Loading dendritic cells with PLA-p24 nanoparticles or MVA expressing HIV genes induces HIV-1-specific T cell responses.

Since recent data suggest that nanoparticles and modified vaccinia ankara (MVA) vectors could play a pivotal role in HIV-1 therapeutics and vaccine design, in an ex vivo model of human monocyte-derived dendritic cells (MDDCs), we compared two different loading strategies with HIV-1 vaccine vehicles, either viral or synthetic derived. We used polylactic acid (PLA) colloidal biodegradable particles, coated with HIV Gag antigens (p24), and MVA expressing Gag (rMVA-gag and rMVA-gag/trans membrane) or Tat, Nef and Rev genes (rMVA tat+rev and rMVA nef). PLA-p24 captured by MDDCs from HIV-1 individuals induced a slight degree of MDDC maturation, cytokine and chemokine secretion and migration towards a gradient of CCL19 chemokine and highly increased HIV-specific CD8(+) T-cell proliferation compared with p24 alone. After complete maturation induction of PLA-p24-pulsed MDDCs, maximal migration towards a gradient of CCL19 chemokine and induction of HIV-specific T-cell proliferation (two-fold higher for CD4(+) than CD8(+)) and cytokine secretion (IFN-γ and IL-2) in the co-culture were observed. Upon exposure to MVA-gag, MDDCs produced cytokines and chemokines and maintained their capacity to migrate to a gradient of CCL19. MDDCs infected with MVA-gag and MVA-gag trans-membrane were able to induce HIV-specific CD8(+) proliferation and secretion of IFN-γ, IL-2, IL-6 and TNF-α. We conclude that both HIV antigens loading strategies (PLA-p24 nanoparticles or MVA expressing HIV genes) induce HIV-1-specific T-cell responses, which are able to kill autologous gag-expressing cells. Thus, they are plausible candidates for the development of anti-HIV vaccines.

Particle-based transcutaneous administration of HIV-1 p24 protein to human skin explants and targeting of epidermal antigen presenting cells.

Transcutaneous immunization is a promising vaccination strategy for the treatment of infectious diseases and cancer. In this study, we investigate the combination of cyanoacrylate skin surface stripping (CSSS) and particle-based antigen delivery to target the HIV-1 p24 protein to skin antigen presenting cells (APC). The CSSS treatment pre-activates skin APC and opens hair follicles, where protein-loaded particles accumulate and allow for sustained delivery of the loaded antigen to perifollicular APC. We found that poly-lactic acid (PLA) and polystyrene (PS) particles targeted the adsorbed HIV-1 p24 protein to the hair follicles. Small amounts of PS and PLA particles were found to translocate to the epidermis and be internalized by skin cells, whereas most of the particles aggregated in the hair follicle canal, where they released the loaded antigen. The p24 protein diffused to the epidermis and dermis and was detected in skin cells, especially in Langerhans cells and dermal dendritic cells. Furthermore, the combination of CSSS and particle-based delivery resulted in activation and maturation of Langerhans cells (HLA-DR, CD80 and CD83). We conclude that particle-based antigen delivery across partially disrupted skin barrier is a feasible and effective approach to needle-free transcutaneous vaccination.

Intradermal immunization triggers epidermal Langerhans cell mobilization required for CD8 T-cell immune responses.

The potential of the skin immune system for the generation of both powerful humoral and cellular immune responses is now well established. However, the mechanisms responsible for the efficacy of skin antigen-presenting cells (APCs) during intradermal (ID) vaccination still remain to be elucidated. We have previously demonstrated in clinical trials that preferential targeting of Langerhans cells (LCs) by transcutaneous immunization shapes the immune response toward vaccine-specific CD8 T cells. Others have shown that ID inoculation of a vaccine, which targets dermal APCs, mobilizes both the cellular and humoral arms of immunity. Here, we investigated the participation of epidermal LCs in response to ID immunization. When human or mouse skin was injected ID with a particle-based vaccine, we observed significant modifications in the morphology of epidermal LCs and their mobilization to the dermis. We further established that this LC recruitment after ID administration was essential for the induction of antigen-specific CD8 T cells, but was, however, dispensable for the generation of specific CD4 T cells and neutralizing antibodies. Thus, epidermal and dermal APCs shape the outcome of the immune responses to ID vaccination. Their combined potential provides new avenues for the development of vaccination strategies against infectious diseases.

Targeting of HIV-p24 particle-based vaccine into differential skin layers induces distinct arms of the immune responses.

Skin routes of immunization such as subcutaneous (SC), intradermal (ID) and transcutaneous (TC) administration are utilized for vaccination against various pathogens, without understanding their potential impact on the outcome of immune responses. We demonstrated that SC immunization induced HIV-1 p24 specific IgG in absence of antigen-specific CD8 T cells, whereas the ID route induced both cellular and humoral responses. Interestingly, TC application through empty hair follicular ducts, targeting epidermal Langerhans Cells (LCs), induced major CD8 effector cells, in the absence of IgG. However, high levels of mucosal IgA, were localized in the stratified epithelium of the vagina after TC prime. We propose that re-directing the immune responses by targeting differential skin immunization routes, offers enormous potential for innovative vaccination strategies, especially against HIV.

Towards biocompatible vaccine delivery systems: interactions of colloidal PECs based on polysaccharides with HIV-1 p24 antigen.

This work reports on the interactions of a model protein (p24, the capside protein of HIV-1 virus) with colloids obtained from polyelectrolyte complexes (PECs) involving two polysaccharides: chitosan and dextran sulfate (DS). The PECs were elaborated by a one-shot addition of default amounts of one counterpart to the polymer in excess. Depending on the nature of the excess polyelectrolyte, the submicrometric colloid was either positively or negatively charged. HIV-1 capsid p24 protein was chosen as antigen, the ultrapure form, lipopolysaccharide-free (endotoxin-, vaccine grade) was used in most experiments, as the level of purity of the protein had a great impact on the immobilization process. p24 sorption kinetics, isotherms, and loading capacities were investigated for positively and negatively charged particles of chitosans and dextran sulfates differing in degrees of polymerization (DP) or acetylation (DA). Compared with the positive particles, negatively charged colloids had higher binding capacities, faster kinetics, and a better stability of the adsorbed p24. Capacities up to 600 mg x g(-1) (protein-colloid) were obtained, suggesting that the protein interacted within the shell of the particles. Small-angle X-rays scattering experiments confirmed this hypothesis. Finally, the immunogenicity of the p24-covered particles was assessed for vaccine purposes in mice. The antibody titers obtained with immobilized p24 was dose dependent and in the same range as for Freund's adjuvant, a gold standard for humoral responses.

Formulation of HIV-1 Tat and p24 antigens by PLA nanoparticles or MF59 impacts the breadth, but not the magnitude, of serum and faecal antibody responses in rabbits.

Biodegradable nanoparticles coated with proteins represent a promising method for in vivo delivery of vaccines. Here we used a rabbit model to compare quantitatively and qualitatively the antibody responses induced by poly(D,L-lactide) nanoparticles (PLA) and by emulsion adjuvant MF59 using three HIV-1 antigens: p24gag, WT Tat and a mutated, detoxified form of Tat. We could show that all antigens and adjuvants lead to the induction of similar level of IgG titres in serum when injected subcutaneously. p24, but not Tat, could also induce faecal IgG in rabbits when formulated with PLA or MF59. The nature of the adjuvant had consequences on the spectrum of specificity induced, depending on the antigen: PLA adjuvant focussed the anti-p24 response to an immunodominant domain when compared to MF59. With wild-type Tat, no difference between adjuvants was observed in the spectrum of specificity induced. On the opposite, detoxified Tat coated on PLA increased the number of epitopes recognized by serum IgG compared to MF59 adjuvantation. The impact of these qualitative differences depending on the antigen/adjuvant associations will be important to take into account for further designs of vaccinal formulation using particulate adjuvants.

Design and characterization of an HIV-1 Tat mutant: inactivation of viral and cellular functions but not antigenicity.

Among HIV-1 proteins, Tat is a promising antigen for consideration as a component of anti-HIV-1 vaccine formulations. Nevertheless, this viral protein is able to affect the expression of several cellular genes that are implicated in immune response. In this study, we designed and characterized a mutant form of Tat ("STLA Tat"), which is unable to transactivate viral transcription, and which has lost the deleterious effects on the expression of MHC I, IL-2, and CD25 genes compared with wild-type Tat, as observed in lymphoid Jurkat cells that stably express the tat genes. In vivo experiments in mice revealed that STLA Tat induces anti-Tat antibodies at the same titers as wild-type Tat, which recognize both autologous and heterologous Tat antigens. Finally, STLA Tat did not induce the immunosuppression observed after injection of wild-type Tat. Therefore, this STLA Tat mutant appears to be a safe and promising antigen for further evaluation in anti-HIV-1 vaccine strategies.

Coadsorption of HIV-1 p24 and gp120 proteins to surfactant-free anionic PLA nanoparticles preserves antigenicity and immunogenicity.

Biodegradable micro- or nanoparticles with surface adsorbed antigens represent a promising method for in vivo delivery of vaccines. Most vaccines, licensed or under development, are based on combined delivery of multiple antigens. Thus, we investigated the feasibility of combining two vaccine antigens, HIV-1 p24 and gp120 proteins, on the surface of surfactant-free anionic PLA nanoparticles obtained by an improved solvent diffusion method. The analysis of adsorption isotherms has shown that both proteins had similar and high affinities for the nanoparticles. Coadsorption of p24 and gp120 onto the same PLA particle was evidenced by sandwich ELISA, using antibodies directed against one protein for particle capture and the other one for detection. To assess structural integrity, the antigenicity of free and PLA-adsorbed antigens was compared by competition ELISA, using a set of 6 anti-p24 and 7 anti-gp120 antibodies, as well as soluble CD4. The antigenicity of proteins on the nanoparticle surface was well preserved, adsorbed either individually or in combination. Furthermore, both antigens maintained their immunogenicity, since high antibody titres (10(6) for p24 and 10(5) for gp120) were elicited in mice with monovalent and divalent PLA formulations. Taken together our results show that development of multivalent vaccines based on anionic PLA nanoparticles is possible. Moreover, coadsorption of a ligand for cell-specific targeting or of an immunostimulatory molecule will further extend the field of application of delivery systems based on charged micro- and nanoparticles.

Surfactant-free anionic PLA nanoparticles coated with HIV-1 p24 protein induced enhanced cellular and humoral immune responses in various animal models.

Microparticles and nanoparticles prepared with poly(D,L-lactide-co-glycolide) (PLGA) or poly(D,L-lactide) (PLA) polymers represent a promising method for in vivo delivery of encapsulated peptide, protein or DNA antigens. However, one major issue that limits the potential of these delivery systems is the instability or the degradation of the entrapped antigen. Charged microparticles carrying surface adsorbed antigen were developed to resolve this problem and appear more suitable for vaccine applications. We describe here new anionic PLA nanoparticles obtained by the dialysis method that are absolutely surfactant-free, which makes them more appropriate for use in humans. The potency of this delivery system as a vaccine carrier was tested in various animal models using HIV-1 p24 protein. p24-coated PLA nanoparticles (p24/PLA) induced high antibody titres (>10(6)) in mice, rabbits and macaques. Moreover, p24/PLA nanoparticles elicited strong CTL responses and a Th1-biased cytokine release (IFNgamma, IL-2) in mice. p24 protein seemed to generate a more Th1-oriented response when administered coated onto the surface of PLA nanoparticles than adjuvanted with Freund's adjuvant. Most importantly, the ability of p24/PLA particles to induce Th1 responses was also confirmed in the macaque model, since high levels of IFNgamma-producing CD4+ T cells and CD8+ T cells could be detected by the ELISPOT assay. This protein delivery system confirms the potential of charged nanoparticles in the field of vaccine development.

Cationic PLA nanoparticles for DNA delivery: comparison of three surface polycations for DNA binding, protection and transfection properties.

Biodegradable cationic nanoparticles (cNP) made of poly(lactide) (PLA) have been shown to be promising carrier systems for in vivo DNA delivery and immunization. In previous work, we have described a versatile approach for the elaboration of cationic PLA cNP based on the use of pre-formed particles and subsequent adsorption of a model polycation, the poly(ethylenimine) (PEI). Here, we evaluated two more polycations, chitosan and poly(2-dimethyl-amino)ethyl methacrylate (pDMAEMA)) to determine the most suitable one for the development of PLA cNP as DNA carriers. Cationic PLA-PEI, PLA-chitosan and PLA-pDMAEMA nanoparticles were compared for interaction with plasmid DNA and, more importantly, with regards to the biological properties of bound DNA. pDMAEMA coating yielded the most positively charged nanoparticles with the highest DNA binding capacity (32 mg/g). Loaded with DNA, all three cNP were in the same size range ( approximately 500 nm) and had a negative zeta potential (-50 mV). PLA-chitosan was the only cNP that released DNA at pH 7; the two others required higher pH. Adsorption and release from cNP did not alter structural and functional integrity of plasmid DNA. Moreover, DNA coated onto cNP was partially protected from nuclease degradation, although this protection was less efficient for PLA-chitosan than others. The highest transfection efficiency in cell culture was obtained with PLA-pDMAEMA carriers. We have shown that at least three different cationic polymers (chitosan, PEI, pDMAEMA) can be used for the production of PLA-based particulate DNA carriers and most probably other cationic polymers can also be used in the same purpose. PLA-pDMAEMA cNP were the most promising system for DNA delivery in this in vitro study. Our future work will focus on the in vivo evaluation of these gene delivery systems.