RESUMO
A simple, rapid and reliable gas-diffusion flow injection (GD-FI) method for ammonium determination in building materials has been developed. It is based on leaching ammonium from a ground solid sample into an alkaline solution with subsequent ammonia gas generation. Ammonia is then transported in a nitrogen stream to the GD cell of the FI system where it is absorbed into its acceptor solution containing a mixture of the acid-base indicators cresol red and thymol blue. The maximum increase in the absorbance of the acceptor solution at 580 nm is related to the ammonium concentration in the solid sample. The proposed method is characterized by a linear concentration range of 0.1-5.0 mg NH4(+) kg(-1), a limit of detection of 8 µg NH4(+) kg(-1) and a sample throughput of 10h(-1). A successful application of this method for the determination of ammonium in building materials such as concrete, cement and sand is reported.
RESUMO
Simple, rapid and fully automated methods for the manual and automated spectrophotometric determination of epinephrine have been developed by using schemes of stepwise injection (SWIA) and sequential injection analysis (SIA) implemented in the same manifold. The determination is based on the formation of reduced form of 18-molybdodiphosphate heteropoly anion by its reaction with epinephrine. Using of the reaction vessel in the general SWIA configuration instead of a holding and reaction coil in the SIA manifold provides several essential advantages, including higher sensitivity and lower reagent consumption. The linear dependence of the analytical signal on the epinephrine concentration was preserved over the range of 1.5-30, 3.0-30, and 1.5-25µmolL(-1) by using of SWIA, SIA and spectrophotometric analysis, respectively. The relative standard deviation for the SWIA determination of 10µmolL(-1) epinephrine was 1.8% (n=10).
