Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
ACS Appl Mater Interfaces ; 14(35): 39976-39984, 2022 Sep 07.
Artigo em Inglês | MEDLINE | ID: mdl-36000715

RESUMO

Solar cells are essentially minority carrier devices, and it is therefore of central importance to understand the pertinent carrier transport processes. Here, we advanced a transport imaging technique to directly visualize the charge motion and collection in the direction of relevant carrier transport and to understand the cell operation and degradation in state-of-the-art cadmium telluride solar cells. We revealed complex carrier transport profiles in the inhomogeneous polycrystalline thin-film solar cell, with the influence of electric junction, interface, recombination, and material composition. The pristine cell showed a unique dual peak in the carrier transport light intensity decay profile, and the dual peak feature disappeared on a degraded cell after light and heat stressing in the lab. The experiments, together with device modeling, suggested that selenium diffusion plays an important role in carrier transport. The work opens a new forum by which to understand the carrier transport and bridge the gap between atomic/nanometer-scale chemical/structural and submicrometer optoelectronic knowledge.

2.
ACS Omega ; 7(28): 24353-24364, 2022 Jul 19.
Artigo em Inglês | MEDLINE | ID: mdl-35874259

RESUMO

The high cost of substrates for III-V growth can be cost limiting for technologies that require large semiconductor areas. Thus, being able to separate device layers and reuse the original substrate is highly desirable, but existing techniques to lift a film from a substrate have substantial drawbacks. This work discusses some of the complexities with the growth of a water-soluble, alkali halide salt thin film between a III-V substrate and overlayer. Much of the difficulty stems from the growth of GaAs on an actively decomposing NaCl surface at elevated temperatures. Interestingly, the presence of an in situ electron beam incident on the NaCl surface, prior to and during GaAs deposition, affects the crystallinity and morphology of the III-V overlayer. Here, we investigate a wide range of growth temperatures and the timing of the impinging flux of both elemental sources and high energy electrons at different points during the growth. We show that an assortment of morphologies (discrete islands, porous material, and fully dense layers with sharp interfaces) and crystallinity (amorphous, crystalline, and highly textured) occur depending on the specific growth conditions, driven largely by changes in GaAs nucleation which is greatly affected by the presence of the reflection high energy electron diffraction beam.

3.
Sci Rep ; 10(1): 2426, 2020 Feb 12.
Artigo em Inglês | MEDLINE | ID: mdl-32051449

RESUMO

A general problem for semiconductor applications is that very slow deposition on expensive single-crystal substrates yields high crystalline quality with excellent electro-optical properties, but at prohibitive costs and throughput for many applications. In contrast, rapid deposition on inexpensive substrates or nanocrystalline films yields low costs, but comparatively inferior crystallinity, carrier transport, and recombination. Here, we present methods to deposit single-crystal material at rates 2-3 orders of magnitude faster than state-of-the-art epitaxy with low-cost methods without compromising crystalline or electro-optical quality. For example, single-crystal CdTe and CdZnTe films that would take several days to grow by molecular-beam epitaxy are deposited in 8 minutes by close-spaced sublimation, yet retain the same crystalline quality measured by X-ray diffraction rocking curves. The fast deposition is coupled with effective n- and p-type in-situ doping by In, P, and As. The epitaxy can be extended to nanocrystalline substrates. For example, we recrystallize thin CdTe films on glass to deposit large grains with low defect density. The results provide new research paths for photovoltaics, detectors, infrared imaging, flexible electronics, and other applications.

4.
Adv Mater ; 29(3)2017 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-27862364

RESUMO

Using two-photon tomography, carrier lifetimes are mapped in polycrystalline CdTe photovoltaic devices. These 3D maps probe subsurface carrier dynamics that are inaccessible with traditional optical techniques. They reveal that CdCl2 treatment of CdTe solar cells suppresses nonradiative recombination and enhances carrier lifetimes throughout the film with substantial improvements particularly near subsurface grain boundaries and the critical buried p-n junction.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...