Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 5 de 5
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Int J Biol Macromol ; 215: 691-704, 2022 Aug 31.
Artigo em Inglês | MEDLINE | ID: mdl-35777518

RESUMO

Producing hydrogels capable of mimicking the biomechanics of soft tissue remains a challenge. We explore the potential of plant-based hydrogels as polysaccharide tragacanth gum and antioxidant lignin nanoparticles in bioactive multicomponent hydrogels for tissue engineering. These natural components are combined with TEMPO-oxidized cellulose nanofibrils, a material with known shear thinning behavior. Hydrogels presented tragacanth gum (TG) concentration-dependent rheological properties suitable for extrusion 3D printing. TG enhanced the swelling capacity up to 645% and the degradation rate up to 1.3%/day for hydrogels containing 75% of TG. Young's moduli of the hydrogels varied from 5.0 to 11.6 kPa and were comparable to soft tissues like skin and muscle. In vitro cell viability assays revealed that the scaffolds were non-toxic and promoted proliferation of hepatocellular carcinoma HepG2 cells. Therefore, the plant-based hydrogels designed in this work have a significant potential for tissue engineering.


Assuntos
Hidrogéis , Tragacanto , Impressão Tridimensional , Reologia , Engenharia Tecidual , Alicerces Teciduais
2.
Biotechnol Biofuels ; 14(1): 114, 2021 May 06.
Artigo em Inglês | MEDLINE | ID: mdl-33957955

RESUMO

Plant-biomass-based nanomaterials have attracted great interest recently for their potential to replace petroleum-sourced polymeric materials for sustained economic development. However, challenges associated with sustainable production of lignocellulosic nanoscale polymeric materials (NPMs) need to be addressed. Producing materials from lignocellulosic biomass is a value-added proposition compared with fuel-centric approach. This report focuses on recent progress made in understanding NPMs-specifically lignin nanoparticles (LNPs) and cellulosic nanomaterials (CNMs)-and their sustainable production. Special attention is focused on understanding key issues in nano-level deconstruction of cell walls and utilization of key properties of the resultant NPMs to allow flexibility in production to promote sustainability. Specifically, suitable processes for producing LNPs and their potential for scaled-up production, along with the resultant LNP properties and prospective applications, are discussed. In the case of CNMs, terminologies such as cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) used in the literature are examined. The term cellulose nano-whiskers (CNWs) is used here to describe a class of CNMs that has a morphology similar to CNCs but without specifying its crystallinity, because most applications of CNCs do not need its crystalline characteristic. Additionally, progress in enzymatic processing and drying of NPMs is also summarized. Finally, the report provides some perspective of future research that is likely to result in commercialization of plant-based NPMs.

3.
Langmuir ; 36(51): 15592-15602, 2020 12 29.
Artigo em Inglês | MEDLINE | ID: mdl-33326249

RESUMO

The transformation of a molecularly complex and irregularly shaped lignin into a nanoscale spherical architecture is anticipated to play a pivotal role in the promotion of lignin valorization. From the standpoint of using colloidal lignin particles (CLPs) as building blocks for a diverse range of applications, it has become essential to study their interactions with soluble compounds of varied origin. However, the lack of model films with well-defined surface properties similar to those of CLPs has hindered fundamental studies using surface-sensitive techniques. Here, we report well-defined and stable thin films prepared from CLPs and demonstrate their suitability for investigation of surface phenomena. Direct adsorption on substrates coated with a cationic anchoring polymer resulted in uniform distribution of CLPs as shown with atomic force microscopy (AFM). Quartz crystal microbalance with dissipation monitoring (QCM-D) experiments revealed higher adsorbed mass of cationic lignin onto the CLP-coated substrate in comparison to the film prepared from dissolved lignin, suggesting preferential adsorption via the carboxylic acid enriched surfaces of CLPs. QCM-D further enabled detection of small changes such as particle swelling or partial dissolution not detectable via bulk methods such as light scattering. The CLP thin films remained stable until pH 8 and displayed only a low degree of swelling. Increasing the pH to 10 led to some instability, but their spherical geometry remained intact until complete dissolution was observed at pH 12. Particles prepared from aqueous acetone or aqueous tetrahydrofuran solution followed similar trends regarding adsorption, pH stability, and wetting, although the particle size affected the magnitude of adsorption. Overall, our results present a practical way to prepare well-defined CLP thin films that will be useful not only for fundamental studies but also as a platform for testing stability and interactions of lignin nanoparticles with materials of technical and biomedical relevance.

4.
Biomacromolecules ; 21(5): 1875-1885, 2020 05 11.
Artigo em Inglês | MEDLINE | ID: mdl-31992046

RESUMO

Three-dimensional (3D) printing has been an emerging technique to fabricate precise scaffolds for biomedical applications. Cellulose nanofibril (CNF) hydrogels have attracted considerable attention as a material for 3D printing because of their shear-thinning properties. Combining cellulose nanofibril hydrogels with alginate is an effective method to enable cross-linking of the printed scaffolds in the presence of Ca2+ ions. In this work, spherical colloidal lignin particles (CLPs, also known as spherical lignin nanoparticles) were used to prepare CNF-alginate-CLP nanocomposite scaffolds. High-resolution images obtained by atomic force microscopy (AFM) showed that CLPs were homogeneously mixed with the CNF hydrogel. CLPs brought antioxidant properties to the CNF-alginate-CLP scaffolds in a concentration-dependent manner and increased the viscosity of the hydrogels at a low shear rate, which correspondingly provide better shape fidelity and printing resolution to the scaffolds. Interestingly, the CLPs did not affect the viscosity at high shear rates, showing that the shear thinning behavior typical for CNF hydrogels was retained, enabling easy printing. The CNF-alginate-CLP scaffolds demonstrated shape stability after printing, cross-linking, and storage in Dulbecco's phosphate buffer solution (DPBS +) containing Ca2+ and Mg2+ ions, up to 7 days. The 3D-printed scaffolds showed relative rehydration ratio values above 80% after freeze-drying, demonstrating a high water-retaining capability. Cell viability tests using hepatocellular carcinoma cell line HepG2 showed no negative effect of CLPs on cell proliferation. Fluorescence microscopy indicated that HepG2 cells grew not only on the surfaces but also inside the porous scaffolds. Overall, our results demonstrate that nanocomposite CNF-alginate-CLP scaffolds have high potential in soft-tissue engineering and regenerative-medicine applications.


Assuntos
Alginatos , Hidrogéis , Técnicas de Cultura de Células , Celulose , Lignina , Impressão Tridimensional , Engenharia Tecidual , Alicerces Teciduais
5.
ACS Macro Lett ; 5(10): 1185-1190, 2016 Oct 18.
Artigo em Inglês | MEDLINE | ID: mdl-35658182

RESUMO

The behavior of nanoparticles in solution is largely dominated by their shape and interaction potential. Despite considerable progress in the preparation of patchy and compartmentalized particles, access to nanoparticles with complex surface patterns and topographies remains limited. Here, we show that polyanionic brushes tethered to rod-like cellulose nanocrystals (CNCs) spontaneously develop a striped or helical topography through interpolyelectrolyte complexation with polycationic diblock copolymers. Using cryogenic transmission electron microscopy (cryo-TEM) and tomography (cryo-ET), we follow the complexation process and analyze the delicate 3D topography on the CNC surface. The described approach is facile and modular and can be extended to other block chemistries, nanoparticles, and surfaces, thereby providing a versatile platform toward surface-patterned particles with complex topographies and spatially arranged functional groups.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...