Getting the feel of food structure with atomic force microscopy.

This article describes the progress in the development of the atomic force microscope as an imaging tool and a force transducer, with particular reference to applications in food science. Use as an imaging tool has matured and emphasis is placed on the novel insights gained from the use of the technique to study food macromolecules and food colloids, and the subsequent applications of this new knowledge in food science. Use as a force transducer is still emerging and greater emphasis is given on the methodology and analysis. Where available, applications of force measurements between molecules or between larger colloidal particles are discussed, where they have led to new insights or solved problems related to food science. The future prospects of the technique in imaging or through force measurements are discussed.

Structural changes in cell wall pectins during strawberry fruit development.

Strawberry (Fragaria × anannasa Duch.) is one of the most important soft fruit. Rapid loss of firmness occurs during the ripening process, resulting in a short shelf life and high economic losses. To get insight into the role of pectin matrix in the softening process, cell walls from strawberry fruit at two developmental stages, unripe-green and ripe-red, were extracted and sequentially fractionated with different solvents to obtain fractions enriched in a specific component. The yield of cell wall material as well as the per fresh weight contents of the different fractions decreased in ripe fruit. The largest reduction was observed in the pectic fractions extracted with a chelating agent (trans-1,2- diaminocyclohexane-N,N,N'N'-tetraacetic acid, CDTA fraction) and those covalently bound to the wall (extracted with Na2CO3). Uronic acid content of these two fractions also decreased significantly during ripening, but the amount of soluble pectins extracted with phenol:acetic acid:water (PAW) and water increased in ripe fruit. Fourier transform infrared spectroscopy of the different fractions showed that the degree of esterification decreased in CDTA pectins but increased in soluble fractions at ripen stage. The chromatographic analysis of pectin fractions by gel filtration revealed that CDTA, water and, mainly PAW polyuronides were depolymerised in ripe fruit. By contrast, the size of Na2CO3 pectins was not modified. The nanostructural characteristics of CDTA and Na2CO3 pectins were analysed by atomic force microscopy (AFM). Isolated pectic chains present in the CDTA fractions were significantly longer and more branched in samples from green fruit than those from red fruit. No differences in contour length were observed in Na2CO3 strands between samples of both stages. However, the percentage of branched chains decreased from 19.7% in unripe samples to 3.4% in ripe fruit. The number of pectin aggregates was higher in green fruit samples of both fractions. These results show that the nanostructural complexity of pectins present in CDTA and Na2CO3 fractions diminishes during fruit development, and this correlates with the solubilisation of pectins and the softening of the fruit.

Unravelling the nanostructure of strawberry fruit pectins by endo-polygalacturonase digestion and atomic force microscopy.

Pectins analysed by AFM are visualized as individual chains, branched or unbranched, and aggregates. To investigate the nature of these structures, sodium carbonate soluble pectins from strawberry fruits were digested with endo-polygalacturonase M2 from Aspergillus aculeatus and visualized by AFM. A gradual decrease in the length of chains was observed as result of the treatment, reaching a minimum LN value of 22nm. The branches were not visible after 2h of enzymatic incubation. The size of complexes also diminished significantly with the enzymatic digestion. A treatment to hydrolyse rhamnogalacturonan II borate diester bonds neither affected chains length or branching nor complex size but reduced the density of aggregates. These results suggest that chains are formed by a mixture of homogalacturonan and more complex molecules composed by a homogalacturonan unit linked to an endo-PG resistant unit. Homogalacturonan is a structural component of the complexes and rhamnogalacturonan II could be involved in their formation.

Visualisation of xanthan conformation by atomic force microscopy.

Direct visual evidence obtained by atomic force microscopy demonstrates that when xanthan is adsorbed from aqueous solution onto the heterogeneously charged substrate mica, its helical conformation is distorted. Following adsorption it requires annealing for several hours to restore its ordered helical state. Once the helix state reforms, the AFM images obtained showed clear resolution of the periodicity with a value of 4.7nm consistent with the previously predicted models. In addition, the images also reveal evidence that the helix is formed by a double strand, a clarification of an ambiguity of the xanthan ultrastructure that has been outstanding for many years.

Modified sugar beet pectin induces apoptosis of colon cancer cells via an interaction with the neutral sugar side-chains.

Pectins extracted from a variety of sources and modified with heat and/or pH have previously been shown to exhibit activity towards several cancer cell lines. However, the structural basis for the anti-cancer activity of modified pectin requires clarification. Sugar beet and citrus pectin extracts have been compared. Pectin extracted from sugar beet pulp only weakly affected the viability of colon cancer cells. Alkali treatment increased the anti-cancer effect of sugar beet pectin via an induction of apoptosis. Alkali treatment decreased the degree of esterification (DE) and increased the ratio of rhamnogalacturonan I (RGI) to homogalacturonan. Low DE per se did not play a significant role in the anti-cancer activity. However, the enzymatic removal of galactose and, to a lesser extent, arabinose from the pectin decreased the effect on cancer cells indicating that the neutral sugar-containing RGI regions are important for pectin bioactivity.

The nanostructural characterization of strawberry pectins in pectate lyase or polygalacturonase silenced fruits elucidates their role in softening.

To ascertain the role of pectin disassembly in fruit softening, chelated- (CSP) and sodium carbonate-soluble (SSP) pectins from plants with a pectate lyase, FaplC, or a polygalacturonase, FaPG1, downregulated by antisense transformation were characterized at the nanostructural level. Fruits from transgenic plants were firmer than the control, although FaPG1 suppression had a greater effect on firmness. Size exclusion chromatography showed that the average molecular masses of both transgenic pectins were higher than that of the control. Atomic force microscopy analysis of pectins confirmed the higher degree of polymerization as result of pectinase silencing. The mean length values for CSP chains increased from 84 nm in the control to 95.5 and 101 nm, in antisense FaplC and antisense FaPG1 samples, respectively. Similarly, SSP polyuronides were longer in transgenic fruits (61, 67.5 and 71 nm, in the control, antisense FaplC and antisense FaPG1 samples, respectively). Transgenic pectins showed a more complex structure, with a higher percentage of branched chains than the control, especially in the case of FaPG1 silenced fruits. Supramolecular pectin aggregates, supposedly formed by homogalacturonan and rhamnogalacturonan I, were more frequently observed in antisense FaPG1 samples. The larger modifications in the nanostructure of pectins in FaPG1 silenced fruits when compared with antisense pectate lyase plants correlate with the higher impact of polygalacturonase silencing on reducing strawberry fruit softening.

Rhamnogalacturonan I containing homogalacturonan inhibits colon cancer cell proliferation by decreasing ICAM1 expression.

Pectin modified with pH, heat or enzymes, has previously been shown to exhibit anti-cancer activity. However, the structural requirements for modified pectin bioactivity have rarely been addressed. In this study several pectin extracts representing different structural components of pectin were assessed for effects against colon cancer cells. Rhamnogalacturonan I (RGI) extracts reduced proliferation of DLD1 and HCT116 colon cancer cells in a dose- and time-dependent manner. RGI reduced ICAM1 gene expression and siRNA-mediated knockdown of ICAM1 expression decreased cell proliferation providing a potential novel mechanism for the anti-cancer activity of pectin. Structural analysis of bioactive and non-bioactive RGIs suggested that a homogalacturonan component is maybe essential for the anti-proliferative activity, furthering the understanding of the structural requirements for pectin bioactivity.

In situ mapping of the effect of additional mutations on starch granule structure in amylose-extender (ae) maize kernels.

Optical (KI/I2-staining, polarised) and FTIR microscopy has been used to monitor starch granule structure within wild-type (wt), GEMS-0067 and waxy-amylose-extender (wx-ae) maize mutant kernels. In the GEMS-0067 mutant containing the high amylose modifier (HAM) gene(s) plus the recessive ae gene, structural heterogeneity characteristic of the ae mutation was reduced markedly. However, enhanced variation in granule shape and size was observed distributed spatially within the kernel, which appears to be related to new heterogeneity in internal starch granule structure. In wx-ae starch mutants the ae gene led to heterogeneity of starch granule structure equivalent to that in single ae mutants, plus new structural heterogeneity coincident with novel induced variation in granule size and shape.

Fruit softening and pectin disassembly: an overview of nanostructural pectin modifications assessed by atomic force microscopy.

BACKGROUND: One of the main factors that reduce fruit quality and lead to economically important losses is oversoftening. Textural changes during fruit ripening are mainly due to the dissolution of the middle lamella, the reduction of cell-to-cell adhesion and the weakening of parenchyma cell walls as a result of the action of cell wall modifying enzymes. Pectins, major components of fruit cell walls, are extensively modified during ripening. These changes include solubilization, depolymerization and the loss of neutral side chains. Recent evidence in strawberry and apple, fruits with a soft or crisp texture at ripening, suggests that pectin disassembly is a key factor in textural changes. In both these fruits, softening was reduced as result of antisense downregulation of polygalacturonase genes. Changes in pectic polymer size, composition and structure have traditionally been studied by conventional techniques, most of them relying on bulk analysis of a population of polysaccharides, and studies focusing on modifications at the nanostructural level are scarce. Atomic force microscopy (AFM) allows the study of individual polymers at high magnification and with minimal sample preparation; however, AFM has rarely been employed to analyse pectin disassembly during fruit ripening. SCOPE: In this review, the main features of the pectin disassembly process during fruit ripening are first discussed, and then the nanostructural characterization of fruit pectins by AFM and its relationship with texture and postharvest fruit shelf life is reviewed. In general, fruit pectins are visualized under AFM as linear chains, a few of which show long branches, and aggregates. Number- and weight-average values obtained from these images are in good agreement with chromatographic analyses. Most AFM studies indicate reductions in the length of individual pectin chains and the frequency of aggregates as the fruits ripen. Pectins extracted with sodium carbonate, supposedly located within the primary cell wall, are the most affected.

Structural variability between starch granules in wild type and in ae high-amylose mutant maize kernels.

Starch granule structure within wild-type and ae high-amylose mutant maize kernels has been mapped in situ using light, electron and atomic force microscopy, and both Raman and infra-red spectroscopy. The population of wild-type starch granules is found to be homogenous. The ae mutant granule population is heterogeneous. Heterogeneity in chemical and physical structure is observed within individual granules, between granules within cells, and spatially within the kernel. The highest level of heterogeneity is observed in the region where starch is first deposited during kernel development. Light microscopy demonstrates structural diversity through use of potassium iodide/iodine staining and polarised microscopy. Electron and atomic force microscopy, and infra-red and Raman spectroscopy defined the nature of the structural changes within granules. The methodology provides novel information on the changes in starch structure resulting from kernel development.

Combined QCMD and AFM studies of lysozyme and poly-L-lysine-poly-galacturonic acid multilayers.

A quartz crystal microbalance with dissipation monitoring (QCMD) has been used to monitor the adsorption and structure of lysozyme monolayers and multilayers, and poly-L-lysine (PLL)-polygalacturonic acid (PGalA) multilayers at a solid-liquid interface using freshly-cleaved mica as a substrate. QCMD measurements were complemented with atomic force microscopy (AFM). AFM images revealed that lysozyme formed incomplete monolayers and provided a basis for calculation of the thickness of the protein film. Comparative studies of adsorption onto standard and mica-coated quartz crystals showed higher areal mass adsorption and a longer-time adsorption process for mica-coated quartz crystals. Simultaneous AFM images and QCMD data were obtained for lysozyme, linear PLL-PGalA and 7 nm PLL dendrimer-PGalA multilayers. The layer-by-layer deposited multilayer films exhibited viscoelastic properties and their growth followed a non-linear regime, associated with the PLL diffusion in and out of the film formation for linear PLL-PGalA films. For the PLL 7 nm dendrimer-PGalA films the AFM images revealed marked changes in surface roughness during layer by layer deposition: these changes influence the interpretation of the QCMD data and provide additional information on the growth and structure of the multilayers.

Atomic force microscopy as a nanoscience tool in rational food design.

Atomic force microscopy (AFM) is a nanoscience tool that has been used to provide new information on the molecular structure of food materials. As an imaging tool it has led to solutions to previously intractable problems in food science. This type of information can provide a basis for tailoring food structures to optimise functional behaviour. Such an approach will be illustrated by indicating how a basic understanding of the role of interfacial stability in complex foods systems can be extended to understand how such interfacial structures behave on digestion, and how this in turn suggests routes for the rational design of processed food structures to modify lipolysis and control fat intake. As a force transducer AFM can be used to probe interactions between food structures such as emulsion droplets at the colloidal level. This use of force spectroscopy will be illustrated through showing how it allows the effect of the structural modification of interfacial structures on colloidal interactions to be probed in model emulsion systems. Direct studies on interactions between colliding soft, deformable droplets reveal new types of interactions unique to deformable particles that can be exploited to manipulate the behaviour of processed or natural emulsion structures involved in digestion processes. Force spectroscopy can be adapted to probe specific intermolecular interactions, and this application of the technique will be illustrated through its use to test molecular hypotheses for the bioactivity of modified pectin molecules.

Rheological and microstructural investigation of oat ß-glucan isolates varying in molecular weight.

The rheological properties and microstructure of aqueous oat ß-glucan solutions varying in molecular weight were investigated. The structural features and molecular weights (MW) were characterized by (13)C NMR spectroscopy and high performance size-exclusion chromatography (HPSEC), respectively. The microstructure of the ß-glucans dispersions was also examined by atomic force microscopy (AFM). The samples with ß-glucan content between 78 and 86% on a dry weight basis had MW, intrinsic viscosity ([η]) and critical concentration (c*) in the range of 142-2800×10(3)g/mol, 1.7-7.2dl/g and 0.25-1.10g/dl, respectively. The flow and viscoelastic behaviour was highly dependent on MW and on the concentration of the ß-glucans dispersions. Pseudoplastic behaviour was exhibited at high concentrations and Newtonian behaviour was evident at low concentrations. At the same concentration, the viscosity was higher for higher MW samples. The Cox-Merz rule was applicable for the lower molecular weight samples at higher concentrations whereas the high molecular weight sample deviated at concentrations greater than 1.0%, w/v. The mechanical spectra with variation of both MW and concentration were typical of entangled biopolymer solutions. AFM images revealed the formation of clusters or aggregates linked via individual polymer chains scattered heterogeneously throughout the system. The aggregate size increased with the molecular weight of the samples investigated and has been linked to the rheological behaviour of the samples.

Surface characterization and AFM imaging of mixed fibrinogen-surfactant films.

This study describes the adsorption behavior of mixed protein/surfactant systems at the air-water interface: specifically fibrinogen and the fluorinated and hydrogenated surfactants (C(8)FONa, C(8)HONa, and C(12)HONa). Surface tension techniques and atomic force microscopy (AFM) have been combined to investigate the adsorption behavior of these mixed systems. Interfacial rheology showed that fibrinogen has a low dilatational modulus at the air-water interface when compared to other proteins, suggesting the formation of a weak surface network. Fluorinated and hydrogenated surfactants severely decreased the dilatational modulus of the adsorbed fibrinogen film at the air-water interface. These measurements suggest the progressive displacement of fibrinogen from the air-water interface by both types of surfactants. However, in the case of fibrinogen/fluorinated surfactant systems, surface tension and dilatational rheology measurements suggest the formation of complexes with improved surface activity. AFM imaging of fibrinogen in the presence and absence of surfactants provided new information on the structure of mixed surface films, and revealed new features of the interaction of fibrinogen with hydrogenated and fluorinated surfactants. These studies suggest complexes formed between fibrinogen and fluorinated surfactants which are more surface active than fibrinogen, while the absence of interaction between fibrinogen and hydrogenated surfactants (C(8)HONa and C(12)HONa) results in compaction of the surface layer.

Taking multicalixarenes into the nanoworld: first third-generation calixarene dendrimer.

We report the first synthesis of a dendritic multicalixarene, featuring twenty-one calixarene units, which when adsorbed onto mica, forms regular assemblies which can then further aggregate to form larger clusters.

Effect of gastric conditions on ß-lactoglobulin interfacial networks: influence of the oil phase on protein structure.

Understanding the effects of digestion conditions on the structure of interfacial protein networks is important in order to rationally design food emulsions which can moderate lipid digestion. This study compares the effect of gastric conditions (pH, temperature, and ionic strength) on ß-lactoglobulin films at different fluid interfaces: air-water, tetradecane-water, and olive oil-water. The experiments have been designed to simulate the passage into the stomach media. Hence, preformed interfacial protein (ß-lactoglobulin) networks have been exposed to gastric conditions in order to establish generic aspects of the digestion process. The results show that the presence of an oil phase affects both the unfolding of the protein at the interface on adsorption and the subsequent interprotein associations responsible for network formation at the interface. Furthermore, the effects of the physiological conditions characteristic of the stomach also altered differently the preformed protein layer at different fluid interfaces. Initially, the effects of temperature, acid pH, and ionic strength on the dilatational modulus of ß-lactoglobulin adsorbed layers at tetradecane-water and olive oil-water interfaces were studied in isolation. The presence of salt was found to have a major effect on the dilatational response at the oil-water interface in contrast to the observations at the air-water interface: it enhanced intermolecular association, hence increasing the packing at the interface causing it to become more elastic. Exposure to acid pH (2.5) also increased the elasticity of the interface, possibly due to the fact that strong electrostatic interactions acting at the interface compensated for the reduced level of intermolecular association. However, the increase in dilatational modulus at the oil-water interface was less noticeable upon exposure to combined changes in acid pH and ionic strength, as would occur in the stomach. This is consistent with previously reported observations at the air-water interface. The quantitative differences in the response of the protein networks to gastric media at different fluid interfaces are discussed in terms of the conformation of ß-lactoglobulin within the networks formed at each interface based on detailed theoretical modeling of adsorption data.

Probing the in situ competitive displacement of protein by nonionic surfactant using atomic force microscopy.

Force-distance data obtained from an atomic force microscope have been used to follow the in situ displacement of beta-lactoglobulin from tetradecane droplets by Tween 20 (polyoxyethylenesorbitan monolaurate). Interpretation of the force-distance curves has shown that the slope of the region, traditionally termed the constant compliance region, is a useful indicator of droplet deformation within a given experiment. The magnitude of this slope can be used to monitor how the deformability of the droplet changes upon addition of surfactant. It has been found that, immediately after initial addition of surfactant, there is an increase in magnitude of this slope, indicating a stiffening of the droplet, attributed to a stiffening of the protein network formed at the surface of the droplet. Subsequent additions of Tween 20 reduce the magnitude of the slope until an equilibrium value is reached, where the interface becomes surfactant-dominated. These observations suggest that it is possible to monitor in situ the displacement of protein from individual oil droplets. The data have been interpreted in terms of the "orogenic" model of displacement, which is based on studies made on model interfaces. These data have been compared to those obtained using the more traditional techniques of dilatational rheology, surface loading, and surface potential measurements for analogous beta-lactoglobulin-stabilized droplets or emulsions.

Adsorption of bile salts and pancreatic colipase and lipase onto digalactosyldiacylglycerol and dipalmitoylphosphatidylcholine monolayers.

It is increasingly recognized that changes in the composition of the oil-water interface can markedly affect pancreatic lipase adsorption and function. To understand interfacial mechanisms determining lipase activity, we investigated the adsorption behavior of bile salts and pancreatic colipase and lipase onto digalactosyldiacylglycerol (DGDG) and dipalmitoylphosphatidylcholine (DPPC) monolayers at the air-water interface. The results from Langmuir trough and pendant drop experiments showed that a DGDG interface was more resistant to the adsorption of bile salts, colipase, and lipase compared to that of DPPC. Atomic force microscopy (AFM) images showed that the adsorption of bile salts into a DPPC monolayer decreased the size of the liquid condensed (LC) domains while there was no visible topographical change for DGDG systems. The results also showed that colipase and lipase adsorbed exclusively onto the mixed DPPC-bile salt regions and not the DPPC condensed phase. When the colipase and lipase were in excess, they fully covered the mixed DPPC-bile salt regions. However, the colipase and lipase coverage on the mixed DGDG-bile salt monolayer was incomplete and discontinuous. It was postulated that bile salts adsorbed into the DPPC monolayers filling the gaps between the lipid headgroups and spacing out the lipid molecules, making the lipid hydrocarbon tails more exposed to the surface. This created hydrophobic patches suitable for the binding of colipase and lipase. In contrast, bile salts adsorbed less easily into the DGDG monolayer because DGDG has a larger headgroup, which has strong intermolecular interactions and the ability to adopt different orientations at the interface. Thus, there are fewer hydrophobic patches that are of sufficient size to accommodate the colipase on the mixed DGDG-bile salt monolayer compared to the mixed DPPC-bile salt regions. The results from this work have reinforced the hypothesis that the interfacial molecular packing of lipids at the oil-water interface influences the adsorption of bile salts, colipase, and lipase, which in turn impacts the rate of lipolysis.

A new view of pectin structure revealed by acid hydrolysis and atomic force microscopy.

Individual pectin polymers and complexes, isolated from the pericarp of unripe tomato (Lycopersicon esculentum var. Rutgers), were subjected to a mild acid hydrolysis and visualised and characterised by atomic force microscopy (AFM). The AFM images confirm earlier studies showing that individual pectic polysaccharides often possess long branches. The AFM data have been used to construct size and molecular weight distributions for the single molecules and complexes, from which the calculated number-average and weight-average molecular weights can then be compared directly with the published literature data on the rheology of bulk samples. Loss of the neutral sugars arabinose, galactose and rhamnose from the pectin samples does not significantly alter either the size or the branching density of the individual polymers, but is reflected in a breakdown of the complexes. Significant loss of galacturonic acid at long hydrolysis times was found to be accompanied by changes in the size and branching of the single polymers and further breakdown of the complexes. The results suggest that rhamnose, arabinose and galactose are not the major components of the individual polymers but are, instead, confined to the complexes. The polysaccharides represent a previously unrecognised branched homogalacturonan with a minimum mean size some three times larger than that previously reported. The complexes consist of homogalacturonans (HGs) held together by rhamnogalacturonan I (RG-I) regions. Comparison of the rate of depolymerisation of the homogalacturonans and complexes with the published data on changes in the intrinsic viscosity of bulk pectin samples, subjected to similar acid hydrolysis, suggests that the different rates of depolymerisation of RG-I and HG contribute separately to the observed changes in intrinsic viscosity during acid hydrolysis. Thus data obtained using a single molecule microscopy technique provides new insights into the behaviour in the bulk.

Recognition of galactan components of pectin by galectin-3.

It has been reported that modified forms of pectin possess anticancer activity. To account for this bioactivity, it has been proposed that fragments of pectin molecules can act by binding to and inhibiting the various roles of the mammalian protein galectin 3 (Gal3) in cancer progression and metastasis. Despite this clear molecular hypothesis and evidence for the bioactivity of modified pectin, the structural origins of the "bioactive fragments" of pectin molecules are currently ill defined. By using a combination of fluorescence microscopy, flow cytometry, and force spectroscopy, it has been possible to demonstrate, for the first time, specific binding of a pectin galactan to the recombinant form of human Gal3. Present studies suggest that bioactivity resides in the neutral sugar side chains of pectin polysaccharides and that these components could be isolated and modified to optimize bioactivity.