Fixed-bed operation for manganese removal from water using chitosan/bentonite/MnO composite beads.

In the present study, a new composite adsorbent, chitosan/bentonite/manganese oxide (CBMnO) beads, cross-linked with tetraethyl-ortho-silicate (TEOS) was applied in a fixed-bed column for the removal of Mn (II) from water. The adsorbent was characterised by scanning electron microscopy (SEM), Fourier transform infra-red (FT-IR), N2 adsorption-desorption and X-ray photoelectron spectroscopy (XPS) techniques, and moreover the point of zero charge (pHpzc) was determined. The extend of Mn (II) breakthrough behaviour was investigated by varying bed mass, flow rate and influent concentration, and by using real environmental water samples. The dynamics of the column showed great dependency of breakthrough curves on the process conditions. The breakthrough time (tb), bed exhaustion time (ts), bed capacity (qe) and the overall bed efficiency (R%) increased with an increase in bed mass, but decreased with the increase in both influent flow rate and concentration. Non-linear regression suggested that the Thomas model effectively described the breakthrough curves while large-scale column performance could be estimated by the bed depth service time (BDST) model. Experiments with environmental water revealed that coexisting ions had little impact on Mn (II) removal, and it was possible to achieve 6.0 mg/g breakthrough capacity (qb), 4.0 L total treated water and 651 bed volumes processed with an initial concentration of 38.5 mg/L and 5.0 g bed mass. The exhausted bed could be regenerated with 0.001 M nitric acid solution within 1 h, and the sorbent could be reused twice without any significant loss of capacity. The findings advocate that CBMnO composite beads can provide an efficient scavenging pathway for Mn (II) in polluted water.

Batch equilibrium and kinetics of mercury removal from aqueous solutions using polythiophene/graphene oxide nanocomposite.

Polythiophene/graphene oxide (PTh/GO) nanocomposite (NC) was prepared through polymerisation of thiophene in the presence of GO and was used for mercury ions (Hg2+) adsorption in aqueous solutions. Equilibrium studies showed that mercury removal was strongly influenced by solution pH and GO composition in the NC. The equilibrium data were well described by both Langmuir and Freundlich isotherm models, with a Langmuir maximum adsorption capacity of 113.6 mg/g. Adsorption kinetics were rapid and correlated well with the pseudo-second-order model. The thermodynamic studies indicated that the adsorption was spontaneous and endothermic in nature, and occurred through a physicochemical mechanism. Desorption studies revealed that PTh/GO NC could be used repeatedly for three adsorption-desorption cycles without a significant loss in its capacity. Competing ions reduced mercury uptake although considerable values were still attained. The findings of this study suggest that PTh/GO NC is a potential adsorbent for Hg2+ removal from aqueous solutions.