivity and frequency selectivity of mammalian hearing. Electromotility occurs in the OHC lateral wall, but it is not fully understood how the supramolecular architecture of the lateral wall enables this unique form of cellular motility. Employing electron tomography of high-pressure frozen and freeze-substituted OHCs, we visualized the 3D structure and organization of the membrane and cytoskeletal components of the OHC lateral wall. The subsurface cisterna (SSC) is a highly prominent feature, and we report that the SSC membranes and lumen possess hexagonally ordered arrays of particles. We also find the SSC is tightly connected to adjacent actin filaments by short filamentous protein connections. Pillar proteins that join the plasma membrane to the cytoskeleton appear as variable structures considerably thinner than actin filaments and significantly more flexible than actin-SSC links. The structurally rich organization and rigidity of the SSC coupled with apparently weaker mechanical connections between the plasma membrane (PM) and cytoskeleton reveal that the membrane-cytoskeletal architecture of the OHC lateral wall is more complex than previously appreciated. These observations are important for our understanding of OHC mechanics and need to be considered in computational models of OHC electromotility that incorporate subcellular features.

Graphene Derivative in Magnetically Recoverable Catalyst Determines Catalytic Properties in Transfer Hydrogenation of Nitroarenes to Anilines with 2-Propanol.

Here, we report transfer hydrogenation of nitroarenes to aminoarenes using 2-propanol as a hydrogen source and Ag-containing magnetically recoverable catalysts based on partially reduced graphene oxide (pRGO) sheets. X-ray diffraction and X-ray photoelectron spectroscopy data demonstrated that, during the one-pot catalyst synthesis, formation of magnetite nanoparticles (NPs) is accompanied by the reduction of graphene oxide (GO) to pRGO. The formation of Ag0 NPs on top of magnetite nanoparticles does not change the pRGO structure. At the same time, the catalyst structure is further modified during the transfer hydrogenation, leading to a noticeable increase of sp2 carbons. These carbons are responsible for the adsorption of substrate and intermediates, facilitating a hydrogen transfer from Ag NPs and creating synergy between the components of the catalyst. The nitroarenes with electron withdrawing and electron donating substituents allow for excellent yields of aniline derivatives with high regio and chemoselectivity, indicating that the reaction is not disfavored by these functionalities. The versatility of the catalyst synthetic protocol was demonstrated by a synthesis of an Ru-containing graphene derivative based catalyst, also allowing for efficient transfer hydrogenation. Easy magnetic separation and stable catalyst performance in the transfer hydrogenation make this catalyst promising for future applications.

Facile Synthesis of Magnetically Recoverable Pd and Ru Catalysts for 4-Nitrophenol Reduction: Identifying Key Factors.

This paper reports the development of robust Pd- and Ru-containing magnetically recoverable catalysts in a one-pot procedure using commercially available, branched polyethyleneimine (PEI) as capping and reducing agent. For both catalytic metals, ∼3 nm nanoparticles (NPs) are stabilized in the PEI shell of magnetite NPs, whose aggregation allows for prompt magnetic separation. The catalyst properties were studied in a model reaction of 4-nitrophenol hydrogenation to 4-aminophenol with NaBH4. A similar catalytic NP size allowed us to decouple the NP size impact on the catalytic performance from other parameters and to follow the influence of the catalytic metal type and amount as well as the PEI amount on the catalytic activity. The best catalytic performances, the 1.2 min-1 rate constant and the 433.2 min-1 turnover frequency, are obtained for the Ru-containing catalyst. This is discussed in terms of stability of Ru hydride facilitating the surface-hydrogen transfer and the presence of Ru4+ species on the Ru NP surface facilitating the nitro group adsorption, both leading to an increased catalyst efficiency. High catalytic activity as well as the high stability of the catalyst performance in five consecutive catalytic cycles after magnetic separation makes this catalyst promising for nitroarene hydrogenation reactions.

Zn2+ Ion Surface Enrichment in Doped Iron Oxide Nanoparticles Leads to Charge Carrier Density Enhancement.

Here, we report the development of monodisperse Zn-doped iron oxide nanoparticles (NPs) with different amounts of Zn (Zn x Fe3-x O4, 0 < x < 0.43) by thermal decomposition of a mixture of zinc and iron oleates. The as-synthesized NPs show a considerable fraction of wüstite (FeO) which is transformed to spinel upon 2 h oxidation of the NP reaction solutions. At any Zn doping amounts, we observed the enrichment of the NP surface with Zn2+ ions, which is enhanced at higher Zn loadings. Such a distribution of Zn2+ ions is attributed to the different thermal decomposition profiles of Zn and Fe oleates, with Fe oleate decomposing at much lower temperature than that of Zn oleate. The decomposition of Zn oleate is, in turn, catalyzed by a forming iron oxide phase. The magnetic properties were found to be strongly dependent on the Zn doping amounts, showing the saturation magnetization to decrease by 9 and 20% for x = 0.05 and 0.1, respectively. On the other hand, X-ray photoelectron spectroscopy near the Fermi level demonstrates that the Zn0.05Fe2.95O4 sample displays a more metallic character (a higher charge carrier density) than undoped iron oxide NPs, supporting its use as a spintronic material.

Oriented Attachment Is a Major Control Mechanism To Form Nail-like Mn-Doped ZnO Nanocrystals.

Here, we present a controlled synthesis of Mn-doped ZnO nanoparticles (NPs) with predominantly nail-like shapes, whose formation occurs via tip-to-base-oriented attachment of initially formed nanopyramids, followed by leveling of sharp edges that lead to smooth single-crystalline "nails". This shape is prevalent in noncoordinating solvents such as octadecene and octadecane. Yet, the double bond in the former promotes oriented attachment. By contrast, Mn-doped ZnO NP synthesis in a weakly coordinating solvent, benzyl ether, results in dendritic structures because of random attachment of initial NPs. Mn-doped ZnO NPs possess a hexagonal wurtzite structure, and in the majority of cases, the NP surface is enriched with Mn, indicating a migration of Mn2+ ions to the NP surface during the NP formation. When the NP formation is carried out without the addition of octadecyl alcohol, which serves as a surfactant and a reaction initiator, large, concave pyramid dimers are formed whose attachment takes place via basal planes. UV-vis and photoluminescence spectra of these NPs confirm the utility of controlling the NP shape to tune electro-optical properties.

Metal-Ion Distribution and Oxygen Vacancies That Determine the Activity of Magnetically Recoverable Catalysts in Methanol Synthesis.

Here, we report on the development of novel Zn-, Zn-Cr-, and Zn-Cu-containing catalysts using magnetic silica (Fe3O4-SiO2) as the support. Transmission electron microscopy, powder X-ray diffraction, and X-ray photoelectron spectroscopy (XPS) showed that the iron oxide nanoparticles are located in mesoporous silica pores and the magnetite (spinel) structure remains virtually unchanged despite the incorporation of Zn and Cr. According to XPS data, the Zn and Cr species are intermixed within the magnetite structure. In the case of the Zn-Cu-containing catalysts, a separate Cu2O phase was also observed along with the spinel structure. The catalytic activity of these catalysts was tested in methanol synthesis from syngas (CO + H2). The catalytic experiments showed an improved catalytic performance of Zn- and Zn-Cr-containing magnetic silicas compared to that of the ZnO-SiO2 catalyst. The best catalytic activity was obtained for the Zn-Cr-containing magnetic catalyst prepared with 1 wt % Zn and Cr each. X-ray absorption spectroscopy demonstrated the presence of oxygen vacancies near Fe and Zn in Zn-containing, and even more in Zn-Cr-containing, magnetic silica (including oxygen vacancies near Cr ions), revealing a correlation between the catalytic properties and oxygen vacancies. The easy magnetic recovery, robust synthetic procedure, and high catalytic activity make these catalysts promising for practical applications.

Enhancing the Catalytic Activity of Zn-Containing Magnetic Oxides in a Methanol Synthesis: Identifying the Key Factors.

A new family of Ni-, Co-, and Cr-doped Zn-containing magnetic oxide nanoparticles (NPs) stabilized by polyphenylquinoxaline (PPQ) and hyperbranched pyridylphenylene polymer (PPP) has been developed. These NPs have been synthesized by thermal decomposition of Zn and doping metal acetylacetonates in the reaction solution of preformed magnetite NPs, resulting in single-crystal NPs with spinel structure. For the PPQ-capped NPs, it was demonstrated that all three types of metal species (Fe, Zn, and a doping metal) reside within the same NPs, the surface of which is enriched with Zn and a doping metal, while the deeper layers are enriched with Fe. The Cr-doped NPs at the high Cr loading are an exception due to favored deposition of Cr on magnetite located in the NP depth. The PPP-capped NPs exhibit similar morphology and crystallinity; however, the detailed study of the NP composition was barred due to the high PPP amount retained on the NP surface. The catalyst testing in syngas conversion to methanol demonstrated outstanding catalytic properties of doped Zn-containing magnetic oxides, whose activities are dependent on the doping metal content and on the stabilizing polymer. The PPP stabilization allows for better access to the catalytic species due to the open and rigid polymer architecture and most likely optimized distribution of doping species. Repeat experiments carried out after magnetic separation of catalysts from the reaction mixture showed excellent catalyst stability even after five consecutive catalytic runs.

Ru-Containing Magnetically Recoverable Catalysts: A Sustainable Pathway from Cellulose to Ethylene and Propylene Glycols.

Biomass processing to value-added chemicals and biofuels received considerable attention due to the renewable nature of the precursors. Here, we report the development of Ru-containing magnetically recoverable catalysts for cellulose hydrogenolysis to low alcohols, ethylene glycol (EG) and propylene glycol (PG). The catalysts are synthesized by incorporation of magnetite nanoparticles (NPs) in mesoporous silica pores followed by formation of 2 nm Ru NPs. The latter are obtained by thermal decomposition of ruthenium acetylacetonate in the pores. The catalysts showed excellent activities and selectivities at 100% cellulose conversion, exceeding those for the commercial Ru/C. High selectivities as well as activities are attributed to the influence of Fe3O4 on the Ru(0)/Ru(4+) NPs. A facile synthetic protocol, easy magnetic separation, and stability of the catalyst performance after magnetic recovery make these catalysts promising for industrial applications.

Ring Separation Highlights the Protein-Folding Mechanism Used by the Phage EL-Encoded Chaperonin.

Chaperonins are ubiquitous, ATP-dependent protein-folding molecular machines that are essential for all forms of life. Bacteriophage φEL encodes its own chaperonin to presumably fold exceedingly large viral proteins via profoundly different nucleotide-binding conformations. Our structural investigations indicate that ATP likely binds to both rings simultaneously and that a misfolded substrate acts as the trigger for ATP hydrolysis. More importantly, the φEL complex dissociates into two single rings resulting from an evolutionarily altered residue in the highly conserved ATP-binding pocket. Conformational changes also more than double the volume of the single-ring internal chamber such that larger viral proteins are accommodated. This is illustrated by the fact that φEL is capable of folding ß-galactosidase, a 116-kDa protein. Collectively, the architecture and protein-folding mechanism of the φEL chaperonin are significantly different from those observed in group I and II chaperonins.

Zinc-Containing Magnetic Oxides Stabilized by a Polymer: One Phase or Two?

Here we developed a new family of Zn-containing magnetic oxides of different structures by thermal decomposition of Zn(acac)2 in the reaction solution of preformed magnetite nanoparticles (NPs) stabilized by polyphenylquinoxaline. Upon an increase of the Zn(acac)2 loading from 0.15 to 0.40 mmol (vs 1 mmol of Fe(acac)3), the Zn content increases, and the Zn-containing magnetic oxide NPs preserve a spinel structure of magnetite and an initial, predominantly multicore NP morphology. X-ray photoelectron spectroscopy (XPS) of these samples revealed that the surface of iron oxide NPs is enriched with Zn, although Zn species were also found deep under the iron oxide NP surface. For all the samples, XPS also demonstrates the atom ratio of Fe(3+)/Fe(2+) = 2:1, perfectly matching Fe3O4, but not ZnFe2O4, where Fe(2+) ions are replaced with Zn(2+). The combination of XPS with other physicochemical methods allowed us to propose that ZnO forms an ultrathin amorphous layer on the surface of iron oxide NPs and also diffuses inside the magnetite crystals. At higher Zn(acac)2 loading, cubic ZnO nanocrystals coexist with magnetite NPs, indicating a homogeneous nucleation of the former. The catalytic testing in syngas conversion to methanol demonstrated outstanding catalytic properties of Zn-containing magnetic oxides, whose activities are dependent on the Zn loading. Repeat experiments carried out with the best catalyst after magnetic separation showed remarkable catalyst stability even after five consecutive catalytic runs.

Fabrication of magnetically recoverable catalysts based on mixtures of Pd and iron oxide nanoparticles for hydrogenation of alkyne alcohols.

We report a novel method for development of magnetically recoverable catalysts prepared by thermal decomposition of palladium acetylacetonate in the presence of iron oxide nanoparticles (NPs). Depending on conditions, the reaction results either in a dispersed mixture of Pd and iron oxide NPs or in their aggregates. It was demonstrated that the Pd loading, reaction temperature, solvent, and iron oxide NP size and composition are crucial to control the reaction product including the degree of aggregation of Pd and iron oxide NPs, and the catalyst properties. The aggregation controlled by polarization and magnetic forces allows faster magnetic separation, yet the aggregate sizes do not exceed a few hundred nanometers, making them suitable for various catalytic applications. These NP mixtures were studied in a selective hydrogenation of 2-methyl-3-butyn-2-ol to 2-methyl-3-buten-2-ol, demonstrating clear differences in catalytic behavior depending on the catalyst structure. In addition, one of the catalysts was also tested in hydrogenation of 3-methyl-1-pentyn-3-ol and 3-methyl-1-nonyn-3-ol, indicating some specificity of the catalyst toward different alkyne alcohols.

Multicore iron oxide mesocrystals stabilized by a poly(phenylenepyridyl) dendron and dendrimer: role of the dendron/dendrimer self-assembly.

We report the formation of multicore iron oxide mesocrystals using the thermal decomposition of iron acetyl acetonate in the presence of the multifunctional and rigid poly(phenylenepyridyl) dendron and dendrimer. We thoroughly analyze the influence of capping molecules of two different architectures and demonstrate for the first time that dendron/dendrimer self-assembly leads to multicore morphologies. Single-crystalline ordering in multicore NPs leads to cooperative magnetic behavior: mesocrystals exhibit ambient blocking temperatures, allowing subtle control over magnetic properties using a minor temperature change.

2,2'-Pyridylpyrrolide ligand redistribution following reduction.

The potential redox activity of the 2,2'-pyridylpyrrolide ligand carrying two CF3 substituents (L(2)) is investigated. Synthesis and characterization of d(6) and d(7) species M(L(2))2 for M = Fe and Co are described (both are nonplanar, but not tetrahedral), as are the Lewis acidity of each. In spite of CV evidence for quasireversible reductions to form M(L(2))2(q-) where q = 1 and 2, chemical reductants instead yield divalent metal complexes KM(L(2))3, which show attractive interactions of K(+) to pyrrolide, to F, and to lattice toluene π cloud. The collected evidence on these products indicates that pyridylpyrrolide is a weak field ligand here, but CO can force spin pairing in Fe(L(2))2(CO)2. Evidence is presented that the overall reductive reaction yields 33 mol % of bulk metal, which is the fate of the reducing equivalents, and a mechanism for this ligand redistribution is proposed. Analogous ligand redistribution behavior is also seen for nickel and for trimeric monovalent copper analogues; reduction of Cu(L(2))2 simply forms Cu(L(2))2(-).

γ-Fe2O3 nanoparticle surface controls PtFe nanoparticle growth and catalytic properties.

We report a novel method for synthesis of alloy PtFe nanoparticles (NPs) of different compositions using γ-Fe2O3 NPs as an iron source. We show here other growth mechanisms than conventional nucleation on a NP surface leading to core-shell NP or seeded NP growth. Depending on reaction conditions, different compositions of PtFe NPs can be obtained. PtFe NPs may coexist with γ-Fe2O3 NPs in the reaction product. This mixture obtained in situ allows much higher catalytic activity in hydrogenation of methyl-3-buten-2-ol than that of only PtFe nanoparticles or merely mixed PtFe and γ-Fe2O3 NPs. The presence of both PtFe and γ-Fe2O3 NPs allows formation of dense and stable NP arrays which hold promise for catalytic applications in microreactors or other reactor designs where a catalytic film is favoured.

Functionalization of monodisperse iron oxide NPs and their properties as magnetically recoverable catalysts.

Here we report the functionalization of monodisperse iron oxide nanoparticles (NPs) with commercially available functional acids containing multiple double bonds such as linolenic (LLA) and linoleic (LEA) acids or pyridine moieties such as 6-methylpyridine-2-carboxylic acid, isonicotinic acid, 3-hydroxypicolinic acid, and 6-(1-piperidinyl)pyridine-3-carboxlic acid (PPCA). Both double bonds and pyridine groups can be reacted with noble metal compounds to form catalytically active species in the exterior of magnetic NPs, thus making them promising magnetically recoverable catalysts. We determined that both LLA and LEA stabilize magnetic iron oxide NPs, allowing the formation of π-complexes with bis(acetonitrile)dichloropalladium(II) in the NP shells. In both cases, this leads to the formation of NP aggregates because of interparticle complexation. In the case of pyridine-containing ligands, only PPCA with two N-containing rings is able to provide NP stabilization and functionalization whereas other pyridine-containing acids did now allow sufficient steric stabilization. The interaction of PPCA-based particles with Pd acetate also leads to aggregation because of interparticle interactions, but the aggregates that are formed are much smaller. Nevertheless, the catalytic properties in the selective hydrogenation of dimethylethynylcarbinol (DMEC) to dimethylvinylcarbinol were the best for the catalyst based on LLA, demonstrating that the NP aggregates in all cases are penetrable for DMEC. Easy magnetic separation of this catalyst from the reaction solution makes it promising as a magnetically recoverable catalyst.

Protein P7 of the cystovirus φ6 is located at the three-fold axis of the unexpanded procapsid.

The objective of this study was to determine the location of protein P7, the RNA packaging factor, in the procapsid of the φ6 cystovirus. A comparison of cryo-electron microscopy high-resolution single particle reconstructions of the φ6 complete unexpanded procapsid, the protein P2-minus procapsid (P2 is the RNA directed RNA-polymerase), and the P7-minus procapsid, show that prior to RNA packaging the P7 protein is located near the three-fold axis of symmetry. Difference maps highlight the precise position of P7 and demonstrate that in P7-minus particles the P2 proteins are less localized with reduced densities at the three-fold axes. We propose that P7 performs the mechanical function of stabilizing P2 on the inner protein P1 shell which ensures that entering viral single-stranded RNA is replicated.