Effects of biochar types on seed germination, growth, chlorophyll contents, grain yield, sodium, and potassium uptake by wheat (Triticum aestivum L.) under salt stress.

Soil salinity is a significant challenge in agriculture, particularly in arid and semi-arid regions such as Pakistan, leading to soil degradation and reduced crop yields. The present study assessed the impact of different salinity levels (0, 25, and 50 mmol NaCl) and biochar treatments (control, wheat-straw biochar, rice-husk biochar, and sawdust biochar applied @ 1% w/w) on the germination and growth performance of wheat. Two experiments: a germination study and a pot experiment (grown up to maturity), were performed. The results showed that NaCl-stress negatively impacted the germination parameters, grain, and straw yield, and agronomic and soil parameters. Biochar treatments restored these parameters compared to control (no biochar), but the effects were inconsistent across NaCl levels. Among the different biochars, wheat-straw biochar performed better than rice-husk and sawdust-derived biochar regarding germination and agronomic parameters. Biochar application notably increased soil pHs and electrical conductivity (ECe). Imposing NaCl stress reduced K concentrations in the wheat shoot and grains with concomitant higher Na concentrations in both parts. Parameters like foliar chlorophyll content (a, b, and total), stomatal and sub-stomatal conductance, and transpiration rate were also positively influenced by biochar addition. The study confirmed that biochar, particularly wheat-straw biochar, effectively mitigated the adverse effects of soil salinity, enhancing both soil quality and wheat growth. The study highlighted that biochar application can minimize the negative effects of salinity stress on wheat. Specifically, the types and dosages of biochar have to be optimized for different salinity levels under field conditions.

Effect of pharmaceutical promotion and incentives offered by pharmaceutical companies on the prescribing pattern of medical students: a cross-sectional study from a developing nation Pakistan.

Background: Pharmaceutical companies continuously pursue healthcare professionals, starting from the medical college level, which can ultimately lead to irrational prescribing of drugs and antibiotics. Therefore, our main aim was to evaluate the opinions and attitudes of medical students toward pharmaceutical promotion. Methods: This study utilized a cross-sectional online survey that applied the snowball sampling technique. Data were collected from three public and three private sector medical colleges in Punjab, Pakistan using snowball sampling. A modified version of a pre-structured questionnaire was used to collect data between October 2020 and January 2021. Medical students from the third year onward were captivated. The tool was made available on Google Forms and students could access it by clicking the link shared. The effect of promotion on prescribing pattern and future prescribing of antibiotics were measured. Descriptive statistics, chi-square, and t-test were used to analyze the data. Results: A total of 1,301 students filled out the survey, but only 1,227 responses were acceptable. The average age was found to be 23.4 ± 1.59 years. Slightly more than half of the respondents were male participants (57.7%), and a significant proportion (84.1%) reported being aware of pharmaceutical promotion. A smaller number (27.7%) felt that physicians who meet medical representatives more frequently tend to prescribe more antibiotics and 46.3% indicated they would be willing to prescribe antibiotics under the promotional influence. Medical students who were male, in senior college years, attended government institutions, and had lower parental income showed significantly higher perception and attitude scores (p < 0.05) which, in turn, may show their inclination to promotional activities. Many students agreed with the view that pharmaceutical promotion (PP) activities may alter prescribing practices and also believed that they contribute to the increased irrational prescribing of drugs and antibiotics. Conclusion: The study revealed that only a small number of students are willing to engage in promotional activities and accept rewards, which influences their choice toward selection of drugs and antibiotics. This study highlighted the necessity of giving proper educational instructions regarding the promotion of drugs to medical students. This study also focused on the educational prerequisites of the students.

Agricultural waste-based modified biochars differentially affected the soil properties, growth, and nutrient accumulation by maize (Zea mays L.) plants.

Biochar (BC) is an organic compound formed by the pyrolysis of organic wastes. Application of BCs as soil amendments has many benefits including carbon sequestration, enhanced soil fertility and sustainable agriculture production. In the present study, we acidified the different BCs prepared from rice straw, rice husk, wheat straw, cotton stalk, poultry manure, sugarcane press mud and vegetable waste; following which, we applied them in a series of pot experiments. Comparisons were made between acidified and non- acidified BCs for their effects on seed germination, soil properties (EC, pH) nutrient contents (P, K, Na) and organic matter. The treatments comprised of a control, and all above-described BCs (acidified as well as non-acidified) applied to soil at the rate of 1% (w/w). The maize crop was selected as a test crop. The results showed that acidified poultry manure BC significantly improved germination percentage, shoot length, and biomass of maize seedlings as compared to other BCs and their respective control plants. However, acidified BCs caused a significant decrease in nutrient contents (P, K, Na) of soil,maize seedlings, and the soil organic matter contents as compared to non- acidified BCs. But when compared with control treatments, all BCs treatments (acidified and non-acidified) delivered higher levels of nutrients and organic matter contents. It was concluded that none of the BCs (acidified and non-acidified) had caused negative effect on soil conditions and growth of maize. In addition, the acidification of BC prior to its application to alkaline soils might had altered soil chemistry and delivered better maize growth. Moving forward, more research is needed to understand the long-term effects of modified BCs on nutrient dynamics in different soils. In addition, the possible effects of BC application timings, application rates, particle size, and crop species have to be evaluated systemtically.

Microbial detoxification of chlorpyrifos, profenofos, monocrotophos, and dimethoate by a multifaceted rhizospheric Bacillus cereus strain PM38 and its potential for the growth promotion in cotton.

Bacillus genera, especially among rhizobacteria, are known for their ability to promote plant growth and their effectiveness in alleviating several stress conditions. This study aimed to utilize indigenous Bacillus cereus PM38 to degrade four organophosphate pesticides (OPs) such as chlorpyrifos (CP), profenofos (PF), monocrotophos (MCP), and dimethoate (DMT) to mitigate the adverse effects of these pesticides on cotton crop growth. Strain PM38 exhibited distinct characteristics that set it apart from other Bacillus species. These include the production of extracellular enzymes, hydrogen cyanide, exopolysaccharides, Indol-3-acetic acid (166.8 µg/mL), siderophores (47.3 µg/mL), 1-aminocyclopropane-1-carboxylate deaminase activity (32.4 µg/mL), and phosphorus solubilization (162.9 µg/mL), all observed at higher concentrations. This strain has also shown tolerance to salinity (1200 mM), drought (20% PEG-6000), and copper and cadmium (1200 mg/L). The amplification of multi-stress-responsive genes, such as acdS, ituC, czcD, nifH, sfp, and pqqE, further confirmed the plant growth regulation and abiotic stress tolerance capability in strain PM38. Following the high-performance liquid chromatography (HPLC) analysis, the results showed striking compatibility with the first kinetic model. Strain PM38 efficiently degraded CP (98.4%), PF (99.7%), MCP (100%), and DMT (95.5%) at a concentration of 300 ppm over 48 h at 35 °C under optimum pH conditions, showing high coefficients of determination (R2) of 0.974, 0.967, 0.992, and 0.972, respectively. The Fourier transform infrared spectroscopy (FTIR) analysis and the presence of opd, mpd, and opdA genes in the strain PM38 further supported the potential to degrade OPs. In addition, inoculating cotton seedlings with PM38 improved root length under stressful conditions. Inoculation of strain PM38 reduces stress by minimizing proline, thiobarbituric acid-reactive compounds, and electrolyte leakage. The strain PM38 has the potential to be a good multi-stress-tolerant option for a biological pest control agent capable of improving global food security and managing contaminated sites.

Recent Advances in Non-Ti MXenes: Synthesis, Properties, and Novel Applications.

One of the most fascinating 2D nanomaterials (NMs) ever found is various members of MXene family. Among them, the titanium-based MXenes, with more than 70% of publication-related investigations, are comparatively well studied, producing fundamental foundation for the 2D MXene family members with flexible properties, familiar with a variety of advanced novel technological applications. Nonetheless, there are still more candidates among transitional metals (TMs) that can function as MXene NMs in ways that go well beyond those that are now recognized. Systematized details of the preparations, characteristics, limitations, significant discoveries, and uses of the novel M-based MXenes (M-MXenes), where M stands for non-Ti TMs (M = Sc, V, Cr, Y, Zr, Nb, Mo, Hf, Ta, W, and Lu), are given. The exceptional qualities of the 2D non-Ti MXene outperform standard Ti-MXene in several applications. There is many advancement in top-down as well as bottom-up production of MXenes family members, which allows for exact control of the M-characteristics MXene NMs to contain cutting-edge applications. This study offers a systematic evaluation of existing research, covering everything in producing complex M-MXenes from primary limitations to the characterization and selection of their applications in accordance with their novel features. The development of double metal combinations, extension of additional metal candidates beyond group-(III-VI)B family, and subsequent development of the 2D TM carbide/TMs nitride/TM carbonitrides to 2D metal boride family are also included in this overview. The possibilities and further recommendations for the way of non-Ti MXene NMs are in the synthesis of NMs will discuss in detail in this critical evaluation.

The recent advances in the approach of artificial intelligence (AI) towards drug discovery.

Artificial intelligence (AI) has recently emerged as a unique developmental influence that is playing an important role in the development of medicine. The AI medium is showing the potential in unprecedented advancements in truth and efficiency. The intersection of AI has the potential to revolutionize drug discovery. However, AI also has limitations and experts should be aware of these data access and ethical issues. The use of AI techniques for drug discovery applications has increased considerably over the past few years, including combinatorial QSAR and QSPR, virtual screening, and denovo drug design. The purpose of this survey is to give a general overview of drug discovery based on artificial intelligence, and associated applications. We also highlighted the gaps present in the traditional method for drug designing. In addition, potential strategies and approaches to overcome current challenges are discussed to address the constraints of AI within this field. We hope that this survey plays a comprehensive role in understanding the potential of AI in drug discovery.

Angiogenic protein profiling, phytochemical screening and in silico anti-cancer targets validation of stem, leaves, fruit, and seeds of Calotropis procera in human liver and breast cancer cell lines.

The main focus of anticancer drug discovery is on developing medications that are gentle on normal cells and should have the ability to target multiple anti-cancer pathways. Liver cancer is becoming a worldwide epidemic due to the highest occurring and reoccurring rate in some countries. Calotropis procera is a xerophytic herbal plant growing wildly in Saudi Arabia. Due to its anti-angiogenic and anticancer capabilities, "C. procera" is a viable option for developing innovative anticancer medicines. However, no study has been done previously, to discover angiogenic and anti-cancer targets which are regulated by C. procera in liver cancer. In this study, leaves, stems, flowers, and seeds of C. procera were used to prepare crude extracts and were fractionated into four solvents of diverse polarities. These bioactivity-guided solvent fractions helped to identify useful compounds with minimal side effects. The phytoconstituents present in the leaves and stem were identified by GC-MS. In silico studies were done to predict the anti-cancer targets by major bioactive constituents present in leaves and stem extracts. A human angiogenesis antibody array was performed to profile novel angiogenic targets. The results from this study showed that C. procera extracts are an ideal anti-cancer remedy with minimum toxicity to normal cells as revealed by zebrafish in vivo toxicity screening assays. The novel antiangiogenic and anticancer targets identified in this study could be explored to design medication against liver cancer.

Beyond the ordinary: exploring the synergistic effect of iodine and nickel doping in cobalt hydroxide for superior energy storage applications.

This study explores the iodine and nickel-doped cobalt hydroxide (I & Ni-co-doped-Co(OH)2) as a potential material for energy storage and conversion applications owing to its excellent electrochemical characteristics. According to our analysis, it was revealed that this material exhibits pseudocapacitive-like behavior, as evident from distinct redox peaks observed in cyclic voltammetry, which confirms its ability to store charges. The diffusion coefficient analysis reveals that this material possesses conductivity and rapid diffusion kinetics, making it particularly advantageous compared to materials synthesized in previous studies. Charge-discharge measurements were performed to analyze the charge storage capacity and stability of this material after 3000 consecutive cycles, showing its excellent stability with minimum loss of capacitance. Furthermore, its anodic and cathodic linear sweep voltammetry curves were measured to evaluate its oxygen evolution and hydrogen evolution reaction performance. The results showed that the material exhibited an excellent water splitting performance, which suggests its potential practical application for hydrogen production. This increased activity was attributed to the doping of α-Co(OH)2, which improved its structural stability, electrical conductivity, and charge transfer efficiency. Thus, I & Ni-co-doped-Co(OH)2 possesses enhanced properties that make it an excellent material for both energy storage and hydrogen generation applications.

Deciphering the mechanistic role of Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) in bio-sorption and phyto-assimilation of Cadmium via Linum usitatissimum L. Seedlings.

Three Cd2+ resistant bacterium's minimal inhibition concentrations were assessed and their percentages of Cd2+ accumulation were determined by measurements using an atomic absorption spectrophotometer (AAS). The results revealed that two isolates Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52), identified by 16S rDNA gene sequencing, showed a higher percentage of Cd2+ accumulation i.e., 83.78% and 81.79%, respectively. Moreover, both novel strains can tolerate Cd2+ levels up to 2000 mg/L isolated from district Chakwal. Amplification of the czcD, nifH, and acdS genes was also performed. Batch bio-sorption studies revealed that at pH 7.0, 1 g/L of biomass, and an initial 150 mg/L Cd2+ concentration were the ideal bio-sorption conditions for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52). The experimental data were fit to Langmuir isotherm measurements and Freundlich isotherm model R2 values of 0.999 for each of these strains. Bio sorption processes showed pseudo-second-order kinetics. The intra-diffusion model showed Xi values for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) of 2.26 and 2.23, respectively. Different surface ligands, was investigated through Fourier-transformation infrared spectroscopy (FTIR). The scanning electron microscope SEM images revealed that after Cd2+ adsorption, the cells of both strains became thick, adherent, and deformed. Additionally, both enhanced Linum usitatissimum plant seed germination under varied concentrations of Cd2+ (0 mg/L, 250 mg/L,350 mg/L, and 500 mg/L). Current findings suggest that the selected strains can be used as a sustainable part of bioremediation techniques.

Three-dimensional bimodal pore-rich G/MXene sponge amalgamated with vanadium diselenide nanosheets as a high-performance electrode for electrochemical water-oxidation/reduction reactions.

Exploring new strategies to design non-precious and efficient electrocatalysts can provide a solution for sluggish electrocatalytic kinetics and sustainable hydrogen energy. Transition metal selenides are potential contenders for bifunctional electrocatalysis owing to their unique layered structure, low band gap, and high intrinsic activities. However, insufficient access to active sites, lethargic water dissociation, and structural degradation of active materials during electrochemical reactions limit their activities, especially in alkaline media. In this article, we report a useful strategy to assemble vanadium diselenide (VSe2) into a 3D MXene/rGO-based sponge-like architecture (VSe2@G/MXe) using hydrothermal and freeze-drying approaches. The 3D hierarchical meso/macro-pore rich sponge-like morphology not only prevents aggregation of VSe2 nanosheets but also offers a kinetics-favorable framework and high robustness to the electrocatalyst. Synergistic coupling of VSe2 and a MXene/rGO matrix yields a heterostructure with a large specific surface area, high conductivity, and multi-dimensional anisotropic pore channels for uninterrupted mass transport and gas diffusion. Consequently, VSe2@G/MXe presented superior electrochemical activity for both the HER and OER compared to its counterparts (VSe2 and VSe2@G), in alkaline media. The overpotentials required to reach a cathodic and anodic current density of 10 mA cm-2 were 153 mV (Tafel slope = 84 mV dec-1) and 241 mV (Tafel slope = 87 mV dec-1), respectively. The Rct values at the open circuit voltage were as low as 9.1 Ω and 1.41 Ω for the HER and OER activity, respectively. Importantly, VSe2@G/MXe withstands a steady current output for a long 24 h operating time. Hence, this work presents a rational design for 3D microstructures with optimum characteristics for efficient bifunctional alkaline water-splitting.

Evolution and advancements in genomics and epigenomics in OA research: How far we have come.

OBJECTIVE: Osteoarthritis (OA) is the most prevalent musculoskeletal disease affecting articulating joint tissues, resulting in local and systemic changes that contribute to increased pain and reduced function. Diverse technological advancements have culminated in the advent of high throughput "omic" technologies, enabling identification of comprehensive changes in molecular mediators associated with the disease. Amongst these technologies, genomics and epigenomics - including methylomics and miRNomics, have emerged as important tools to aid our biological understanding of disease. DESIGN: In this narrative review, we selected articles discussing advancements and applications of these technologies to OA biology and pathology. We discuss how genomics, deoxyribonucleic acid (DNA) methylomics, and miRNomics have uncovered disease-related molecular markers in the local and systemic tissues or fluids of OA patients. RESULTS: Genomics investigations into the genetic links of OA, including using genome-wide association studies, have evolved to identify 100+ genetic susceptibility markers of OA. Epigenomic investigations of gene methylation status have identified the importance of methylation to OA-related catabolic gene expression. Furthermore, miRNomic studies have identified key microRNA signatures in various tissues and fluids related to OA disease. CONCLUSIONS: Sharing of standardized, well-annotated omic datasets in curated repositories will be key to enhancing statistical power to detect smaller and targetable changes in the biological signatures underlying OA pathogenesis. Additionally, continued technological developments and analysis methods, including using computational molecular and regulatory networks, are likely to facilitate improved detection of disease-relevant targets, in-turn, supporting precision medicine approaches and new treatment strategies for OA.

Multiple-Drug Resistant Shiga Toxin-Producing E. coli in Raw Milk of Dairy Bovine.

INTRODUCTION: Raw milk may contain pathogenic microorganisms harmful to humans, e.g., multidrug-resistant Escherichia coli non-O157:H7, which can cause severe colitis, hemolytic uremia, and meningitis in children. No studies are available on the prevalence of Shiga toxin-producing E. coli (STEC O157:H7) in sick or healthy dairy animals in the Khyber Pakhtunkhwa Province of Pakistan. AIM: This study aimed to isolate, characterize, and detect antibiotic resistance in STEC non-O157:H7 from unpasteurized milk of dairy bovines in this province. MATERIALS AND METHODS: We collected raw milk samples (n = 800) from dairy farms, street vendors, and milk shops from different parts of the Khyber Pakhtunkhwa Province. E. coli was isolated from these samples followed by latex agglutination tests for serotyping. The detection of STEC was conducted phenotypically and confirmed by the detection of virulence genes genotypically. An antibiogram of STEC isolates was performed against 12 antibiotics using the disc diffusion method. RESULTS: A total of 321 (40.12%) samples were found to be positive for E. coli in this study. These samples were processed for the presence of four virulence genes (Stx1, Stx2, ehxA, eae). Forty samples (5.0%) were STEC-positive. Of these, 38%, 25%, 19%, and 18% were positive for Stx1, Stx2, ehxA, and eae, respectively. Genotypically, we found that 1.37% of STEC isolates produced extended-spectrum beta-lactamase (ESBL) and contained the blaCTX M gene. Resistance to various antibiotics ranged from 18% to 77%. CONCLUSION: This study highlights the risk of virulent and multidrug-resistant STEC non-O157:H7 in raw milk and the need for proper quality surveillance and assurance plans to mitigate the potential public health threat.

Bacillus safensis filtrate-based ZnO nanoparticles control black heart rot disease of apricot fruits by maintaining its soluble sugars and carotenoids.

Black heart rot is a serious disease of apricot and it has been reported to be caused by Alternaria solani, around the world. The present research was designed to control this disastrous disease using zinc oxide nanoparticles (b-ZnO NPs). These NPs were synthesized in the filtrate of a useful bacterium (Bacillus safensis) and applied to control black heart rot of apricot. After synthesis, the reduction of b-ZnO NPs was confirmed by UV-visible spectroscopy, at 330 nm. Fourier transform infrared (FTIR) spectra ensured the presence of multiple functional groups (alcohols, phenols, carboxylic acids, nitro compounds and amines) on the surface of b-ZnO NPs. X-Ray diffraction (XRD) analysis elucidated their average size (18 nm) while scanning electron microscopy (SEM) micrograph described the spherical shape of b-ZnO NPs. The synthesized b-ZnO NPs were applied in four different concentrations (0.25 mg/ml, 0.50 mg/ml, 0.75 mg/ml, 1.0 mg/ml) under both in vitro and in vivo conditions. These NPs were very efficient in inhibiting mycelial growth (85.1%) of A. solani at 0.75 mg/ml concentration of NPs, in vitro. Same concentration also performed best, in vivo, and significantly reduced disease incidence (by 67%) on self-inoculated apricot fruit. Apart from this, application of b-ZnO NPs helped apricot fruit to maintain its quality under fungal-stress conditions. The decay of apricot fruit was reduced and they maintained greater firmness and higher weight. Moreover, b-ZnO NPs treated fruits controlled black heart rot disease by maintaining higher contents of ascorbic acid, soluble sugars and carotenoids. These b-ZnO NPs were produced in powder form for their easy carriage to the farmers' fields.

Assessment of the Implementation of Pakistan's National Action Plan on Antimicrobial Resistance in the Agriculture and Food Sectors.

The agriculture and food (agrifood) sectors play key roles in the emergence, spread, and containment of antimicrobial resistance (AMR). Pakistan's first National Action Plan (NAP) on AMR was developed to guide One Health interventions to combat AMR through 2017-2022. To improve subsequent iterations, we assessed the implementation of Pakistan's NAP in the agrifood sectors (NAPag) in October 2022, using the Progressive Management Pathway on AMR tool developed by the Food and Agriculture Organization of the United Nations (FAO). The assessment tool addressed four crucial focus areas of the NAPag: governance, awareness, evidence, and practices. Each focus area contains multiple topics, which involve four sequential stages of activities to progressively achieve systematic management of AMR risk in the agrifood sectors. High-level representatives of the NAPag stakeholders provided information for the assessment through pre-event documentary review and workshop discussions. The assessment results showed that Pakistan's NAPag had an overall moderate coverage (59%) of the anticipated activities. Gaps were particularly notable in strengthening governance, good practices, and interventions in non-livestock sectors. Furthermore, only 12% of the evaluated activities were fully executed and documented, consistently remaining at the planning and piloting stages in the livestock sector across all the examined topics. Insufficient attention to non-livestock sectors, inadequate regulation and enforcement capacity, and resource constraints have hindered scalable and sustainable interventions under the current plan. This assessment provides valuable insights to strengthen the inclusiveness and contribution of the agrifood sectors in the next NAP iteration. In the short-to-medium term, strategic prioritization is necessary to optimize the use of limited resources and target the most critical gaps, such as improving awareness among key stakeholders and fortifying regulations for prudent antimicrobial use. In the long term, integration of AMR into the country's broader health, development, and agricultural transformation agendas will be needed to generate sustainable benefits.

Retraction: Molecular Characterization and Antibiotic Susceptibility Pattern of Bacterial Strains Isolated From Wound of Patients With Diabetes.

[This retracts the article DOI: 10.7759/cureus.47681.].

Development of low-cost and high-efficiency solar modules based on perovskite solar cells for large-scale applications.

Solar energy has emerged as a viable and competitive renewable resource due to its abundance and cost-effectiveness. To meet the global energy demands, there is a growing need for efficient devices with unique compositions. In this study, we designed and analyzed a perovskite solar cell (PSC) incorporating methylammonium tin iodide (CH3NH3SnI3) as the active optical absorber material, tin iodide (SnO2) as the electron transport layer (ETL), and copper thiocyanate (CuSCN) as the hole transport layer (HTL) using SCAPS-1D software for numerical investigations. Subsequently, the optimized outcomes were implemented in the PVSyst software package to derive the characteristics of a solar module based on the proposed novel solar cell composition. The objective of our research was to enhance the stability of solar cell for use in solar module. This was achieved by optimizing the thicknesses of the compositional layers which resulted in the enhancement of excess electron and hole mobilities and a reduction in defect densities, thereby leading to an improvement in the device performance. The optimization of excess electron and hole mobilities, as well as defect densities, was conducted to improve the device performance. SCAPS calculations indicated that the perovskite absorber layer (CH3NH3SnI3) may achieve the best possible performance with a maximum optimized thickness of 3.2 µm. The optimized thickness value for CuSCN-HTL and SnO2-ETL were found to be 0.07 µm and 0.05 µm respectively resulting in a maximum power conversion efficiency (PCE) of 23.57%. Variations in open circuit voltage (Voc), short circuit current (Jsc), fill factor (FF %), and quantum efficiency (QE) associated with the optimized thickness values of all layers in the ITO/SnO2/CH3NH3SnI3/CuSCN/Mo composition were critically analyzed. The use of these input parameters resulted in power creation of 557.4 W for a module consisting of 72 cells with an annual performance ratio of 80.3%. These recent investigations are expected to be effective in the design and fabrication of eco-friendly and high-performance solar cells in terms of efficiency.

Identification and expression analysis of SBP-Box-like (SPL) gene family disclose their contribution to abiotic stress and flower budding in pigeon pea (Cajanus cajan).

The SPL gene family (for Squamosa Promoter-binding like Proteins) represents specific transcription factors that have significant roles in abiotic stress tolerance, development and the growth processes of different plants, including initiation of the leaf, branching and development of shoot and fruits. The SPL gene family has been studied in different plant species; however, its role is not yet fully explored in pigeon pea (Cajanus cajan ). In the present study, 11 members of the CcSPL gene family were identified in C. cajan . The identified SPLs were classified into nine groups based on a phylogenetic analysis involving SPL protein sequences from C. cajan , Arabidopsis thaliana , Cicer arietinum , Glycine max , Phaseolus vulgaris , Vigna unguiculata and Arachis hypogaea . Further, the identification of gene structure, motif analysis, domain analysis and presence of cis -regulatory elements in the SPL family members were studied. Based on RNA-sequencing data, gene expression analysis was performed, revealing that CcSPL2.1, 3 and 13A were significantly upregulated for salt-tolerance and CcSPL14 and 15 were upregulated in a salt-susceptible cultivar. Real-time qPCR validation indicated that CcSPL3, 4, 6 and 13A were upregulated under salt stress conditions. Therefore, molecular docking was performed against the proteins of two highly expressed genes (CcSPL3 and CcSPL14 ) with three ligands: abscisic acid, gibberellic acid and indole-3-acetic acid. Afterward, their binding affinity was obtained and three-dimensional structures were predicted. In the future, our study may open avenues for harnessing CcSPL genes in pigeon pea for enhanced abiotic stress resistance and developmental traits.

Distinct patterns of cytokines, chemokines, and growth factors in synovial fluid after ACL injury in comparison to osteoarthritis.

This study analyzed knee synovial fluid after anterior cruciate ligament (ACL) tear and in osteoarthritis (OA) to test the hypotheses that concentrations of cytokines, chemokines, and growth factors differ (a) by diagnosis and (b) after ACL tear by time from injury and presence/absence of concomitant meniscus tear. Synovial fluid samples were collected from two groups, ACL tears (with or without meniscus tear) (N = 13) and Kellgren-Lawrence grade 3 and 4 OA (N = 16), undergoing clinically indicated aspiration of the knee joint. Multiple cytokines, chemokines, and growth factors were assessed using a multiplexed 45-protein panel. Comparisons were made for the concentrations of all molecules between ACL tear and OA patients, isolated versus combined ACL and meniscus tears, and categorized by time from injury: acute or early subacute (<15 days, N = 8) versus late subacute or chronic (>15 days and <3 months, N = 5). ACL tear patients have higher levels of six molecules (IL-4, IL-5, IL-13, PlGF-1, bNGF, TNF-α) in knee synovial fluid compared to OA patients. Isolated ACL tears express higher levels of IL-4, IL-13 and IFN-γ and lower levels of IL-7 than ACL tears with a concomitant meniscus tear. SDF-1α, PlGF-1, IL-1RA, HGF, bNGF, and BDNF levels are elevated immediately after injury and drop off significantly in the late subacute phase (after 15 days). Synovial fluid from knees with ACL tears have elevated metabolic activity compared to knees with OA. The cytokine profiles after ACL tears are influenced by the time from injury and the presence of meniscus tears. These findings offer valuable insights into the levels of cytokines, chemokines, and growth factors in the knee after ACL injury, information which may have important implications for the diagnosis, prognosis and treatment of this common pathology.

Broadening spectral responses and achieving environmental stability in SnS2/Ag-NPs/HfO2 flexible phototransistors.

Layered two-dimensional (2D) materials have gained popularity thanks to their atomically thin physique and strong coupling with light. Here, we investigated a wide band gap (≥ 2 eV) 2D material, i.e., tin disulfide (SnS2), and decorated it with silver nanoparticles, Ag-NPs, for broadband photodetection. Our results show that the SnS2/Ag-NPs devices exhibit broadband photodetection ranging from the ultraviolet to near-infrared (250-1050 nm) spectrum with decreased rise/decay times from 8/20 s to 7/16 s under 250 nm wavelength light compared to the bare SnS2 device. This is attributed to the localized surface plasmon resonance effect and the wide band gap of SnS2 crystal. Furthermore, the HfO2-passivated SnS2/Ag-NPs devices exhibited high photodetection performance in terms of photoresponsivity (∼12 500 A W-1), and external quantum efficiency (∼6 × 106%), which are significantly higher compared to those of bare SnS2. Importantly, after HfO2 passivation, the SnS2/Ag-NPs photodetector maintained the stable performance for several weeks with merely ∼5.7% reduction in photoresponsivity. Lastly, we fabricated a flexible SnS2/Ag-NPs photodetector, which shows excellent and stable performance under various bending curvatures (0, 20, and 10 mm), as it retains ∼80% of its photoresponsivity up to 500 bending cycles. Thus, our study provides a simple route to realize broadband and stable photoactivity in flexible 2D material-based devices.

Molecular identification and genotyping of hepatitis E virus from Southern Punjab, Pakistan.

Hepatitis E is a global health concern. Hepatitis E virus (HEV) infection is endemic in Pakistan. HEV has four genotypes: HEV-1 through HEV-4. The genotypes HEV-1 and HEV-2 are associated with infection in humans, especially in countries with poor sanitation. The genotypes HEV-3 and HEV-4 are zoonotic and human infection takes place by consuming undercooked meat or being in contact with animals. The present study was designed to ascertain the presence of HEV in the Southern Punjab region of Pakistan. First, blood samples (n = 50) were collected from patients suspected of infection with the hepatitis E virus from the Multan District. The serum was separated and the samples were initially screened using an HEV IgM-ELISA. Second, the ELISA-positive samples were subjected to PCR and were genetically characterized. For PCR, the RNA extraction and complementary DNA synthesis were done using commercial kits. The HEV ORF2 (Open Reading Frame-2, capsid protein) was amplified using nested PCR targeting a 348 bp segment. The PCR amplicons were sequenced and an evolutionary tree was constructed using MEGA X software. A protein model was built employing the SWISS Model after protein translation using ExPASy online tool. The positivity rate of anti-HEV antibodies in serum samples was found as 56% (28/50). All Pakistani HEV showed homology with genotype 1 and shared common evolutionary origin and ancestry with HEV isolates of genotype 1 of London (MH504163), France (MN401238), and Japan (LC314158). Sequence analysis of motif regions assessment and protein structure revealed that the sequences had a similarity with the reference sequence. These data suggest that genotype 1 of HEV is circulating in Pakistan. This finding could be used for the diagnosis and control of HEV in the specific geographic region focusing on its prevalent genotype.