RESUMO
Olivine LiFePO4 covered flocculent carbon layers wrapped with carbon nanotubes (CNTs) prepared by sol-gel method and calcination is used as the cathode material for aqueous rechargeable lithium-ion batteries (ARLBs). The phase structures and morphologies of the composite material are characterized by X-ray diffraction (XRD), selected area electron diffraction (SAED), and transmission electron microscopy (TEM). The mechanism and method through which CNTs and flocculent carbon improve the electrochemical performance are investigated in an aqueous lithium-ion battery by setting up a comparative experiment. The ARLB system is assembled using a LiFePO4/C/CNTs cathode and a zinc anode in 1 mol L-1 ZnSO4·7H2O and saturated LiNO3 aqueous solution (pH = 6), which can deliver a capacity of 158 mA h g-1 at a rate of 1C. Even at a rate of 50C, it still has a capacity of 110 mA h g-1 after 250 cycles with fantastic capacity retention (95.7%). The lithium-ion diffusion coefficient increases by an order of magnitude due to the addition of CNTs together with flocculent carbon. Four LEDs are successfully powered by the ARLBs for more than one minute to demonstrate the practical application. The excellent rate capabilities and thrilling discharge capacity at a high rate indicate that this cathode material possesses excellent electrochemical performance, and this ARLB system exhibits excellent potential as a power source for environmental applications.
RESUMO
Bioactive glass (BG) is considered to be one of the most remarkable materials in the field of bone tissue regeneration due to its superior bioactivity. In this study, both un-treated and polyethylene glycols (PEG)-treated BG particles were prepared using a spray pyrolysis process to study the correlation between particle morphology and degradation behavior. The phase compositions, surface morphologies, inner structures, and specific surface areas of all BG specimens were examined by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption/desorption, respectively. Simulated body fluid (SBF) immersion evaluated the assessments of bioactivity and degradation behavior. The results demonstrate three particle morphologies of solid, porous, and hollow factors. The correlation between porosity, bioactivity, and degradation behavior was discussed.
RESUMO
Fe3O4-Ag Janus composites were synthesized using a two-step solvothermal method. The optimal growth process was determined by investigating the relationship between the particle morphologies and reaction time. Magnetic and Raman spectroscopic measurements showed that the as-synthesized Janus composites have both good magnetic response and significant surface-enhanced Raman scattering (SERS) effects, as well as reproducibility. The calculated Raman enhancement factor reached an unprecedented magnitude of 109 compared with the values of other Fe3O4-Ag compounds. Furthermore, the SERS effect was exhibited even at a concentration of probe molecules as low as 10-13 M. This demonstrates that the as-synthesized Fe3O4-Ag Janus composite particles have promise for application as separable, highly sensitive SERS substrates.
RESUMO
Phase changes between PdO and Pd metal can be directly detected in PdO/CeO2 catalysts supported on chi-Al2O3 by means of in situ high-temperature measurements of X-ray diffraction and FT-IR in relation to the catalytic activity for the methane oxidation of microcrystalline PdO. Reversible changes in the solid phases are observed from PdO to Pd and Pd to PdO under O2-deficient and O2-excess atmospheres, respectively. Nanosizes of PdO and Pd crystallites, the distorted PdO crystal structure along the (110) plane, and also a distorted Pd metal crystal structure along the (200) plane as well as the large surface area elucidate the high catalytic activity for the methane oxidation of PdO/CeO2 catalysts prepared with an atomic ratio of Pd:Ce = 1:1.
