Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Appl Ergon ; 106: 103854, 2023 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-35973317

RESUMO

Measuring shoe-floor friction is critical for assessing the safety of footwear products. Portable devices for measuring coefficient of friction (COF) are needed. This study introduces such a device and evaluates its ability to predict human slip events across shoe designs. A portable device (18 kg) was utilized to measure 66 unique shoe-floor-fluid coefficients of friction (COF). Consistent with the shoes, flooring, and fluid contaminants from the COF tests, participants (n = 66) were unexpectedly exposed to the fluid while walking. Slip predictions were made based on a separate training data set. Slip predictions were made prospectively and using logistic regression analyses. The slip predictions were valid (p < 0.001), 91% sensitive, and 64% specific. The logistic regression fit also revealed that the COF values predicted slip outcomes (p = 0.006). This device is expected to expand the capacity of researchers, product developers, forensic engineers, and safety professionals to prevent slips and enhance human safety.


Assuntos
Pisos e Cobertura de Pisos , Sapatos , Humanos , Fricção , Caminhada
2.
Appl Ergon ; 82: 102959, 2020 Jan.
Artigo em Inglês | MEDLINE | ID: mdl-31568960

RESUMO

Available coefficient of friction (ACOF) is a common metric of footwear traction performance. ACOF is the ratio of friction to normal force, often averaged over a time-interval. The time-interval needed to achieve repeatable and valid ACOF is unknown. A post-hoc analysis was performed on nine shoe-floor-contaminant combinations to assess the repeatability and bias of data averaged across 4 time-intervals (2 ms, 50 ms, 100 ms, 200 ms) after the target normal force was reached. The ability to predict human slips was assessed for ACOF across these intervals. Differences in repeatability and validity across the four intervals were small. However, statistically significant differences were observed for the shortest compared with the longest interval (lower repeatability yet modestly improved predictive ability). Given the limited impact of time-interval on the results, a shorter interval of 50 ms is recommended to enable testing of smaller floor samples.


Assuntos
Pisos e Cobertura de Pisos , Sapatos , Acidentes por Quedas , Fenômenos Biomecânicos , Fricção , Humanos , Reprodutibilidade dos Testes , Propriedades de Superfície , Fatores de Tempo
3.
Appl Ergon ; 80: 35-42, 2019 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-31280808

RESUMO

Shoe wear is known to increase slipping risk, but few studies have systematically studied this relationship. This study investigated the impact of progressive shoe wear on the available coefficient of friction (ACOF) and under-shoe fluid dynamics. Five different slip-resistant shoes were progressively worn using an accelerated, abrasive, wear protocol. The ACOF and fluid forces (the load supported by the fluid) were measured as shoes were slipped across a surface contaminated with a diluted glycerol solution. As the shoes became worn, an initial increase in ACOF was followed by a steady decrease. Low fluid forces were observed prior to wear followed by increased fluid forces as the worn region became larger. Results suggest that traction performance decreases particularly when the heel region without tread exceeds a size of 800 mm2. This study supports the concept of developing shoe replacement guidelines based upon the size of the worn region to reduce occupational slips.


Assuntos
Acidentes por Quedas/prevenção & controle , Acidentes de Trabalho/prevenção & controle , Sapatos/efeitos adversos , Tração/efeitos adversos , Pisos e Cobertura de Pisos , Fricção , Humanos , Propriedades de Superfície
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...