Controlling Spin Crossover in a Family of Dinuclear Fe(III) Complexes via the Bis(catecholate) Bridging Ligand.

Spin crossover (SCO) complexes can reversibly switch between low spin (LS) and high spin (HS) states, affording possible applications in sensing, displays, and molecular electronics. Dinuclear SCO complexes with access to [LS-LS], [LS-HS], and [HS-HS] states may offer increased levels of functionality. The nature of the SCO interconversion in dinuclear complexes is influenced by the local electronic environment. We report the synthesis and characterization of [{FeIII(tpa)}2spiro](PF6)2 (1), [{FeIII(tpa)}2Br4spiro](PF6)2 (2), and [{FeIII(tpa)}2thea](PF6)2 (3) (tpa = tris(2-pyridylmethyl)amine, spiroH4 = 3,3,3',3'-tetramethyl-1,1'-spirobi(indan)-5,5',6,6'-tetraol, Br4spiroH4 = 3,3,3',3'-tetramethyl-1,1'-spirobi(indan)-4,4',7,7'-tetrabromo-5,5',6,6'-tetraol, theaH4 = 2,3,6,7-tetrahydroxy-9,10-dimethyl-9,10-dihydro-9,10-ethanoanthracene), utilizing non-conjugated bis(catecholate) bridging ligands. In the solid state, magnetic and structural analysis shows that 1 remains in the [HS-HS] state, while 2 and 3 undergo a partial SCO interconversion upon cooling from room temperature involving the mixed [LS-HS] state. In solution, all complexes undergo SCO from [HS-HS] at room temperature, via [LS-HS] to mixtures including [LS-LS] at 77 K, with the extent of SCO increasing in the order 1 < 2 < 3. Gas phase density functional theory calculations suggest a [LS-LS] ground state for all complexes, with the [LS-HS] and [HS-HS] states successively destabilized. The relative energy separations indicate that ligand field strength increases following spiro4- < Br4spiro4- < thea4-, consistent with solid-state magnetic and EPR behavior. All three complexes show stabilization of the [LS-HS] state in relation to the midpoint energy between [LS-LS] and [HS-HS]. The relative stability of the [LS-HS] state increases with increasing ligand field strength of the bis(catecholate) bridging ligand in the order 1 < 2 < 3. The bromo substituents of Br4spiro4- increase the ligand field strength relative to spiro4-, while the stronger ligand field provided by thea4- arises from extension of the overlapping π-orbital system across the two catecholate units. This study highlights how SCO behavior in dinuclear complexes can be modulated by the bridging ligand, providing useful insights for the design of molecules that can be interconverted between more than two states.

A saccharide-based binder for efficient polysulfide regulations in Li-S batteries.

The viability of lithium-sulfur batteries as an energy storage technology depends on unlocking long-term cycle stability. Most instability stems from the release and transport of polysulfides from the cathode, which causes mossy growth on the lithium anode, leading to continuous consumption of electrolyte. Therefore, development of a durable cathode with minimal polysulfide escape is critical. Here, we present a saccharide-based binder system that has a capacity for the regulation of polysulfides due to its reducing properties. Furthermore, the binder promotes the formation of viscoelastic filaments during casting which endows the sulfur cathode with a desirable web-like microstructure. Taken together this leads to 97% sulfur utilisation with a cycle life of 1000 cycles (9 months) and capacity retention (around 700 mAh g-1 after 1000 cycles). A pouch cell prototype with a specific energy of up to 206 Wh kg-1 is produced, demonstrating the promising potential for practical applications.

Docosahexaenoic Acid Is Naturally Concentrated at the sn-2 Position in Triacylglycerols of the Australian Thraustochytrid Aurantiochytrium sp. Strain TC 20.

The Labyrinthulomycetes or Labyrinthulea are a class of protists that produce a network of filaments that enable the cells to glide along and absorb nutrients. One of the main two Labyrinthulea groups is the thraustochytrids, which are becoming an increasingly recognised and commercially used alternate source of long-chain (LC, ≥C20) omega-3 containing oils. This study demonstrates, to our knowledge for the first time, the regiospecificity of the triacylglycerol (TAG) fraction derived from Australian thraustochytrid Aurantiochytrium sp. strain TC 20 obtained using 13C nuclear magnetic resonance spectroscopy (13C NMR) analysis. The DHA present in the TC 20 TAG fraction was determined to be concentrated in the sn-2 position, with TAG (16:0/22:6/16:0) identified as the main species present. The sn-2 preference is similar to that found in salmon and tuna oil, and differs to seal oil containing largely sn-1,3 LC-PUFA. A higher concentration of sn-2 DHA occurred in the thraustochytrid TC 20 oil compared to that of tuna oil.

Development of a Brassica napus (Canola) Crop Containing Fish Oil-Like Levels of DHA in the Seed Oil.

Plant seeds have long been promoted as a production platform for novel fatty acids such as the ω3 long-chain (≥ C20) polyunsaturated fatty acids eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) commonly found in fish oil. In this article we describe the creation of a canola (Brassica napus) variety producing fish oil-like levels of DHA in the seed. This was achieved by the introduction of a microalgal/yeast transgenic pathway of seven consecutive enzymatic steps which converted the native substrate oleic acid to α-linolenic acid and, subsequently, to EPA, docosapentaenoic acid (DPA) and DHA. This paper describes construct design and evaluation, plant transformation, event selection, field testing in a wide range of environments, and oil profile stability of the transgenic seed. The stable, high-performing event NS-B50027-4 produced fish oil-like levels of DHA (9-11%) in open field trials of T3 to T7 generation plants in several locations in Australia and Canada. This study also describes the highest seed DHA levels reported thus far and is one of the first examples of a deregulated genetically modified crop with clear health benefits to the consumer.

A community-built calibration system: The case study of quantification of metabolites in grape juice by qNMR spectroscopy.

Nuclear Magnetic Resonance (NMR) is an analytical technique extensively used in almost every chemical laboratory for structural identification. This technique provides statistically equivalent signals in spite of using spectrometer with different hardware features and is successfully used for the traceability and quantification of analytes in food samples. Nevertheless, to date only a few internationally agreed guidelines have been reported on the use of NMR for quantitative analysis. The main goal of the present study is to provide a methodological pipeline to assess the reproducibility of NMR data produced for a given matrix by spectrometers from different manufacturers, with different magnetic field strengths, age and hardware configurations. The results have been analyzed through a sequence of chemometric tests to generate a community-built calibration system which was used to verify the performance of the spectrometers and the reproducibility of the predicted sample concentrations.

Structural characterization and gas-phase studies of the [Ag10H8(L)6]2+ nanocluster dication.

The reactions between silver salts and borohydrides produce a rich set of products that range from discrete mononuclear compounds through to silver nanoparticles and colloids. Previous studies using electrospray ionization mass spectrometry (ESI-MS) to track the cationic products in solutions containing sodium borohydride, silver(i) tetrafluoroborate and the bisphosphine ligands, L, bis(diphenylphosphino)methane (dppm) and bis(diphenylphosphino)amine (dppa) have identified the dications [Ag10H8(L)6]2+. Here we isolate and structurally characterize [Ag10H8(dppa)6](BF4)2, and [Ag10H8(dppa)6](NO3)2via X-ray crystallography. Both dications have nearly identical structural features consisting of a Ag10 scaffold with the atoms lying on vertices of a bicapped square antiprism. DFT calculations were carried out to suggest potential sites for the hydrides. Ion-mobility mass spectrometry experiments revealed that [Ag10H8(dppa)6]2+ and [Ag10H8(dppm)6]2+ have similar collision cross sections, while multistage mass spectrometry experiments were used to compare their unimolecular gas-phase chemistry. Although the same initial sequential ligand loss followed by cluster fission and H2 evolution is observed, the more acidic N-H of the dppa provides a more labile H for H2 loss and H/D scrambling processes as revealed by isotope labelled experiments.

DFT Prediction and Experimental Investigation of Valence Tautomerism in Cobalt-Dioxolene Complexes.

The family of complexes of general formula [Co(Me ntpa)(Xdiox)]+ (tpa = tris(2-pyridylmethyl)amine, n = 0-3 corresponds to successive methylation of the 6-position of the pyridine rings; X = Br4, Cl4, H4, 3,5-Me2, 3,5- tBu2; diox = dioxolene) was investigated by density functional theory (DFT) calculations to predict the likelihood of valence tautomerism (VT). The OPBE functional with relativistic and solvent corrections allowed accurate reproduction of trends in spin-state energetics, affording the prediction of VT in complex [Co(Me3tpa)(Br4diox)]+ (1+). One-electron oxidation of neutral precursor [CoII(Me3tpa)(Br4cat)] (1) enabled isolation of target compounds 1(PF6) and 1(BPh4). Solution variable-temperature UV-vis absorption and Evans method magnetic susceptibility data confirm DFT predictions that 1+ exists in a temperature-dependent valence tautomeric equilibrium between low-spin Co(III)-catecholate and high-spin Co(II)-semiquinonate forms. The solution VT transition temperature of 1+ is solvent-tunable with critical temperatures in the range of 291-359 K for the solvents measured. Solid-state magnetic susceptibility measurements of 1(PF6) and 1(BPh4) reveal the onset of VT transitions above room temperature.

Solvation Effects on the Permeation and Aging Performance of PIM-1-Based MMMs for Gas Separation.

Membranes are particularly attractive for lowering the energy intensity of separations as they eliminate phase changes. While many tantalizing polymers are known, limitations in selectivity and stability slightly preclude further development. Mixed-matrix membranes may address these shortcomings. Key to their realization is the intimate mixing between the polymer and the additive to eliminate nonselective transport, improve selectivity, and resist physical aging. Polymers of intrinsic microporosity (PIMs) have inherently promising gas transport properties. Here, we show that porous additives can improve transport and resist aging in PIM-1. We develop a simple, low-cost, and scalable hyper-cross-linked polymer (poly-dichloroxylene, pDCX), which was hydroxylated to form an intimate mixture with the polar PIM-1. Solvent variation allowed control of physical aging rates and improved selectivity for smaller gases. This detailed study has allowed many interactions within mixed matrix membranes to be directly elucidated and presents a practical means to stabilize porous polymers for separation applications.

Synthesis, structure, and condensed-phase reactivity of [Ag3(µ3-H)(µ3-BH4)LPh3](BF4) (LPh = bis(diphenylphosphino)amine) with CS2.

Electrospray ionisation mass spectrometry (ESI-MS) was used to monitor the reaction of AgBF4, bis(diphenylphosphino)amine (dppa = (Ph2P)2NH = LPh) and NaBH4 in acetonitrile and thereby direct the synthesis of the silver nanocluster [Ag3(µ3-H)(µ3-BH4)LPh3](BF4), 3b·BF4, formed via reaction of AgBF4, bis(diphenylphosphino)amine (dppa = (Ph2P)2NH = LPh) and NaBH4 in acetonitrile. The X-ray structure of 3b·BF4 highlights that the cation adopts a planar trinuclear Ag3 geometry surrounded by three dppa ligands and coordinated on the bottom face by a µ3-hydride and on the top face by a µ3-BH4. The solution phase structure of 3b·BF4 was characterised by multinuclear NMR and DOSY NMR, which showed that the borohydride anion remains bound in the [Ag3(µ3-H)(µ3-BH4)LPh3]+ cluster cation in solution. ESI-MS and in situ1H and HSQC NMR spectroscopy reveals that 3b·BF4 reacts with CS2 in solution at the BH4 site to yield [Ag3(H)(S2CH)LPh3]+, 4b, which has to date eluded structural characterisation via X-ray crystallography due to lack of formation of suitable crystals. The gas-phase ion chemistry of [Ag3(H)(S2CH)LPh3]+ was examined under multistage mass spectrometry conditions using collision-induced dissociation (CID) and compared to that of the previously examined copper analogue, [Cu3(H)(S2CH)LPh3]+. While both cluster cations fragment via ligand loss, the CID spectra of the resultant [M3(H)(S2CH)LPh2]+ are different. Unlike [Cu3(H)(S2CH)LPh2]+, which solely undergoes loss of thioformaldehyde to give [Cu3(S)LPh2]+, [Ag3(H)(S2CH)LPh2]+ gives a richer CID spectrum with fragmentation channels that include ligand loss, CH2S loss and reductive elimination of dithioformic acid. DFT calculations exploring rearrangement and fragmentation of the model systems [M3(H)(S2CH)LMe2]+ ((Me2P)2NH = dmpa = LMe) were used to suggest plausible mechanisms and examine the energetics of the three competing channels: ligand loss, CH2S loss and reductive elimination of dithioformic acid.

Increased DHA Production in Seed Oil Using a Selective Lysophosphatidic Acid Acyltransferase.

Metabolic engineering of the omega-3 (ω3) long chain polyunsaturated fatty acid biosynthesis pathway has generated fish oil-like levels of pharmaceutically and nutritionally important docosahexaenoic acid (DHA) in plant seeds. However, the majority of DHA has been accumulated at the sn-1 and sn-3 positions of triacylglycerol (TAG) in these engineered seeds, leaving only a minor amount (∼10%) at sn-2 position and indicating a strong discrimination (or, a very poor specificity) for DHA by seed lysophosphatidic acid acyltransferases (LPAATs), which mediate the acylation of sn-2 position of glycerol backbone. In order to increase the level of DHA at sn-2 position of TAG and to increase overall DHA level in seeds, we attempted to discover DHA-preferring LPAATs. Several LPAATs for acylation of the sn-2 position of the TAG glycerol backbone were investigated for substrate preference for DHA. In transiently expressing these LPAATs in Nicotiana benthamiana, a Mortierella alpina LPAAT had the highest substrate specificity for accumulating DHA onto oleoyl-lysophosphatidic acid (oleoyl-LPA), while the plant LPAATs tested showed lower preference for DHA. In a competition assay with a pool of four ω3 acyl-Coenzyme A (CoA) substrates involved in the DHA biosynthesis pathway, LPAATs from both M. alpina and Emiliania huxleyi showed a high preference for DHA-CoA acylation onto oleoyl-LPA. When docosahexaenoyl-LPA was used as the acyl receiver, M. alpina LPAAT also showed a high preference for DHA-CoA. Stable overexpression of M. alpina LPAAT in an Arabidopsis line that expressed the DHA biosynthesis pathway significantly increased both the total DHA levels and the distribution of DHA onto the sn-2 position of seed TAG. LC-MS analysis of the seed TAG species also confirmed that overexpression of M. alpina LPAAT increased di-DHA and tri-DHA TAGs, suggesting that the M. alpina LPAAT could enrich DHA at the TAG sn-2 position, leading to a metabolic engineering of oil seed for channeling DHA into the sn-2 position of TAG and to a higher DHA level.

Visible-Light-Driven "On"/"Off" Photochromism of a Polyoxometalate Diarylethene Coordination Complex.

Herein we report the first photochromic polyoxometalate (POM)-based diarylethene (DAE) coordination complex, prepared by ligation of two cobalt(III)-incorporated borotungstates [BIIIWVI11O39CoIII]6- with the ditopic pyridyl-containing diarylethene (C25H16N2F6S2). The solution-state composition, structure, and stability of the assembly were probed using 1H and 19F nuclear magnetic resonance spectroscopy (NMR), electrospray ionization quadrupolar time-of-flight mass spectrometry (ESI-QTOF-MS), ultraviolet-visible spectroscopy (UV-vis), and small-angle X-ray scattering (SAXS), revealing that the complex self-organizes to adopt a molecular dumbbell structure due to electrostatic and steric considerations. This conformation is a prerequisite for the photocyclization reaction. The assembly was found to be switchable between two states using visible light due to the perturbation of the DAE electronic structure on coordination to the POM. We present photophysical data, including the reaction quantum efficiency of the molecular switch in both directions measured using a custom-built quantum yield determination setup in addition to fatigue resistance on prolonged irradiation.

Synthesis and X-Ray Crystallographic Characterisation of Frustum-Shaped Ligated [Cu18 H16 (DPPE)6 ]2+ and [Cu16 H14 (DPPA)6 ]2+ Nanoclusters and Studies on Their H2 Evolution Reactions.

We report new structural motifs for Cu nanoclusters that conceptually represent seed crystals for large face-centred cubic (FCC) crystal growth. Kinetically controlled syntheses, high resolution mass spectrometry experiments for determination of the dication formulae and crystallographic characterisation were carried out for [Cu18 H16 (DPPE)6 ][BF4 ][Cl] (DPPE=bis(diphenylphosphino)ethane) and [Cu16 H14 (DPPA)6 ][(BF4 )2 ] (DPPA=bis(diphenylphosphino)amine) polyhydrido nanoclusters, which feature the unprecedented bifrustum and frustum metal-core architecture in metal nanoclusters. The Cu18 nanocluster contains two Cu9 frustum cupolae and the Cu16 nanocluster has one Cu9 frustum cupola and a Cu7 distorted hexagonal-shape base. Gas-phase experiments revealed that both Cu18 H16 and Cu16 H14 cores can spontaneously release H2 upon removal of one bisphosphine capping ligand.

Synthesis, Structural Characterization, and Gas-Phase Unimolecular Reactivity of Bis(diphenylphosphino)amino Copper Hydride Nanoclusters [Cu3(X)(µ3-H)((PPh2)2NH)3](BF4), Where X = µ2-Cl and µ3-BH4.

An electrospray ionization mass spectrometry (ESI-MS) survey of the types of cationic copper clusters formed from an acetonitrile solution containing a 1:1:20 mixture of tetrakis(acetonitrile)copper(I) tetrafluoroborate [Cu(MeCN)4(BF4)], bis(diphenylphosphino)amine (dppa = (Ph2P)2NH = L), and NaBH4 revealed a major peak, which based on both the accurate masses and isotope distribution was assigned as [Cu3(BH4)(H)(L)3]+. This prompted synthetic efforts resulting in isolation of the dppa ligated trinuclear copper hydride nanoclusters, [Cu3(µ2-Cl)(µ3-H)(L)3](BF4) and [Cu3(µ3-BH4)(µ3-H)(L)3](BF4), which were subsequently structurally characterized using high resolution ESI-MS, X-ray crystallography, NMR, and IR spectroscopy. The X-ray structures reveal a common structural feature of the cation, in which the three copper(I) ions adopt a planar trinuclear Cu3 geometry coordinated on the bottom face by a µ3-hydride and surrounded by three dppa ligands. ESI-MS of [Cu3(µ2-Cl)(µ3-H)(L)3](BF4) and [Cu3(µ3-BH4)(µ3-H)(L)3](BF4) produces [Cu3(µ2-Cl)(µ3-H)(L)3]+ and [Cu3(µ3-BH4)(µ3-H)(L)3]+. The unimolecular gas-phase ion chemistry of these cations was examined under multistage tandem mass spectrometry conditions using collision-induced dissociation (CID). CID of both cations proceeds via ligand loss to give [Cu3(µ3-H)(X)(L)2]+, which is in competition with BH3 loss in the case of X = BH4. DFT calculations on the fragmentation of [Cu3(µ3-BH4)(µ3-H)(LMe)3]+ suggest that BH3 loss produces the hitherto elusive [Cu3(µ3-H)(µ2-H)(LMe)3]+, which undergoes further fragmentation via H2 loss. CID of the deuterium labeled cluster [Cu3(µ3-D)(µ3-BD4)(L)3]+ reveals that the competing losses of ligand and BD3 yield [Cu3(µ3-BD4)(µ3-D)(L)2]+ and [Cu3(D)2(L)3]+ as primary products, which subsequently fragment via further losses of BD3 or a ligand to give [Cu3(D)2(L)2]+. The coordinated hydrides in the latter ion are activated toward elimination of D2 to give [Cu3(L)2]+. Loss of HD and 2HD are minor channels, consistent with higher DFT predicted endothermicities to form [Cu3(D)(L)(L-H)]+ and [Cu3(L-H)2]+.

Ligand-induced substrate steering and reshaping of [Ag2(H)](+) scaffold for selective CO2 extrusion from formic acid.

Metalloenzymes preorganize the reaction environment to steer substrate(s) along the required reaction coordinate. Here, we show that phosphine ligands selectively facilitate protonation of binuclear silver hydride cations, [LAg2(H)](+) by optimizing the geometry of the active site. This is a key step in the selective, catalysed extrusion of carbon dioxide from formic acid, HO2CH, with important applications (for example, hydrogen storage). Gas-phase ion-molecule reactions, collision-induced dissociation (CID), infrared and ultraviolet action spectroscopy and computational chemistry link structure to reactivity and mechanism. [Ag2(H)](+) and [Ph3PAg2(H)](+) react with formic acid yielding Lewis adducts, while [(Ph3P)2Ag2(H)](+) is unreactive. Using bis(diphenylphosphino)methane (dppm) reshapes the geometry of the binuclear Ag2(H)(+) scaffold, triggering reactivity towards formic acid, to produce [dppmAg2(O2CH)](+) and H2. Decarboxylation of [dppmAg2(O2CH)](+) via CID regenerates [dppmAg2(H)](+). These gas-phase insights inspired variable temperature NMR studies that show CO2 and H2 production at 70 °C from solutions containing dppm, AgBF4, NaO2CH and HO2CH.

Synthesis, structure and gas-phase reactivity of the mixed silver hydride borohydride nanocluster [Ag3(µ3-H)(µ3-BH4)L(Ph)3]BF4 (L(Ph) = bis(diphenylphosphino)methane).

Borohydrides react with silver salts to give products that span multiple scales ranging from discrete mononuclear compounds through to silver nanoparticles and colloids. The cluster cations [Ag3(H)(BH4)L3](+) are observed upon electrospray ionization mass spectrometry of solutions containing sodium borohydride, silver(I) tetrafluoroborate and bis(dimethylphosphino)methane (L(Me)) or bis(diphenylphosphino)methane (L(Ph)). By adding NaBH4 to an acetonitrile solution of AgBF4 and L(Ph), cooled to ca. -10 °C, we have been able to isolate the first mixed silver hydride borohydride nanocluster, [Ag3(µ3-H)(µ3-BH4)L(Ph)3]BF4, and structurally characterise it via X-ray crystallography. Combined gas-phase experiments (L(Me) and L(Ph)) and DFT calculations (L(Me)) reveal how loss of a ligand from the cationic complexes [Ag3(H)(BH4)L3](+) provides a change in geometry that facilitates subsequent loss of BH3 to produce the dihydride clusters, [Ag3(H)2Ln](+) (n = 1 and 2). Together with the results of previous studies (Girod et al., Chem. - Eur. J., 2014, 20, 16626), this provides a direct link between mixed silver hydride/borohydride nanoclusters, silver hydride nanoclusters, and silver nanoclusters.

Synthesis, structural characterization, and gas-phase unimolecular reactivity of the silver hydride nanocluster [Ag3((PPh2)2CH2)3(µ3-H)](BF4)2.

A bis(diphenylphosphino)methane-ligated trinuclear silver hydride nanocluster, [Ag3((Ph2P)2CH2)3(µ3-H)](BF4)2, featuring three silver(I) ions coordinated to a µ3-hydride, and its deuteride analogue, [Ag3((Ph2P)2CH2)3(µ3-D)](BF4)2, have been isolated and structurally characterized using electrospray ionization mass spectrometry (ESI-MS), X-ray crystallography, NMR and IR spectroscopy. The position of the deuteride in [Ag3((Ph2P)2CH2)3(µ3-D)](BF4)2 was determined by neutron diffraction. ESI-MS of [Ag3L3(µ3-H/D)](BF4)2 [L = ((Ph2P)2CH2)2] produces [Ag3L3(µ3-H/D)](2+) and [Ag3L3(µ3-H/D)(BF4)](+). A rich gas-phase ion chemistry of [Ag3L3(µ3-H/D)](2+) is observed under conditions of collision-induced dissociation (CID) and electron-capture dissociation (ECD). CID gives rise to the following complementary ion pairs: [Ag3L2](+) and [L+(H/D)](+); [Ag2(H/D)L2](+) and [AgL](+); [Ag2(H/D)L](+) and [AgL2](+). ECD gives rise to a number of dissociation channels including loss of the bis(phosphine) ligand, fragmentation of a coordinated bis(phosphine) ligand via C-P bond activation, and loss of a hydrogen (deuterium) atom with concomitant formation of [Ag3L3](+). Under CID conditions, [Ag3L3(µ3-H/D)(BF4)](+) fragments via ligand loss, the combined loss of a ligand and [H,B,F4], and cluster fragmentation to give [Ag2(BF4)L2](+) and [Ag2(L-H)L](+) [where (L-H) = (Ph2P)2CH(-)].

Ending aging in super glassy polymer membranes.

Aging in super glassy polymers such as poly(trimethylsilylpropyne) (PTMSP), poly(4-methyl-2-pentyne) (PMP), and polymers with intrinsic microporosity (PIM-1) reduces gas permeabilities and limits their application as gas-separation membranes. While super glassy polymers are initially very porous, and ultra-permeable, they quickly pack into a denser phase becoming less porous and permeable. This age-old problem has been solved by adding an ultraporous additive that maintains the low density, porous, initial stage of super glassy polymers through absorbing a portion of the polymer chains within its pores thereby holding the chains in their open position. This result is the first time that aging in super glassy polymers is inhibited whilst maintaining enhanced CO2 permeability for one year and improving CO2/N2 selectivity. This approach could allow super glassy polymers to be revisited for commercial application in gas separations.

Metabolic engineering Camelina sativa with fish oil-like levels of DHA.

BACKGROUND: Omega-3 long-chain (≥C20) polyunsaturated fatty acids (ω3 LC-PUFA) such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) are critical for human health and development [corrected].. Numerous studies have indicated that deficiencies in these fatty acids can increase the risk or severity of cardiovascular, inflammatory and other diseases or disorders. EPA and DHA are predominantly sourced from marine fish although the primary producers are microalgae. Much work has been done to engineer a sustainable land-based source of EPA and DHA to reduce pressure on fish stocks in meeting future demand, with previous studies describing the production of fish oil-like levels of DHA in the model plant species, Arabidopsis thaliana. PRINCIPAL FINDINGS: In this study we describe the production of fish oil-like levels (>12%) of DHA in the oilseed crop species Camelina sativa achieving a high ω3/ω6 ratio. The construct previously transformed in Arabidopsis as well as two modified construct versions designed to increase DHA production were used. DHA was found to be stable to at least the T5 generation and the EPA and DHA were found to be predominantly at the sn-1,3 positions of triacylglycerols. Transgenic and parental lines did not have different germination or seedling establishment rates. CONCLUSIONS: DHA can be produced at fish oil-like levels in industrially-relevant oilseed crop species using multi-gene construct designs which are stable over multiple generations. This study has implications for the future of sustainable EPA and DHA production from land-based sources.

Parallel screening of low molecular weight fragment libraries: do differences in methodology affect hit identification?

Fragment screening is becoming widely accepted as a technique to identify hit compounds for the development of novel lead compounds. In neighboring laboratories, we have recently, and independently, performed a fragment screening campaign on the HIV-1 integrase core domain (IN) using similar commercially purchased fragment libraries. The two campaigns used different screening methods for the preliminary identification of fragment hits; one used saturation transfer difference nuclear magnetic resonance spectroscopy (STD-NMR), and the other used surface plasmon resonance (SPR) spectroscopy. Both initial screens were followed by X-ray crystallography. Using the STD-NMR/X-ray approach, 15 IN/fragment complexes were identified, whereas the SPR/X-ray approach found 6 complexes. In this article, we compare the approaches that were taken by each group and the results obtained, and we look at what factors could potentially influence the final results. We find that despite using different approaches with little overlap of initial hits, both approaches identified binding sites on IN that provided a basis for fragment-based lead discovery and further lead development. Comparison of hits identified in the two studies highlights a key role for both the conditions under which fragment binding is measured and the criteria selected to classify hits.

High refractive index polysiloxane as injectable, in situ curable accommodating intraocular lens.

Functionalised siloxane macromonomers, with properties designed for application as an injectable, in situ curable accommodating intraocular lens (A-IOL), were prepared via re-equilibration of a phenyl group-containing polysiloxane of very high molecular weight with octamethylcyclotetrasiloxane (D4) and 2,4,6,8-tetra(n-propyl-3-methacrylate)-2,4,6,8-tetramethyl-cyclotetrasiloxane (D4(AM)) in toluene using trifluoromethanesulfonic acid as a catalyst. Hexaethyldisiloxane was used as an end group to control the molecular weight of the polymer. The generated polymers had a consistency suitable for injection into the empty lens capsule. The polymers contained a low ratio of polymerisable groups so that, in the presence of a photo-initiator, they could be cured on demand in situ within 5 min under irradiation of blue light to form an intraocular lens within the lens capsule. All resulting polysiloxane soft gels had a low elastic modulus and thus should be able to restore accommodation. The pre-cure viscosity and post-cure modulus of the generated polysiloxanes were controlled by the end group and D4(AM) concentrations respectively in the re-equilibration reactions. The refractive index could be precisely controlled by adjusting the aromatic ratio in the polymer to suit such application as an artificial lens. Lens stretching experiments with both human and non-human primate cadaver lenses of different ages refilled with polysiloxane polymers provided a significant increase in amplitude of accommodation (up to 4 D more than that of the respective natural lens). Both in vitro cytotoxicity study using L929 cell lines and in vivo biocompatibility study in rabbit models demonstrated the non-cytotoxicity and ocular biocompatibility of the polymer.