Nuclear Transformation of the Marine Pennate Diatom Nitzschia sp. Strain NIES-4635 by Multi-Pulse Electroporation.

Nitzschia is one of the largest genera of diatoms found in a range of aquatic environments, from freshwater to seawater. This genus contains evolutionarily and ecologically unique species, such as those that have lost photosynthetic capacity or those that live symbiotically in dinoflagellates. Several Nitzschia species have been used as indicators of water pollution. Recently, Nitzschia species have attracted considerable attention in the field of biotechnology. In this study, a transformation method for the marine pennate diatom Nitzschia sp. strain NIES-4635, isolated from the coastal Seto Inland Sea, was established. Plasmids containing the promoter/terminator of the fucoxanthin chlorophyll a/c binding protein gene (fcp, or Lhcf) derived from Nitzschia palea were constructed and introduced into cells by multi-pulse electroporation, resulting in 500 µg/mL nourseothricin-resistant transformants with transformation frequencies of up to 365 colonies per 108 cells. In addition, when transformation was performed using a new plasmid containing a promoter derived from a diatom-infecting virus upstream of the green fluorescent protein gene (gfp), 44% of the nourseothricin-resistant clones exhibited GFP fluorescence. The integration of the genes introduced into the genomes of the transformants was confirmed by Southern blotting. The Nitzschia transformation method established in this study will enable the transformation this species, thus allowing the functional analysis of genes from the genus Nitzschia, which are important species for environmental and biotechnological development.

Challenges in applying highly active Pt-based nanostructured catalysts for oxygen reduction reactions to fuel cell vehicles.

The past 30 years have seen progress in the development of Pt-based nanocatalysts for the oxygen reduction reaction, and some are now in production on a commercial basis and used for polymer electrolyte fuel cells (PEFCs) for automotives and other applications. Further improvements in catalytic activity are required for wider uptake of PEFCs, however. In laboratories, researchers have developed various catalysts that have much higher activities than commercial ones, and these state-of-the-art catalysts have potential to improve energy conversion efficiencies and reduce the usage of platinum in PEFCs. There are several technical issues that must be solved before they can be applied in fuel cell vehicles, which require a high power density and practical durability, as well as high efficiency. In this Review, the development history of Pt-based nanocatalysts and recent analytical studies are summarized to identify the origin of these technical issues. Promising strategies for overcoming those issues are also discussed.

An allelic series at the KARRIKIN INSENSITIVE 2 locus of Arabidopsis thaliana decouples ligand hydrolysis and receptor degradation from downstream signalling.

Karrikins are butenolide compounds present in post-fire environments that can stimulate seed germination in many species, including Arabidopsis thaliana. Plants also produce endogenous butenolide compounds that serve as hormones, namely strigolactones (SLs). The receptor for karrikins (KARRIKIN INSENSITIVE 2; KAI2) and the receptor for SLs (DWARF14; D14) are homologous proteins that share many similarities. The mode of action of D14 as a dual enzyme receptor protein is well established, but the nature of KAI2-dependent signalling and its function as a receptor are not fully understood. To expand our knowledge of how KAI2 operates, we screened ethyl methanesulphonate (EMS)-mutagenized populations of A. thaliana for mutants with kai2-like phenotypes and isolated 13 new kai2 alleles. Among these alleles, kai2-10 encoded a D184N protein variant that was stable in planta. Differential scanning fluorimetry assays indicated that the KAI2 D184N protein could interact normally with bioactive ligands. We developed a KAI2-active version of the fluorescent strigolactone analogue Yoshimulactone Green to show that KAI2 D184N exhibits normal rates of ligand hydrolysis. KAI2 D184N degraded in response to treatment with exogenous ligands, suggesting that receptor degradation is a consequence of ligand binding and hydrolysis, but is insufficient for signalling activity. Remarkably, KAI2 D184N degradation was hypersensitive to karrikins, but showed a normal response to strigolactone analogues, implying that these butenolides may interact differently with KAI2. These results demonstrate that the enzymatic and signalling functions of KAI2 can be decoupled, and provide important insights into the mechanistic events that underpin butenolide signalling in plants.

Enhancement of butanol production by sequential introduction of mutations conferring butanol tolerance and streptomycin resistance.

Ribosome engineering, originally applied to Streptomyces lividans, has been widely utilized for strain improvement, especially for the activation of bacterial secondary metabolism. This study assessed ribosome engineering technology to modulate primary metabolism, taking butanol production as a representative example. The introduction into Clostridium saccharoperbutylacetonicum of mutations conferring resistance to butanol (ButR) and of the str mutation (SmR; a mutation in the rpsL gene encoding ribosomal protein S12), conferring high-level resistance to streptomycin, increased butanol production 1.6-fold, to 16.5 g butanol/L. Real-time qPCR analysis demonstrated that the genes involved in butanol metabolism by C. saccharoperbutylacetonicum were activated at the transcriptional level in the drug-resistant mutants, providing a mechanism for the higher yields of butanol by the mutants. Moreover, the activity of enzymes butyraldehyde dehydrogenase (AdhE) and butanol dehydrogenases (BdhAB), the key enzymes involved in butanol synthesis, was both markedly increased in the ButR SmR mutant, reflecting the significant up-regulation of adhE and bdhA at transcriptional level in this mutant strain. These results demonstrate the efficacy of ribosome engineering for the production of not only secondary metabolites but of industrially important primary metabolites. The possible ways to overcome the reduced growth rate and/or fitness cost caused by the mutation were also discussed.

Activities and Stabilities of Au-Modified Stepped-Pt Single-Crystal Electrodes as Model Cathode Catalysts in Polymer Electrolyte Fuel Cells.

The purpose of this study is to test the concept of protecting vulnerable sites on cathode catalysts in polymer electrolyte fuel cells. Pt single-crystal surfaces were modified by depositing Au atoms selectively on (100) step sites and their electrocatalytic activities for oxygen reduction reaction (ORR) and stabilities against potential cycles were examined. The ORR activities were raised by 70% by the Au modifications, and this rise in the activity was ascribed to enhanced local ORR activities on Pt(111) terraces by the surface Au atoms. The Au modifications also stabilized the Pt surfaces against potential cycles by protecting the low-coordinated (100) step sites from surface reorganizations. Thus, the surface modification by selective Au depositions on vulnerable sites is a promising method to enhance both the ORR activity and durability of the catalysts.

Kinetically induced irreversibility in electro-oxidation and reduction of Pt surface.

A mean field kinetic model was developed for electrochemical oxidations and reductions of Pt(111) on the basis of density functional theory calculations, and the reaction mechanisms were analyzed. The model reasonably describes asymmetric shapes of cyclic voltammograms and small Tafel slopes of relevant redox reactions observed in experiments without assuming any unphysical forms of rate equations. Simulations using the model indicate that the oxidation of Pt(111) proceeds via an electrochemical oxidation from Pt to PtOH and a disproportionation reaction from PtOH to PtO and Pt, while its reduction proceeds via two electrochemical reductions from PtO to PtOH and from PtOH to Pt.

Structural Requirements of Strigolactones for Shoot Branching Inhibition in Rice and Arabidopsis.

The structural requirements of strigolactones (SLs) involved in germination induction of root parasitic plants and hyphal branching in arbuscular mycorrhizal (AM) fungi have been extensively studied. However, our knowledge of the requirements of SLs involved in shoot branching inhibition in plants is still limited. To address this question, we investigated the structure-activity relationships of SLs in shoot branching inhibition in rice and Arabidopsis. SLs possess a four-ring structure, with a tricyclic lactone (ABC-rings) connected to a methylbutenolide part (D-ring) via an enol ether bridge. Here, we show that the the (R) configuration at C-2', which determines the steric position of the D-ring relative to the enol ether olefin bond, is critical for the hormonal activity in rice. Replacement of the enol ether moiety by an alkoxy or imino ether resulted in a severe reduction in biological activity in rice. Moreover, yeast two-hybrid experiments using a possible SL receptor, DWARF14 (D14), and a repressor in the SL signaling pathway, DWARF53 (D53), showed that D14 can interact with D53 in the presence of (2'R) stereoisomers of SLs, but not (2'S) stereoisomers, suggesting that the stereostructure of SLs is crucial for the interaction of these proteins. When GR5, an AB-ring-truncated analog, was applied to the hydroponic culture medium, strong inhibition of shoot branching was observed both in rice and in Arabidopsis. However, GR5 was only weakly active when directly applied to the axillary buds of Arabidopsis. Our results indicate that the difference in plant species and application methods greatly influences the apparent SL biological activity.

Transcripts of two ent-copalyl diphosphate synthase genes differentially localize in rice plants according to their distinct biological roles.

Gibberellins (GAs) are diterpenoid phytohormones that regulate various aspects of plant growth. Tetracyclic hydrocarbon ent-kaurene is a biosynthetic intermediate of GAs, and is converted from geranylgeranyl diphosphate, a common precursor of diterpenoids, via ent-copalyl diphosphate (ent-CDP) through successive cyclization reactions catalysed by two distinct diterpene synthases, ent-CDP synthase and ent-kaurene synthase. Rice (Oryza sativa L.) has two ent-CDP synthase genes, OsCPS1 and OsCPS2. It has been thought that OsCPS1 participates in GA biosynthesis, while OsCPS2 participates in the biosynthesis of phytoalexins, phytocassanes A-E, and oryzalexins A-F. It has been shown previously that loss-of-function OsCPS1 mutants display a severe dwarf phenotype caused by GA deficiency despite possessing another ent-CDP synthase gene, OsCPS2. Here, experiments were performed to account for the non-redundant biological function of OsCPS1 and OsCPS2. Quantitative reverse transcription-PCR (qRT-PCR) analysis showed that OsCPS2 transcript levels were drastically lower than those of OsCPS1 in the basal parts, including the meristem of the second-leaf sheaths of rice seedlings. qRT-PCR results using tissue samples prepared by laser microdissection suggested that OsCPS1 transcripts mainly localized in vascular bundle tissues, similar to Arabidopsis CPS, which is responsible for GA biosynthesis, whereas OsCPS2 transcripts mainly localized in epidermal cells that address environmental stressors such as pathogen attack. Furthermore, the OsCPS2 transgene under regulation of the OsCPS1 promoter complemented the dwarf phenotype of an OsCPS1 mutant, oscps1-1. The results indicate that transcripts of the two ent-CDP synthase genes differentially localize in rice plants according to their distinct biological roles, OsCPS1 for growth and OsCPS2 for defence.

First principles study of sulfuric acid anion adsorption on a Pt(111) electrode.

A first principles theory combined with a continuum electrolyte theory is applied to adsorption of sulfuric acid anions on Pt(111) in 0.1 M H(2)SO(4) solution. The theoretical free energy diagram indicates that sulfuric acid anions adsorb as bisulfate in the potential range of 0.41 < U ≤ 0.48 V (RHE) and as sulfate in 0.48 V (RHE) < U. This diagram also indicates that sulfate inhibits formations of surface oxide and hydroxide. Charge analysis shows that the total charge transferred for the formation of the full coverage sulfate adlayer is 90 µC cm(-2), and that the electrosorption valency value is -0.45 to -0.95 in 0.41 < U ≤ 0.48 V (RHE) and -1.75 to -1.85 in U > 0.48 V (RHE) in good agreement with experiments reported in the literature. Vibration analysis indicates that the vibration frequencies observed experimentally at 1250 and 950 cm(-1) can be assigned, respectively, to the S-O (uncoordinated) and symmetric S-O stretching modes for sulfate, and that the higher frequency mode has a larger potential-dependence (58 cm(-1) V(-1)) than the lower one.

First principles based mean field model for oxygen reduction reaction.

A first principles-based mean field model was developed for the oxygen reduction reaction (ORR) taking account of the coverage- and material-dependent reversible potentials of the elementary steps. This model was applied to the simulation of single crystal surfaces of Pt, Pt alloy and Pt core-shell catalysts under Ar and O(2) atmospheres. The results are consistent with those shown by past experimental and theoretical studies on surface coverages under Ar atmosphere, the shape of the current-voltage curve for the ORR on Pt(111) and the material-dependence of the ORR activity. This model suggests that the oxygen associative pathway including HO(2)(ads) formation is the main pathway on Pt(111), and that the rate determining step (RDS) is the removal step of O(ads) on Pt(111). This RDS is accelerated on several highly active Pt alloys and core-shell surfaces, and this acceleration decreases the reaction intermediate O(ads). The increase in the partial pressure of O(2)(g) increases the surface coverage with O(ads) and OH(ads), and this coverage increase reduces the apparent reaction order with respect to the partial pressure to less than unity. This model shows details on how the reaction pathway, RDS, surface coverages, Tafel slope, reaction order and material-dependent activity are interrelated.