Stimulated Full-Thickness Cutaneous Wound Healing with Bioactive Dressings of Zinc and Cobalt Ion-Doped Bioactive Glass-Coated Eggshell Membranes in a Diabetic Rabbit Model.

Eggshell membrane-based biomedical applications have recently received great attention for their wound-healing properties. However, there are limited studies on diabetic wound healing. In this regard, we devised four types of composite eggshell membrane mats with nanoscale coatings of bioactive glass/Zn/Co-doped bioactive glass (ESM + BAG, ESM + ZnBAG, ESM + CoBAG, and ESM + ZnCoBAG) as wound-dressing materials for chronic nonhealing diabetic wounds. A detailed study of the physicochemical properties of the mats was conducted. In vitro studies demonstrated cytocompatibility and viability of human dermal fibroblasts on all four types of mats. The cells also attached finely on the mats with the help of cellular extensions, as evident from scanning electron microscopy (SEM) and rhodamine-phalloidin and Hoechst 33342 staining of cellular components. Endowed with bioactive properties, these mats influenced all aspects of full-thickness skin wound healing in diabetic animal model studies. All of the mats, especially the ESM + ZnCoBAG mat, showed the earliest wound closure, effective renewal, and restructuring of the extracellular matrix in terms of an accurate and timely accumulation of collagen, elastin, and reticulin fibers. Hydroxyproline and sulfated glycosaminoglycans were significantly (p < 0.01, p < 0.05) higher in ESM-ZnCoBAG-treated wounds in comparison to ESM-BAG-treated wounds, which suggests that these newly developed mats have potential as an affordable diabetic wound care solution in biomedical research.

Recent trends of stem cell therapies in The management of orthopedic surgical challenges.

Emerged health-related problems especially with increasing population and with the wider occurrence of these issues have always put the utmost concern and led medicine to outgrow its usual mode of treatment, to achieve better outcomes. Orthopedic interventions are one of the most concerning hitches, requiring advancement in several issues, that show complications with conventional approaches. Advanced studies have been undertaken to address the issue, among which stem cell therapy emerged as a better area of growth. The capacity of the stem cells to renovate themselves and adapt into different cell types made it possible to implement its use as a regenerative slant. Harvesting the stem cells, particularly mesenchymal stem cells is easier and can be further grown in vitro. In this review, we have discussed orthopedic-related issues including bone defects and fractures, non-unions, ligament and tendon injuries, degenerative changes, and associated conditions, which require further approaches to execute better outcomes, and the advanced strategies that can be tagged along with various ways of application of mesenchymal stem cells. It aims to objectify the idea of stem cells, with a major focus on the application of Mesenchymal stem cells (MSCs) from different sources in various orthopedic interventions. It also discusses the limitations, and future scopes for further approaches in the field of regenerative medicine. The involvement of mesenchymal stem cells may transition the procedures in orthopedic interventions from predominantly surgical substitution and reconstruction to bio-regeneration and prevention. Nevertheless, additional improvements and evaluations are required to explore the effectiveness and safety of mesenchymal stem cell treatment in orthopedic regenerative medicine.

Synergistic Improvement of Antibacterial and Osteogenic Differentiation of Thermomechanically Processed Mg-Zr-Sr-Ce Alloy: Insights into the Role of Precipitate Evolution Supported by AIMD Simulation Study.

In the present study, we have discussed the influence of forging temperature (623 K (FT623), 723 K (FT723) and 823 K (FT823)) on microstructure and texture evolution and its implication on mechanical behavior, in vitro-in vivo biocorrosion, antibacterial response, and cytocompatibility of microalloyed Mg-Zr-Sr-Ce alloy. Phase analysis, SEM, and TEM characterization confirm the presence of Mg12Ce precipitate, and its stability was further validated by performing ab initio molecular dynamic simulation study. FT723 exhibits strengthened basal texture, higher fraction of second phases, and particle-stimulated nucleation-assisted DRX grains compared to other two specimens, resulting in superior strength with comparable ductility. FT723 also exhibits superior corrosion resistance mainly due to the strengthened basal texture and lower dislocation density. All the specimens exhibit excellent antibacterial behavior with Gram-negative E. coli, Gram-positive Staphylococcus aureus, and Pseudomonas aeruginosa bacteria. 100% reduction of bacterial growth is observed within 24 h of culture of the specimens. Cytocompatibility was determined by challenging specimen extracts with the MC3T3-E1 cell lines. FT723 specimen exhibits the highest cell proliferation and alkaline phosphatase activity (ALP) because of its superior corrosion resistance. The ability of the specimens to be used in orthopedic implant application was evaluated by in vivo study in rabbit femur. Neither tissue-related infection nor the detrimental effect surrounding the implant was confirmed from histological analysis. Significant higher bone regeneration surrounding the FT723 specimen was observed in SEM analysis and fluorochrome labeling. After 60 days, the FT723 specimen exhibits the highest bone formation, suggesting it is a suitable candidate for orthopedic implant application.

Biomaterials-Based Strategies to Enhance Angiogenesis in Diabetic Wound Healing.

Amidst the present healthcare issues, diabetes is unique as an emerging class of affliction with chronicity in a majority of the population. To check and control its effects, there have been huge turnover and constant development of management strategies, and though a bigger part of the health care area is involved in achieving its control and the related issues such as the effect of diabetes on wound healing and care and many of the works have reached certain successful outcomes, still there is a huge lack in managing it, with maximum effect yet to be attained. Studying pathophysiology and involvement of various treatment options, such as tissue engineering, application of hydrogels, drug delivery methods, and enhancing angiogenesis, are at constantly developing stages either direct or indirect. In this review, we have gathered a wide field of information and different new therapeutic methods and targets for the scientific community, paving the way toward more settled ideas and research advances to cure diabetic wounds and manage their outcomes.

In vitro and in vivo assessment of decellularized platelet-rich fibrin-loaded strontium doped porous magnesium phosphate scaffolds in bone regeneration.

The present work reports the effect of decellularized platelet-rich fibrin (dPRF) loaded strontium (Sr) doped porous magnesium phosphate (MgP) bioceramics on biocompatibility, biodegradability, and bone regeneration. Sustained release of growth factors from dPRF is a major objective here, which conformed to the availability of dPRF on the scaffold surface even after 7 days of in vitro degradation. dPRF-incorporated MgP scaffolds were implanted in the rabbit femoral bone defect and bone rejuvenation was confirmed by radiological examination, histological examination, fluorochrome labeling study, and micro-CT. µ-CT examination of the regained bone samples exhibited that invasion of mature bone in the pores of the MgP2Sr-dPRF sample was higher than the MgP2Sr which indicated better bone maturation capability of this composition. Quantifiable assessment using oxytetracycline labeling showed 73.55 ± 1.12% new osseous tissue regeneration for MgP2Sr-dPRF samples in contrast to 65.47 ± 1.16% for pure MgP2Sr samples, after 3 months of implantation. Histological analysis depicted the presence of abundant osteoblastic and osteoclastic cells in dPRF-loaded Sr-doped MgP samples as compared to other samples. Radiological studies also mimicked similar results in the MgP2Sr-dPRF group with intact periosteal lining and significant bridging callus formation. The present results indicated that dPRF-loaded Sr-doped magnesium phosphate bioceramics have good biocompatibility, bone-forming ability, and suitable biodegradability in bone regeneration.

Role of calcium phosphate and bioactive glass coating on in vivo bone healing of new Mg-Zn-Ca implant.

Present investigation focuses on development and detailed characterization of a new Mg alloy sample (BM) with and without coating of hydroxyapatite (BMH) and bioactive glass (BMG) by air plasma spray method. After detailed mechano-physico-chemical characterization of powders and coated samples, electrochemical corrosion and SBF immersion tests were carried out. Detailed in vitro characterizations for cell viability were undertaken using MG-63 cell line followed by in vivo tests in rabbit model for studying bone healing up to 60 days. Starting current density increases from BM to BMH to BMG indicating highest resistance towards corrosion in case of BMG samples, however BMH also showed highest icorr value suggesting slowest rate of corrosion than BM and BMG samples. Dissolution of calcium ion in case of BMH and BMG control formation of apatite phases on surface. Ca2+ ions of coatings and from SBF solution underwent reduction reaction simultaneously with conversion of Mg to MgCl2 releasing OH- in the solution, which increases pH. Viability and propagation of human osteoblast-like cells was verified using confocal microscopy observations and from expression of bone specific genes. Alkaline phosphatase assay and ARS staining indicate cell proliferation and production of neo-osseous tissue matrix. In vivo, based on histology of heart, kidney and liver, and immune response of IL-2, IL-6 and TNFα, all the materials show no adverse effects in body system. The bone creation was observed to be more for BMH. Although both BMH and BMG show rays of possibilities in early new bone formation and tough bone-implant bonding at interface as compared to bare Mg alloy, however, BMG showed better well-sprayed coating covering on substrate and resistance against corrosion prior implanting in vivo. Also, better apatite formation on this sample makes it more favourable implant.

Efficacy evaluation of ethanolic extract of Tamarindus indica L. leaves as possible alternate therapy in septic arthritis model of rabbit.

BACKGROUND: Our previous study exhibited free radicals scavenging and antioxidant activities of ethanolic and aqueous extracts of Tamarindus indica L. leaves in chronic sodium fluoride poisoning in rats. Tamarindus indica L. seed extract was also reported to have anti-arthritic efficacy by inhibiting cartilage and bone degrading factors. Therefore, an attempt was made to evaluate the effects of ethanolic extract of Tamarindus indica L. leaves in septic arthritis. METHODS: The safety study was performed by oral dosing of ethanolic extract of the plant leaves at 2 g kg- 1 for consecutive 28 days in rabbits. Septic arthritis was induced in rabbits by single intra-articular inoculation of 104 c.f.u. of Staphylococcus aureus to the left stifle joint and was monitored by bacterial colony count, some relevant biochemical parameters and histopathological interpretation of the affected joint. For efficacy evaluation in septic arthritis, linezolid at 75 mg kg- 1 twice daily for 10 days and the ethanolic extract of Tamarindus indica L. at 500 and 1000 mg kg- 1 for consecutive 14 days were administered orally to the rabbits after 48 h of induction of arthritis. RESULTS: In sub-acute toxicity study of Tamarindus indica L. leaves ethanolic extract, no significant change between days was found for aspertate aminotransferase, alanine transaminase, alkaline phosphatase, blood urea nitrogen and creatinine compared to day 0 values of the same group. The bacterial colony count of synovial fluid following Staphylococcus aureus inoculation to left stifle joint was found to be 1.08 ± 0.47 and 1.19 ± 0.29 c.f.u. mL- 1 in ethanolic extract low dose and high dose groups respectively, on day 2 which was reduced to 0.057 ± 0.036 c.f.u. mL- 1 and nil on day 16. The test extract was also found to markedly reduce simultaneous glucose difference, total protein ratio of serum and synovial fluid, joint radius and joint narrowing. CONCLUSION: Ethanolic extract of Tamarindus indica L. leaves at 500 mg kg- 1 and 1000 mg kg- 1 produced anti-arthritic effects against S. aureus induced septic arthritis in rabbits. However, the ethanolic extract at 1000 mg kg- 1 orally for consecutive 14 days showed better effects in septic arthritis.

All-Assay-Max2 pQSAR: Activity Predictions as Accurate as Four-Concentration IC50s for 8558 Novartis Assays.

Profile-quantitative structure-activity relationship (pQSAR) is a massively multitask, two-step machine learning method with unprecedented scope, accuracy, and applicability domain. In step one, a "profile" of conventional single-assay random forest regression models are trained on a very large number of biochemical and cellular pIC50 assays using Morgan 2 substructural fingerprints as compound descriptors. In step two, a panel of partial least squares (PLS) models are built using the profile of pIC50 predictions from those random forest regression models as compound descriptors (hence the name). Previously described for a panel of 728 biochemical and cellular kinase assays, we have now built an enormous pQSAR from 11 805 diverse Novartis (NVS) IC50 and EC50 assays. This large number of assays, and hence of compound descriptors for PLS, dictated reducing the profile by only including random forest regression models whose predictions correlate with the assay being modeled. The random forest regression and pQSAR models were evaluated with our "realistically novel" held-out test set, whose median average similarity to the nearest training set member across the 11 805 assays was only 0.34, comparable to the novelty of compounds actually selected from virtual screens. For the 11 805 single-assay random forest regression models, the median correlation of prediction with the experiment was only rext2 = 0.05, virtually random, and only 8% of the models achieved our standard success threshold of rext2 = 0.30. For pQSAR, the median correlation was rext2 = 0.53, comparable to four-concentration experimental IC50s, and 72% of the models met our rext2 > 0.30 standard, totaling 8558 successful models. The successful models included assays from all of the 51 annotated target subclasses, as well as 4196 phenotypic assays, indicating that pQSAR can be applied to virtually any disease area. Every month, all models are updated to include new measurements, and predictions are made for 5.5 million NVS compounds, totaling 50 billion predictions. Common uses have included virtual screening, selectivity design, toxicity and promiscuity prediction, mechanism-of-action prediction, and others. Several such actual applications are described.

Large-scale viral genome analysis identifies novel clinical associations between hepatitis B virus and chronically infected patients.

Despite the high global prevalence of chronic hepatitis B (CHB) infection, datasets covering the whole hepatitis B viral genome from large patient cohorts are lacking, greatly limiting our understanding of the viral genetic factors involved in this deadly disease. We performed deep sequencing of viral samples from patients chronically infected with HBV to investigate the association between viral genome variation and patients' clinical characteristics. We discovered novel viral variants strongly associated with viral load and HBeAg status. Patients with viral variants C1817T and A1838G had viral loads nearly three orders of magnitude lower than patients without those variants. These patients consequently experienced earlier viral suppression while on treatment. Furthermore, we identified novel variants that either independently or in combination with precore mutation G1896A were associated with the transition from HBeAg positive to the negative phase of infection. These observations are consistent with the hypothesis that mutation of the HBeAg open reading frame is an important factor driving CHB patient's HBeAg status. This analysis provides a detailed picture of HBV genetic variation in the largest patient cohort to date and highlights the diversity of plausible molecular mechanisms through which viral variation affects clinical phenotype.

Metallic ion doped tri-calcium phosphate ceramics: Effect of dynamic loading on in vivo bone regeneration.

The present study was carried out to evaluate the effect of dynamic loading on bone regeneration performance of different doped ß-tri-calcium phosphate ceramics. We have developed porous beta tri-calcium phosphate (ß-TCP), 5%zinc doped, 5% magnesium doped and 5% titanium doped ß-TCP by aqueous solution combustion technique. All the synthesized ß-TCP powders showed pore size of 21-146 µm (pure ß-TCP), 16-142 µm (Zn-ß-TCP), 28-156 µm (Mg- ß-TCP) and 14-173 µm (Ti-ß-TCP) while their apparent porosity 17.89%, 28.09%, 26.54% and 25.87% respectively. The pure and doped samples were implanted in femoral bone defect model (rabbit) to assess bone regeneration under dynamic loading. Bone regeneration was assessed after 1 and 2 month post-implantation on the basis of clinical radiological, histological, fluorochrome labelling, micro computed tomography (µ-CT) and scanning electron microscopy (SEM). Radiological and fluorochrome labelling study showed reduced size of 5%Ti-ß-TCPimplant vis-à-vis more new bone formation as compared to other groups. Micro-CT of the implanted bone sample showed a significant amount of newly formed bony tissue surrounding the Ti-ß-TCP implant as compared to other samples. Similar findings of less interfacial gap between the implant and bone were also observed in SEM study. However, all the doped materials are suitable as bone grafting material and have potential for application in bone tissue engineering.

Kinase Crystal Miner: A Powerful Approach to Repurposing 3D Hinge Binding Fragments and Its Application to Finding Novel Bruton Tyrosine Kinase Inhibitors.

Protein kinases represent an important target class for drug discovery because of their role in signaling pathways involved in disease areas such as oncology and immunology. A key element of many ATP-competitive kinase inhibitors is their hinge-binding motif. Here, we describe Kinase Crystal Miner (KCM)-a new approach developed at Boehringer Ingelheim (BI) that harvests the existing crystallographic information on kinase-inhibitor co-crystal structures from internal and external databases. About 1000 unique three-dimensional kinase inhibitor hinge binding motifs have been extracted from structures covering more than 180 different protein kinases. These hinge binding motifs along with their attachment vectors have been combined in the KCM for the purpose of scaffold hopping, kinase screening deck design, and interactive structure-based design. Prospective scaffold hopping using the KCM identified two potent and selective Bruton tyrosine kinase (BTK) inhibitors with hinge binding fragments novel to BTK.

Is lithium essential for epididymal sperm maturation?

A wider biological role of ultratrace element lithium in the mammalian reproduction has been reported, however, presence of lithium in the epididymal luminal fluid (ELF) and its influence on sperm during maturation events in the epididymal regions are still unknown. A pilot study was carried out in Jamunapari buck which revealed that levels of lithium in the ELF diminished gradually and significantly (P<0.01) from caput to cauda epididymis, concomitantly, a distinct increase (P<0.01) in the spermatozoan motility, viability and hypo-osmotic reactive sperm were observed, except spermatozoan motility that was found absent in the caput epididymis. Therefore, we hypothesize that levels of lithium in the epididymal regions is one of the motility initiation and/or regulatory factor for epididymal sperm maturation essential for acquiring fertilizing competence of sperm cells, hence, lithium could also be considered as one of the biomarker of sperm maturation in any species.

Performance of Dark Chemical Matter in High Throughput Screening.

A statistical analysis of 203 high-throughput screens was conducted studying the propensity of small molecules in the Boehringer Ingelheim screening deck to show biological activity after having tested as inactive previously in a growing number of screening assays. Dark chemical matter (DCM) compounds, which have been tested and found to be inactive in 50 or more assays, exhibit hit rates that are comparable to those of compounds tested in much fewer assays. Only compounds tested as inactive in 125 or more assays started showing a hit rate deterioration of up to 40% compared to compounds tested in less than 25 assays. The observed large number of DCM compounds in the BI screening deck is found to be in line with the expected fraction of DCM calculated based on a probability analysis. The analysis suggests not only that DCM compounds have the chance to occasionally provide valuable hits associated with higher selectivity as recently shown by Novartis ( Nat. Chem. Biol. 2015 , 11 , 958 ) but that there is little compelling reason to exclude DCM compounds from screening decks in favor of previously untested or less tested compounds.

Understanding osteomyelitis and its treatment through local drug delivery system.

Chronic osteomyelitis is a major challenge in bone surgery. Conventional use of antibiotics is not an effective way to control the malaise due to so many reasons. Determination of optimal treatment strategy becomes difficult for the orthopaedic surgeons and as a consequence, the patients suffer not only from therapeutic failure but also due to adverse side effects of antibiotics and financial loss due to additional stay at hospitals. A wide application of carrier systems, as a medium for local delivery of antibiotics, is being used experimentally and clinically for the treatment of osteomyelitis. This kind of delivery system provides sustained higher concentration of antibiotics at the infection site with reduced possibility of toxicity. This review highlight etiology and pathophysiology of osteomyelitis, current therapeutic options with their limitations, and potentiality of biomaterial based carrier materials impregnated with antibiotics as local delivery approach.

Influence of single and binary doping of strontium and lithium on in vivo biological properties of bioactive glass scaffolds.

Effects of strontium and lithium ion doping on the biological properties of bioactive glass (BAG) porous scaffolds have been checked in vitro and in vivo. BAG scaffolds were prepared by conventional glass melting route and subsequently, scaffolds were produced by evaporation of fugitive pore formers. After thorough physico-chemical and in vitro cell characterization, scaffolds were used for pre-clinical study. Soft and hard tissue formation in a rabbit femoral defect model after 2 and 4 months, were assessed using different tools. Histological observations showed excellent osseous tissue formation in Sr and Li + Sr scaffolds and moderate bone regeneration in Li scaffolds. Fluorochrome labeling studies showed wide regions of new bone formation in Sr and Li + Sr doped samples as compared to Li doped samples. SEM revealed abundant collagenous network and minimal or no interfacial gap between bone and implant in Sr and Li + Sr doped samples compared to Li doped samples. Micro CT of Li + Sr samples showed highest degree of peripheral cancellous tissue formation on periphery and cortical tissues inside implanted samples and vascularity among four compositions. Our findings suggest that addition of Sr and/or Li alters physico-chemical properties of BAG and promotes early stage in vivo osseointegration and bone remodeling that may offer new insight in bone tissue engineering.

Automatically updating predictive modeling workflows support decision-making in drug design.

Using predictive models for early decision-making in drug discovery has become standard practice. We suggest that model building needs to be automated with minimum input and low technical maintenance requirements. Models perform best when tailored to answering specific compound optimization related questions. If qualitative answers are required, 2-bin classification models are preferred. Integrating predictive modeling results with structural information stimulates better decision making. For in silico models supporting rapid structure-activity relationship cycles the performance deteriorates within weeks. Frequent automated updates of predictive models ensure best predictions. Consensus between multiple modeling approaches increases the prediction confidence. Combining qualified and nonqualified data optimally uses all available information. Dose predictions provide a holistic alternative to multiple individual property predictions for reaching complex decisions.

An overview of molecular fingerprint similarity search in virtual screening.

INTRODUCTION: A central premise of medicinal chemistry is that structurally similar molecules exhibit similar biological activities. Molecular fingerprints encode properties of small molecules and assess their similarities computationally through bit string comparisons. Based on the similarity to a biologically active template, molecular fingerprint methods allow for identifying additional compounds with a higher chance of displaying similar biological activities against the same target - a process commonly referred to as virtual screening (VS). AREAS COVERED: This article focuses on fingerprint similarity searches in the context of compound selection for enhancing hit sets, comparing compound decks, and VS. In addition, the authors discuss the application of fingerprints in predictive modeling. EXPERT OPINION: Fingerprint similarity search methods are especially useful in VS if only a few unrelated ligands are known for a given target and therefore more complex and information rich methods such as pharmacophore searches or structure-based design are not applicable. In addition, fingerprint methods are used in characterizing properties of compound collections such as chemical diversity, density in chemical space, and content of biologically active molecules (biodiversity). Such assessments are important for deciding what compounds to experimentally screen, to purchase, or to assemble in a virtual compound deck for in silico screening or de novo design.

Towards the next generation of dual Bcl-2/Bcl-xL inhibitors.

Structural modifications of the left-hand side of compound 1 were identified which retained or improved potent binding to Bcl-2 and Bcl-xL in in vitro biochemical assays and had strong activity in an RS4;11 apoptotic cellular assay. For example, sulfoxide diastereomer 13 maintained good binding affinity and comparable cellular potency to 1 while improving aqueous solubility. The corresponding diastereomer (14) was significantly less potent in the cell, and docking studies suggest that this is due to a stereochemical preference for the RS versus SS sulfoxide. Appending a dimethylaminoethoxy side chain (27) adjacent to the benzylic position of the biphenyl moiety of 1 improved cellular activity by approximately three-fold, and this activity was corroborated in cell lines overexpressing Bcl-2 and Bcl-xL.

Taking up subfascial endoscopic perforator surgery for patients of lower limb varicose veins with below knee perforators, in a government medical college-a review of eleven cases.

Varicose veins are the most common manifestation of chronic venous insufficiency (CVI) worldwide. They interfere with the patients' daily activities and hamper their professional endeavors, and therefore need to be addressed at the earliest with the best tools. Eleven patients of varicose veins of the lower limb with below knee perforators underwent subfascial endoscopic perforator surgery (SEPS) from October 2010 to December 2011 in our institute. The procedure was successfully completed in all 11 patients. The mean operating time was 78 min (60-96 min). The results showed a favorable outcome for the patients in terms of faster recovery and less morbidity.

Kinase-Kernel Models: Accurate Chemogenomic Method for the Entire Human Kinome.

Chemogenomic kinase-kernel virtual screening models interpolate between very accurate, empirically-trained Profile-QSAR models of the nearest binding-site homologues with IC50 assay data. Between them, activity has been predicted for the entire human kinome.