From Classical to Advanced Use of Polymers in Food and Beverage Applications.

Polymers are extensively used in food and beverage packaging to shield against contaminants and external damage due to their barrier properties, protecting the goods inside and reducing waste. However, current trends in polymers for food, water, and beverage applications are moving forward into the design and preparation of advanced polymers, which can act as active packaging, bearing active ingredients in their formulation, or controlling the head-space composition to extend the shelf-life of the goods inside. In addition, polymers can serve as sensory polymers to detect and indicate the presence of target species, including contaminants of food quality indicators, or even to remove or separate target species for later quantification. Polymers are nowadays essential materials for both food safety and the extension of food shelf-life, which are key goals of the food industry, and the irruption of smart materials is opening new opportunities for going even further in these goals. This review describes the state of the art following the last 10 years of research within the field of food and beverage polymer's applications, covering present applications, perspectives, and concerns related to waste generation and the circular economy.

Segmented-Block Poly(ether amide)s Containing Flexible Polydisperse Polyethyleneoxide Sequences and Rigid Aromatic Amide Moieties.

We describe the synthesis and characterization of three novel aromatic diamines containing oxyethylene sequences of different lengths. These diamines were polymerized using the low-temperature solution polycondensation method with isophthaloyl chloride (IPC), terepthaloyl chloride (TPC), [1,1'-biphenyl]-4,4'-dicarbonyl dichloride (BDC), and 4,4'-oxybis(benzoyl chloride) (OBE), obtaining twelve poly(ether amide)s with short segments of polydisperse polyethyleneoxide (PEO) sequences in the polymer backbone. These polymers show reasonably high molecular mass materials (Mw > 12,000), and the relationship between their structure and properties has been carefully studied. Compared with conventional polyamides containing monodisperse PEO sequences, the polydispersity of the PEO segments within the structural units exerts a significant influence on the crystallinity, flexibility, solubility, and the thermal properties of the polymers. For instance, the all-para oriented polyamides (TPCP-A), with an average number of 8.2 ethylenoxide units per structural unit can be transformed conventionally (Tm = 259 °C) in comparison with thermally untransformable polymer with 2 ethylenoxide units (Tm = 425 °C).

Heteroaromatic Polyamides with Improved Thermal and Mechanical Properties.

We prepared high-performance aromatic copolyamides, containing bithiazole and thiazolo-thiazole groups in their main chain, from aromatic diamines and isophthaloyl chloride, to further improve the prominent thermal behavior and exceptional mechanical properties of commercial aramid fibers. The introduction of these groups leads to aramids with improved strength and moduli compared to commercial meta-oriented aromatic polyamides, together with an increase of their thermal performance. Moreover, their solubility, water uptake, and optical properties were evaluated in this work.

Polymer films containing chemically anchored diazonium salts with long-term stability as colorimetric sensors.

We have prepared polymeric films as easy-to-handle sensory materials for the colorimetric detection and quantification of phenol derivatives (phenols) in water. Phenols in water resources result from their presence in pesticides and fungicides, among other goods, and are harmful ecotoxins. Colorless polymeric films with pendant diazonium groups attached to the acrylic polymer structure were designed and prepared for use as sensory matrices to detect phenol-derived species in water. Upon dipping the sensory films into aqueous media, the material swells, and if phenols are present, they react with the diazonium groups of the polymer to render a highly colored azo group, giving rise to the recognition phenomenon. The color development can be visually followed for a qualitative determination of phenols. Additionally, quantitative analysis can be performed by two different techniques: a) by using a UV-vis spectrophotometer (limit of detection of 0.12 ppm for 2-phenylphenol) and/or b) by using a smartphone with subsequent RGB analysis (limit of detection of 30 ppb for 2-phenylphenol).

Solid polymer substrates and coated fibers containing 2,4,6-trinitrobenzene motifs as smart labels for the visual detection of biogenic amine vapors.

Attempts to polymerize trinitrobenzene derivatives (TNB) have been fruitless so far. Accordingly, polymers containing TNB have not been exploited in spite of their envisaged potential applications. Here, we describe two ways for preparing polymers with TNB moieties thus overcoming the previously reported polymerization impairments. We also report on the exploitation of the materials, both obtained as tractable transparent films and coated fibers, as smart labels for the visual detection of amine vapors. More precisely, amines in the atmosphere surrounding the sensory materials diffuse into them reacting with the TNB motifs forming highly colored Meisenheimer complexes, giving rise to development of color and to the naked eye sensing phenomenon. This is the case of highly volatile amines, such as trimethylamine, produced in food spoilage, specifically in the deterioration of fish or meat, for which the color development of the smart labels can be used as a visual test for food freshness.

Acrylic Polymers with Pendant Phenylboronic Acid Moieties as "Turn-Off" and "Turn-On" Fluorescence Solid Sensors for Detection of Dopamine, Glucose, and Fructose in Water.

We report herein a fluorescence polymer membrane as a film-shaped solid sensory kit for the detection and quantification in water of saccharides, namely, fructose and glucose, and dopamine. The sensory motifs are phenylboronic acids, which are chemically incorporated in the polymer network in the radically initiated bulk polymerization process. The sensory membrane is fluorescent. The interaction of the sensory motifs with dopamine "turn-off" the fluorescence due to a dynamic quenching, while stable complexes are formed with saccharides giving rise to a fluorescence "turn-on". The variation of the fluorescence intensity and the wavelength of the maxima permitted the titration of the species with a detection limit of 3-4 × 10-4 M. The hydrophilic membrane allowed for the detection in water in spite of the lack of solubility in this medium of the sensory phenylboronic acid derivative monomer.

Forced solid-state interactions for the selective "turn-on" fluorescence sensing of aluminum ions in water using a sensory polymer substrate.

Selective and sensitive solid sensory substrates for detecting Al(III) in pure water are reported. The material is a flexible polymer film that can be handled and exhibits gel behavior and membrane performance. The film features a chemically anchored salicylaldehyde benzoylhydrazone derivative as an aluminum ion fluorescence sensor. A novel procedure for measuring Al(III) at the ppb level using a single solution drop in 20 min was developed. In this procedure, a drop was allowed to enter the hydrophilic material for 15 min before a 5 min drying period. The process forced the Al(III) to interact with the sensory motifs within the membrane before measuring the fluorescence of the system. The limit of detection of Al(III) was 22 ppm. Furthermore, a water-soluble sensory polymer containing the same sensory motifs was developed with a limit of detection of Al(III) of 1.5 ppb, which was significantly lower than the Environmental Protection Agency recommendations for drinking water.

Selective and sensitive detection of aluminium ions in water via fluorescence "turn-on" with both solid and water soluble sensory polymer substrates.

A solid substrate comprised of a cross-linked polymer network is shaped as a film with gel-like behaviour and is used to detect aluminium ions in water; concurrently, a water soluble sensory polymer synthesised towards the same purpose is also discussed. The detection in both systems was achieved via fluorescence "turn-on". The limits of detection for Al(III) were 1.6 and 25ppb for the former and latter materials, respectively; these levels are significantly lower than the EPA recommendations for drinking water.

Methacrylate copolymers with pendant piperazinedione-sensing motifs as fluorescent chemosensory materials for the detection of Cr(VI) in aqueous media.

A fluorogenic sensory film, or dense membrane, capable of detecting Cr(VI), Fe(III), and Hg(II) in water was prepared. The film was prepared by a bulk radical polymerization of different comonomers, one of which contained a piperazinedione motif as sensory fluorophore. The film exhibited gel-like behavior and was highly tractable, even after being swollen in water. The sensing conditions were chosen to overcome interference from iron and mercury cations, giving rise to a material with a detection limit of 1 ppb for Cr(VI).

Structural NMR and ab initio study of salicylhydroxamic and p-hydroxybenzohydroxamic acids: evidence for an extended aggregation.

The acid-base behavior and self-aggregation of salicylhydroxamic (SHA) and p-hydroxybenzohydroxamic acids (PHBHA)have been investigated by UV and 1HNMR spectroscopy, respectively. The acid-base parameters, measured in H2O at 25 degrees C and I=0.1 M, were pK1=7.56, pK2=9.85 for SHA and pK1=8.4, pK2=9.4 for PHBHA. The 1H NMR signals for salicylhydroxamic and p-hydroxybenzohydroxamic acids measured in acetone indicate that both acids self-aggregate according to a mechanism where two monomers produce planar E-E dimers stabilized by horizontal H-bonds. Further dimer aggregation yields sandwich-like tetramer structures stabilized by vertical H-bonds and pi-pi interactions. The p-hydroxybenzohydroxamic tetramers, less stable than those of salicylhydroxamic, contain two water molecules in their structures. The gas-phase structures of salicylhydroxamic acid and its anions were investigated by ab initio calculations using the density functional theory at the B3LYP/AUG-cc-pVDZ level. The SHA most stable gas-phase conformer is the A-Z amide, a structure with all three phenolate (OP), carboxylate (OC), and hydroxamate (OH) oxygen atoms in the cis position. The B-Z amide, with the OP oxygen trans to OC, lies 5.4 kcal above the A-Z amide. The most stable monoanion is the N-deprotonated A-Z amide.

1H NMR direct observation of enantiomeric exchange in palladium(II) and platinum(II) complexes containing N,N' bidentate aryl-pyridin-2-ylmethyl-amine ligands.

The complexes [MCl(2)(kappa2-N approximately N')] (N approximately N' = 2-C(5)H(4)N-CH2-NHAr; Ar = 4-MeC(6)H(4), a; 2,6-Me(2)C(6)H(3), b; 4-MeOC(6)H(4), c; 4-CF(3)C(6)H(4), d; M = Pd, 1a-d; Pt, 2a-d) have been prepared and fully stereochemically characterized both in the solid state and in solution. Their behavior in DMSO-d6 solution is dependent on the substituents of the aryl group and on the metal. Complexes of palladium with substituents at the para position (1a, 1c, 1d) display a dynamic 1H NMR pattern when the solutions are heated. An enantiomeric exchange Slambda/Rdelta is suggested to explain such behavior. On the basis of the calculated negative DeltaS values, an associative mechanism involving the solvent is proposed. Under the same conditions, analogous complexes of platinum (2a, 2c, 2d) proved to be unstable, and release of the N approximately N' ligand was observed. Complexes 1b and 2b show temperature-variable 1H NMR spectra without any evidence accounting for enantiomeric exchange or decoordination. DFT calculations on models of 1a and 1b show that diastereomeric exchange Sdelta/Slambda is a process where the complex with the higher sterical hindrance, 1b, has a lower energy barrier.

Diastereospecific and diastereoselective syntheses of Ruthenium(II) complexes using N,N' bidentate ligands aryl-pyridin-2-ylmethyl-amine ArNH-CH2-2-C5H4N and their oxidation to imine ligands.

Coordination of N,N' bidentate ligands aryl-pyridin-2-ylmethyl-amine ArNH-CH2-2-C5H4N 1 (Ar = 4-CH3-C6H4, 1a; 4-CH3O-C6H4, 1b; 2,6-(CH3)2-C6H3, 1c; 4-CF3-C6H4, 1d) to the moieties [Ru(bipy)2]2+, [Ru(eta5-C5H5)L]+ (L = CH3CN, CO), or [Ru(eta6-arene)Cl]2+ (arene = benzene, p-cymene) occurs under diastereoselective or diastereospecific conditions. Detailed stereochemical analysis of the new complexes is included. The coordination of these secondary amine ligands activates their oxidation to imines by molecular oxygen in a base-catalyzed reaction and hydrogen peroxide was detected as byproduct. The amine-to-imine oxidation was also observed under the experimental conditions of cyclic voltammetry measurements. Deprotonation of the coordinated amine ligands afforded isolatable amido complexes only for the ligand (1-methyl-1-pyridin-2-yl-ethyl)-p-tolyl-amine, 1e, which doesn't contain hydrogen atoms in a beta position relative to the N-H bond. The structures of [Ru(2,2'-bipyridine)2(1b)](PF6)2, 2b; [Ru(2,2'-bipyridine)(2)(1c)](PF6)2, 2c; trans-[RuCl2(COD)(1a)], 3; and [RuCl2(eta6-C6H6)(1a)]PF6, 4a, have been confirmed by X-ray diffraction studies.

Diagnóstico computacional en psiquiatría. Estudio comparativo en un departamento / Computational diagnosis in psychiatry. Comparative study in one department

Se realizó el diagnóstico clínico y computacional de 64 pacientes psiquiátricos, con intención de comprobar la aplicabilidad de un sistema semiautomatizado. El algoritmo fue desarrollado sobre la base del sistema Diax y programado en lenguaje focal. El cuestionario se aplicó en las condiciones clínicas habituales. El acuerdo entre el diagnóstico clínico y Diax, en 13 categorías diagnósticas, fue ligeramente inferior a la concordancia interpsiquiatras. El algoritmo discriminó en el 100 por ciento los casos de "esquizofrenia" de los "desórdenes afectivos". La discriminación de cuatro dígitos intragrupos fue del 75 por ciento. Los resultados obtenidos son estimulantes para realizar nuevas investigaciones en este campo(AU)