Effect of premolar extraction and anchorage type for orthodontic space closure on upper airway dimensions and position of hyoid bone in adults: a retrospective cephalometric assessment.

Background: This study aimed to assess the effect of premolar extraction and anchorage type for orthodontic space closure on upper airway dimensions and position of hyoid bone in adults by cephalometric assessment. Methods: This retrospective study was conducted on 142 cephalograms of patients who underwent orthodontic treatment with premolar extraction in four groups of (I) 40 class I patients with bimaxillary protrusion and maximum anchorage, (II) 40 class I patients with moderate crowding and anchorage, (III) 40 class II patients with maximum anchorage, and (IV) 22 skeletal class III patients with maximum anchorage. The dimensions of the nasopharynx, velopharynx, oropharynx, and hypopharynx, and hyoid bone position were assessed on pre- and postoperative lateral cephalograms using AudaxCeph v6.1.4.3951 software. Data were analyzed by the Chi-square test, paired t-test, and Pearson's correlation test (alpha = 0.05). Results: A significant reduction in oropharyngeal, velopharyngeal, and hypopharyngeal airway dimensions was noted in groups I, III, and IV (P < 0.001), which was correlated with the magnitude of retraction of upper and lower incisors (r = 0.6 - 0.8). In group II, a significant increase was observed in oropharyngeal and velopharyngeal dimensions (P < 0.001). A significant increase in nasopharyngeal dimensions occurred in all groups (P < 0.001). Also, in groups I and III, the position of hyoid bone changed downwards and backwards, which was correlated with reduction in airway dimensions (r = 0.4 - 0.6). Conclusion: According to the present results, extraction orthodontic treatment affects upper airway dimensions and hyoid bone position. Maximum anchorage decreases airway dimensions while moderate anchorage increases airway dimensions.

Relationship of the Morphology and Size of Sella Turcica with Dental Anomalies and Skeletal Malocclusions.

This study aimed to assess the relationship of the morphology and size of the sella turcica (ST) with dental anomalies and skeletal malocclusions. This cross-sectional study was conducted on records of fixed orthodontic patients treated between 2013 and 2022. Cephalometric analysis was performed to determine the anteroposterior and vertical skeletal patterns. Preoperative panoramic radiographs and lateral cephalograms, intraoral photographs, and primary dental casts of patients were used to detect dental anomalies. Gender, sagittal and vertical skeletal patterns, dental anomalies, and dimensions (length, depth, and diameter), and morphology of the ST were all recorded according to the lateral cephalograms of patients. Data were analyzed using independent t-test, one-way and two-way ANOVA, Chi-square test, and log rank test (alpha = 0.05). The depth and diameter of the ST had no significant correlation with gender (p > 0.05); however, the length of the ST was significantly longer in males than females (p < 0.05). The morphology of the ST had a significant correlation with gender (p < 0.05). The ST morphology had a significant correlation with the anteroposterior skeletal pattern, microdontia, and tooth impaction as well (p < 0.05). The present results revealed a significant correlation of the ST morphology with the anteroposterior skeletal pattern, microdontia, and tooth impaction.

Comparison of shear bond strength of orthodontic color change adhesive with traditional adhesive.

INTRODUCTION: The purpose of this study was to compare the shear bond strength of color-change adhesive with a conventional light-cure adhesive at different debonding times. MATERIALS AND METHODS: Seventy-two intact extracted human permanent premolar teeth were used in this research. The brackets were bonded with Transbond XT (Group I) and Transbond Plus color change adhesive (Group II). Each of the two adhesive groups were then further divided into three subgroups of 12 specimens each, for a total of six subgroups. The subgroups represented the three different time points to be tested, 15 min, 24 h, and 1 week. Then, the shear bond strength (SBS) of the brackets was tested with a Universal Testing Machine. Adhesive remnant index (ARI) scores were calculated for each debonded teeth. RESULTS: Although Transbond XT yielded the lowest SBS values at 1 week, there was no significant difference between samples regarding shear bond at different times and ARI. CONCLUSION: The application of these adhesives did not affect bond strength. Both adhesives demonstrated acceptable bond strength to withstand orthodontic forces throughout the experiment.

Casein phosphopeptide- amorphous calcium phosphate effects on brackets shear bond strength and enamel damage.

BACKGROUND: The aim of study was to evaluate the application of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride regarding their effect on the shear bond strength (SBS), bond failure pattern of brackets using the adhesive remnant index (ARI) and assessing the quality of enamel surface using the enamel damage index (EDI). MATERIAL AND METHODS: Sixty extracted premolar teeth were randomly divided into four groups regarding pretreatment application of CPP-ACP and fluoride. Brackets were bonded using the conventional method. Specimens were thermocycled for 1000 cycles and were subsequently tested for the SBS in a universal testing machine. After debonding, the teeth were examined under a stereomicroscope to evaluate the ARI. Then, The EDI was assessed using a scanning electron microscope (SEM). Data were analyzed using ANOVA and the Chi-square test. RESULTS: Evaluation of SBS, ARI and EDI scores showed no significant difference among the study groups. However, a correlation was found between the ARI and EDI scores, indicating that with more adhesive remnants on enamel surface, enamel damage was lower. CONCLUSIONS: The use of CPP-ACP and fluoride can be considered a prophylactic application since these agents did not compromise bracket bond strength although they did not reduce iatrogenic damage to the enamel. Key words:CPP-ACP, Enamel damage, SEM, Shear bond strength, ARI.

Transected sciatic nerve repair by diode laser protein soldering.

BACKGROUND AND OBJECTIVE: Despite advances in microsurgical techniques, repair of peripheral nerve injuries (PNI) is still a major challenge in regenerative medicine. The standard treatment for PNI includes suturing and anasthomosis of the transected nerve. The objective of this study was to compare neurorraphy (nerve repair) using standard suturingto diode laser protein soldering on the functional recovery of transected sciatic nerves. STUDY DESIGN/MATERIALS AND METHODS: Thirty adult male Fischer-344 Wistar rats were randomly assigned to 3 groups: 1. The control group, no repair, 2. the standard of care suture group, and 3. The laser/protein solder group. For all three groups, the sciatic nerve was transected and the repair was done immediately. For the suture repair group, 10.0 prolene suture was used and for the laser/protein solder group a diode laser (500mW output power) in combination with bovine serum albumen and indocyanine green dye was used. Behavioral assessment by sciatic functional index was done on all rats biweekly. At 12weeks post-surgery, EMG recordings were done on all the rats and the rats were euthanized for histological evaluation of the sciatic nerves. The one-way ANOVA test was used for statistical analysis. RESULTS: The average time required to perform the surgery was significantly shorter for the laser-assisted nerve repair group compared to the suture group. The EMG evaluation revealed no difference between the two groups. Based on the sciatic function index the laser group was significantly better than the suture group after 12weeks (p<0.05). Histopathologic evaluation indicated that the epineurium recovery was better in the laser group (p<0.05). There was no difference in the inflammation between the suture and laser groups. CONCLUSION: Based on this evidence, laser/protein nerve soldering is a more efficient and efficacious method for repair of nerve injury compared to neurorraphy using standard suturing methods.

Comparison of Bond Strength of Metal and Ceramic Brackets Bonded with Conventional and High-Power LED Light Curing Units.

OBJECTIVES: The aim of this study was to evaluate the effect of conventional and high-power light emitting diode (LED) light curing units on shear bond strength (SBS) of metal and ceramic brackets to tooth surface. MATERIALS AND METHODS: Forty sound bovine maxillary central incisors were used for the study. The teeth were divided into four groups (n=10). Teeth surfaces were etched with 37% phosphoric acid for 20 seconds. After applying a uniform layer of adhesive primer on the etched enamel, composite was placed on the base of brackets. The samples were light cured according to the manufacturer's instructions and thermocycled. The SBS was measured. The failure mode was scored using the adhesive remnant index (ARI). RESULTS: The mean SBS of samples in groups A (high-power LED, metal bracket), B (high-power LED, ceramic bracket), C (conventional LED, metal bracket) and D (conventional LED, ceramic bracket) was 23.1±3.69, 10.7±2.06, 24.92±6.37 and 10.74±3.18MPa, respectively. The interaction effect of type of LED unit (high-power/conventional) and bracket type on SBS was not statistically significant (P=0.483). In general, type of LED unit did not affect SBS. Type of bracket significantly affected SBS (P<0.001). The ARI score was not significantly influenced by the interaction between the type of LED unit and bracket. CONCLUSIONS: The obtained SBS is the same for both bracket types by use of high-power and conventional LED light curing units. Regardless of the type of LED unit, SBS of ceramic brackets was significantly lower than that of metal brackets.

Unilateral Outer Bow Expanded Cervical Headgear Force System: 3D Analysis Using Finite Element Method.

OBJECTIVES: Headgears are among the effective orthodontic appliances to achieve treatment goals. Unilateral molar distal movement is sometimes needed during an orthodontic treatment, which can be achieved by an asymmetric headgear. Different unilateral headgears have been introduced. The main goal of this study was to analyze the force system of unilateral expanded outer bow asymmetric headgears by the finite element method (FEM). MATERIALS AND METHODS: Six 3D finite element models of a mesiodistal slice of the maxilla containing upper first molars, their periodontal ligaments (PDLs), cancellous bone, cortical bone, and a cervical headgear with expanded outer bow attached to maxillary first molars were designed in SolidWorks 2010 and meshed in ANSYS Workbench ver. 12.1. The models were the same except for the degree of outer bow expansion. The outer bow ends were loaded with 2 N force. The distal driving force and the net moment were evaluated. RESULTS: A decrease in the distalizing force in the normal side molar from 1.69 N to 1.37 N was shown by increasing the degree of unilateral expansion. At the same time, the force increased from 2.19 N to 2.49 N in the expanded side molar. A net moment increasing from 2.26 N.mm to 4.64 N.mm was also shown. CONCLUSION: Unilateral outer bow expansion can produce different distalizing forces in molars, which increase by increasing the expansion.