A case of ring chromosome 18 syndrome treated with a combined orthodontic-prosthodontic approach.

OBJECTIVE: The aim of this study was to report the case of a Japanese subject with ring chromosome 18 syndrome. A cephalometric analysis was performed, and the treatment procedure is described. DESIGN: Lateral and posteroanterior cephalograms were compared with Japanese norms. Dental anomalies were evaluated by a model analysis. The outcome of orthodontic-prosthodontic treatment was evaluated by comparing cephalograms during the course of treatment. RESULTS: The cephalometric analysis showed a reduction in the cranial base length and cranial width, midfacial depth, and height and width. Comparison of lateral cephalograms at age 16 years 6 months and 22 years 4 months showed late growth of the mandible. The model analysis showed that all of the teeth, except for the mandibular canine, were small. CONCLUSIONS: Characteristic craniofacial and dental anomalies were clarified. Successful oral rehabilitation was achieved by combined orthodontic-prosthodontic treatment.

Skeletal characteristics and treatment outcome of five patients with Robin sequence.

OBJECTIVE: To examine the variation in the precise skeletal characteristics and the treatment outcomes of five Japanese Robin sequence cases. MATERIALS AND METHODS: The birth histories and orthodontic records of five Japanese Robin sequence patients were collected and analyzed. RESULTS: All cases had a retrognathic appearance with small SNA and SNB angles. They had significantly steep mandibular planes with lingual tipped incisors in both arches. The gonial angles in two cases were within the Japanese norm, whereas the remaining three showed significantly enlarged angles. Moreover, all cases showed a significantly shorter ramus length, but the mandibular body was short in only two cases. All had moderate or severe crowding in both arches, and therefore extraction of lateral dentition or lateral incisors was performed in conjunction with orthodontic treatment. An edgewise multibracket appliance was placed, and labial tipping of the lower incisors was performed in all cases. All obtained normal functional occlusion after active treatment, but the retrognathic appearance remained in most cases. CONCLUSIONS: The present cases with Robin sequence showed variation in the gonial angle and mandibular body length, although all commonly exhibited smaller SNA and SNB angles with significantly steep mandibular planes. Significant labial tipping of the lower incisors was required during the active treatment, and all cases finally obtained functional occlusion, indicating the relatively good prognosis on the occlusion of this sequence.

Longitudinal dento-skeletal changes in UCLP patients following maxillary distraction osteogenesis using RED system.

Longitudinal dento-skeletal changes in unilateral cleft lip and palate (UCLP) patients following maxillary distraction osteogenesis using the rigid external distraction device (RED) were analyzed. Twelve Japanese non-syndromic UCLP patients who underwent maxillary distraction at the mean age of 16.4 years were used as subjects. Serial sets of lateral cephalograms, taken at 4 stages: 1) before osteotomy, 2) immediately after distraction, 3) 6 months and 4) 12 months post-osteotomy, were analyzed. Statistical analyses, including a paired t test, Pearson correlation analysis and stepwise linear regression analysis, were performed to distill characteristic dento-skeletal changes. In accordance with maxillary advancement, significant amounts of up-forward movement of the nasal bone, mandibular rotation and maxillary dental changes were observed. Maxillary dental changes were significantly related to the amount of mandibular rotation and force system of maxillary traction. Significant dento-skeletal relapse was found to occur during the 0-to-6-month follow-up period, but not in the 6-to-12-month follow-up period. Maxillary relapse was significantly related to the amount of maxillary advancement and severity of pre-surgical maxillary hypoplasia, while mandibular relapse was significantly related to maxillary dento-skeletal relapse. Successful clinical application of this procedure therefore requires consideration of both the surrounding dento-skeletal changes and the traction force system.

A case of oculo-facio-cardio-dental syndrome with integrated orthodontic-prosthodontic treatment.

OBJECTIVE: Oculo-facio-cardio-dental (OFCD) syndrome is a very rare condition that requires comprehensive dental management because of associated multiple dental anomalies such as canine radiculomegaly, delayed dentition, oligodontia, persistent primary teeth, microdontia, and macrodontia. This report presents a case of OFCD in a Japanese girl (13 years 1 month old). We analyzed cephalograms, panoramic roentgenograms, and dental casts and discuss our integrated orthodontic-prosthodontic treatment. DESIGN: The sizes of the tooth crown and root as well as lateral cephalograms were compared with those from a Japanese control group. The outcome of orthodontic treatment was evaluated by comparing cephalograms taken before and after treatment. RESULTS: Radiculomegaly was found not only in the upper and lower canines but also the upper central incisors and lower first premolars. Macrodontia was found in the upper central incisors, upper canines, lower canines, and lower first premolars. Microdontia was found in the upper lateral incisor. Lateral cephalometric analysis showed a remarkable hypoplastic midface in both the sagittal and vertical dimensions, coupled with a significantly decreased cranial base length and an increased gonial angle. Serial lateral cephalograms during orthodontic treatment from 13 to 23 years of age demonstrated only slight maxillary growth and significant downward mandibular growth with clockwise rotation in addition to pronounced labial tipping of the upper central incisors. CONCLUSIONS: Characteristic dental anomalies together with a unique craniofacial dysmorphology were clarified. Successful oral rehabilitation was achieved by integrated orthodontic-prosthodontic treatment.

Experimental tooth movement into bone induced by recombinant human bone morphogenetic protein-2.

OBJECTIVE: The development of biomaterials for secondary bone grafting to the alveolar cleft, recombinant human morphogenetic protein-2 (rhBMP-2) may have great potential to promote osseous regeneration. The purpose of this study was to investigate the osteoinductive activity of low-dose rhBMP-2 (10 microg/100 microL) and the biological response of newly generated bone to orthodontic stimulation, compared with previous results using high-dose rhBMP-2 (40 microg/100 microL). METHOD: After extraction of the maxillary first premolars, bone defects were surgically created in eight adult beagle dogs using a 5-mm-diameter trepan bar. The rhBMP-2 with a PLGA/gelatin sponge complex (PGS) made of gelatin and polylactic acid polyglycolic acid copolymer was immediately implanted. The osteoinductive activity of rhBMP-2 and tooth movement into the newly generated bone was evaluated based on histological and morphometric examination. RESULTS: Dramatic histological and morphometric differences were found in the time course of bone remodeling between low- and high-dose rhBMP-2. The onset of bone remodeling occurred significantly earlier in low-dose rhBMP-2. During experimental tooth movement, in contrast to high-dose rhBMP-2, with which root resorption occurred, only partial cementum resorption occurred on the pressure side with low-dose rhBMP-2. CONCLUSION: These results indicated that the proper dosage of rhBMP-2 should be determined for successful clinical application.

Relationship between transverse dental anomalies and skeletal asymmetry.

The recognition and elimination of dental compensation is essential in presurgical orthodontic treatment to achieve successful stabilization of the occlusion after surgery. However, the relationship between a transverse dental anomaly and skeletal asymmetry is not fully understood. To evaluate this relationship, frontal cephalometric and 3-dimensional dental model analyses were carried out on 44 adult Japanese Class III patients (mean age 21 years 11 months) who required surgical orthodontic treatment. The patients were divided into 2 groups: a facial asymmetry group in which the mandibular transverse deviation exceeded +/- 1 SD from the norm, and a control group in which the mandibular transverse deviation was within +/- 1 SD of the norm. Statistical comparison with a control group showed characteristic dental anomalies in the facial asymmetry group, including asymmetry of the curve of Spee, molar inclination, dental arch form, lateral overjet, and slanting of the occlusal plane. Stepwise linear regression analysis showed that transverse and vertical skeletal asymmetry variables including the mandible and the maxilla were effective parameters for characteristic dental anomaly variables, and a significant high correlation between dental anomalies and skeletal asymmetry was found.

A histological study on experimental tooth movement into bone induced by recombinant human bone morphogenetic protein-2 in beagle dogs.

OBJECTIVE: The purpose of this preliminary study was to examine experimental tooth movement into newly generated bone induced by recombinant human bone morphogenetic protein-2 (rhBMP-2). METHOD: After extraction of the maxillary first premolars, bone defects were surgically created in eight adult beagle dogs using a 5-mm-diameter trepan bar. According to which material was grafted into the bone defects, animals were divided into the following four groups: (1) the rhBMP-2 group in which rhBMP-2 with a poly[ D,L-(lactide-co-glycolide)]/gelatin sponge complex was implanted; (2) the spongiosa group in which spongiosa from the tibia was grafted; (3) the nongrafted group in which no material was embedded; and (4) the control group in which only tooth extraction was performed. The osteoinductive activity of rhBMP-2 and tooth movement into the newly generated bone were examined by histological and morphometric comparisons of each group. RESULTS: Considerable new bone formation was observed at the grafted site both in the rhBMP-2 and in the spongiosa groups. The area of generated bone in the rhBMP-2 group was significantly greater than that in the spongiosa group. Newly generated bone, in both the rhBMP-2 and spongisosa groups, showed a similar histological response to orthodontic force as in normal alveolar bone in the control group. However, root resorption occurred on the pressure side in the rhBMP-2 group. CONCLUSION: These results indicated that rhBMP-2 might constitute an alternative material to autogeneous bone grafting for alveolar cleft defects. Further studies regarding tooth movement into generated bone induced by rhBMP-2 are suggested.

Tooth eruption into the newly generated bone induced by recombinant human bone morphogenetic protein-2.

OBJECTIVE: The purpose of this study was to observe tooth eruption pattern into the newly generated bone induced by recombinant human bone morphogenetic protein-2 (rhBMP-2). METHOD: Three 12-week-old beagle dogs were used. Following wound healing of the extracted maxillary third deciduous incisor at the age of 13 weeks, a resection of maxillary alveolar bone (8 mm by 8 mm by 8 mm) was carried out, accompanied by extraction of the maxillary second incisor tooth germ. The rhBMP-2 (5 microgram/100 microL or 10 microgram/100 microL) was implanted in the resected area. A group that was not implanted after resection and a nonresected group were used as controls. Serial changes of the eruption pattern of the maxillary third incisor in the implanted area were observed radiographically. Oxytetracycline and calcein were employed as bone markers. Nine weeks after the implantation, the animals were sacrificed. The samples were observed histologically and analyzed using peripheral quantitative computerized tomography to acquire the bone mineral density (BMD). RESULTS: In the rhBMP-2 (5 microgram/100 microL)-treated group, histological findings and the BMD of the newly generated bone were almost same as in the nonresected group. The maxillary third incisor erupted through the implanted area. However, in the rhBMP-2 (10 microgram/100 microL)-treated group, more osteoinductive activity and significantly higher BMD were observed in the newly generated bone. The maxillary third incisor erupted mesially so as to avoid this implanted area. CONCLUSION: Results showed that bone remodeling and tooth eruption through the newly generated bone appear to be dose dependent. Accordingly, proper dosage of rhBMP-2 should be determined for successful clinical application.