Physical Treatments to Control Clostridium botulinum Hazards in Food.

Clostridium botulinum produces Botulinum neurotoxins (BoNTs), causing a rare but potentially deadly type of food poisoning called foodborne botulism. This review aims to provide information on the bacterium, spores, toxins, and botulisms, and describe the use of physical treatments (e.g., heating, pressure, irradiation, and other emerging technologies) to control this biological hazard in food. As the spores of this bacterium can resist various harsh environmental conditions, such as high temperatures, the thermal inactivation of 12-log of C. botulinum type A spores remains the standard for the commercial sterilization of food products. However, recent advancements in non-thermal physical treatments present an alternative to thermal sterilization with some limitations. Low- (<2 kGy) and medium (3-5 kGy)-dose ionizing irradiations are effective for a log reduction of vegetative cells and spores, respectively; however, very high doses (>10 kGy) are required to inactivate BoNTs. High-pressure processing (HPP), even at 1.5 GPa, does not inactivate the spores and requires heat combination to achieve its goal. Other emerging technologies have also shown some promise against vegetative cells and spores; however, their application to C. botulinum is very limited. Various factors related to bacteria (e.g., vegetative stage, growth conditions, injury status, type of bacteria, etc.) food matrix (e.g., compositions, state, pH, temperature, aw, etc.), and the method (e.g., power, energy, frequency, distance from the source to target, etc.) influence the efficacy of these treatments against C. botulinum. Moreover, the mode of action of different physical technologies is different, which provides an opportunity to combine different physical treatment methods in order to achieve additive and/or synergistic effects. This review is intended to guide the decision-makers, researchers, and educators in using physical treatments to control C. botulinum hazards.

Confocal spectral microscopy, a non-destructive approach to follow contamination and biofilm formation of mCherry Staphylococcus aureus on solid surfaces.

Methods to test the safety of wood material for hygienically sensitive places are indirect, destructive and limited to incomplete microbial recovery via swabbing, brushing and elution-based techniques. Therefore, we chose mCherry Staphylococcus aureus as a model bacterium for solid and porous surface contamination. Confocal spectral laser microscope (CSLM) was employed to characterize and use the autofluorescence of Sessile oak (Quercus petraea), Douglas fir (Pseudotsuga menziesii) and poplar (Populus euramericana alba L.) wood discs cut into transversal (RT) and tangential (LT) planes. The red fluorescent area occupied by bacteria was differentiated from that of wood, which represented the bacterial quantification, survival and bio-distribution on surfaces from one hour to one week after inoculation. More bacteria were present near the surface on LT face wood as compared to RT and they persisted throughout the study period. Furthermore, this innovative methodology identified that S. aureus formed a dense biofilm on melamine but not on oak wood in similar inoculation and growth conditions. Conclusively, the endogenous fluorescence of materials and the model bacterium permitted direct quantification of surface contamination by using CSLM and it is a promising tool for hygienic safety evaluation.

Survival of Bacterial Strains on Wood (Quercus petraea) Compared to Polycarbonate, Aluminum and Stainless Steel.

Healthcare-associated infections (HAI) remain a burden in healthcare facilities, environmental surfaces being a potential reservoir for healthcare-associated pathogens. In this context, exploration of materials with potential antimicrobial activities represents a way forward for the future. Here, we explored the survival of four bacterial species commonly involved in HAI (Acinetobacter baumannii, Enterococcus faecalis, Klebsiella pneumoniae, Staphylococcus aureus), on oak versus three other materials (aluminum, polycarbonate, stainless steel). Twenty microliters of each bacterial suspension (approximatively 107 bacteria) were deposited on each material. Bacterial counts were measured by grinding and culturing on day 0, 1, 2, 6, 7 and 15. Analyses were performed in triplicate for each material and each time evaluated. It appeared that the bacteria viable count decreased rapidly on transversal and tangential oak compared with the other materials for all bacterial species. Furthermore, no difference was noticed between transversal and tangential oak. These results underline the potential for use of oak materials in healthcare facilities, a consideration that should be supported by further investigations.

Experimental Parameters Influence the Observed Antimicrobial Response of Oak Wood (Quercus petraea).

The present investigation aimed to utilize a direct wood disc diffusion method to study the influence of plane of cutting, cutting method, sterilization method, and origin of tree on the antimicrobial activity of wood material. Six oak wood trees (Quercus petraea) were collected from 3 different locations in France. They were cut into 4 mm thick slices with either transverse (RT), tangential (LT) or radial (LR) faces. Round discs (diameter 9.95 ± 0.1 mm) were cut from the slices via a laser machine or a manual punch machine, and were sterilized with gamma irradiation (25 kGy) or autoclaving (121 °C). The antimicrobial activity of wood was tested using a direct diffusion method against Staphylococcus aureus and Acinetobacter baumannii isolates. The zone of inhibition around the wooden disc was recorded following the recommendations used for antibiotics tests. The results showed that S. aureus was more susceptible than A. baumannii, to the chemicals that diffused from the wood. The transverse face discs exhibited higher antimicrobial activity. Samples that had been sterilized by autoclaving showed significantly (p < 0.05) lower antimicrobial activity, whereas the cutting method and origin of tree did not influence the antimicrobial activity of wood material. Therefore, the choice of sterilization method and cutting planes must be taken into account while studying and interpreting the antibacterial properties of wood material.

Control of Foodborne Biological Hazards by Ionizing Radiations.

Ionization radiations are used to ensure food safety and quality. This irradiation process uses ions of beta or gamma rays to inactivate or destroy the food spoilage pests, microorganisms and their toxins without significantly increasing the temperature of the treated product. Meanwhile, various intrinsic and extrinsic factors are involved in determining the efficacy of ionization irradiation against these organisms. Therefore, the dose of radiations is recommended according to the type of irradiation, substrate and microorganisms. However, controversies are surrounding the use of irradiations in the food industry due to a negative perception of irradiations. This manuscript described the use of ionization radiations to control the foodborne biological hazards and increase shelf life. Firstly, the characteristics and mode of action of irradiations were discussed. Secondly, the role of extrinsic and intrinsic factors influencing the radioresistance of biological hazards were elaborated. This literature review also detailed the differential effects of irradiations on different microorganisms and pests having a role in food safety and deterioration. Finally, the regulatory status and the consumer values along with the controversies surrounding the use of ionization irradiations in the food sector were explained.

Testing the Antimicrobial Characteristics of Wood Materials: A Review of Methods.

Some wood species have antimicrobial properties, making them a better choice over inert surfaces in certain circumstances. However, the organic and porous nature of wood raises questions regarding the use of this material in hygienically important places. Therefore, it is reasonable to investigate the microbial survival and the antimicrobial potential of wood via a variety of methods. Based on the available literature, this review classifies previously used methods into two broad categories: one category tests wood material by direct bacterial contact, and the other tests the action of molecules previously extracted from wood on bacteria and fungi. This article discusses the suitability of these methods to wood materials and exposes knowledge gaps that can be used to guide future research. This information is intended to help the researchers and field experts to select suitable methods for testing the hygienic safety and antimicrobial properties of wood materials.

Prevalence of Coccidiosis in Free-Range Chicken in Sidi Thabet, Tunisia.

Background. Enteric diseases are an important concern to the poultry industry and coccidiosis is imposing a significant economic burden worldwide. Objectives. The main goal of the present study was to investigate the prevalence of coccidiosis in free-range chicken in Sidi Thabet, northeast Tunisia. Methods. Six hundred and thirty free-range chickens along with fecal samples were collected from 15 flocks in this region and two hundred chickens were found positive for oocysts of Eimeria spp. Intestines were dissected and examined for macroscopic lesions. The mucosa of small intestine and the caeca were examined for the presence and identification of parasitic forms using parasitology methods. The mean lesion scores were usually low (<2+) in different intestinal portions of different types of chicken and high scores (>2+) were attributed mainly to the caeca. Results. The overall rate of coccidiosis was 31.8%: E. tenella (61.5%), E. maxima (12%), and E. acervulina (1.5%). Mixed Eimeria species infection was observed with overall prevalence 26.5%. There was a statistically significant difference (P < 0.05) among infection rates, age groups, season, diarrhea, and type of chicken. Conclusion. This is the first report of coccidiosis rate in free-range chicken in this region. Further additional studies are needed to develop better preventive measures against coccidiosis in the country.

Role of Wheat Based Diet on the Pathology of Necrotic Enteritis in Turkeys.

The study was conducted to investigate the effects of wheat based diet on the pathology of necrotic enteritis in turkeys. Turkeys were divided into four groups. Groups A and B were kept as noninoculated and fed normal commercial diet while groups C and D were challenged orally with C. perfringens and fed wheat based diet to promote the development of experimental disease. Infected turkeys showed clinical signs of depression, ruffled feathers, and dark yellowish faeces showing the most prominent disease signs in turkeys of group D with 30% mortality. Similarly, turkeys of group D showed more striking gross and histopathologic lesions as compared to turkeys of group C. The most severe gross lesions comprised intestinal distension, small necrotic spots and haemorrhages on intestine, fragile intestinal wall, and gas bubble formation in the small intestine. Histologically, inoculated turkeys showed patchy necrosis, desquamation of intestinal epithelium, and intense leukocyte infiltration in the intestine. Microscopic examination showed significant decrease in the height of intestinal villi of inoculated birds. Haematological studies showed significant influence of necrotic enteritis on the blood profile of turkeys in group D. The findings revealed that simultaneous feeding of wheat enhanced the pathology of necrotic enteritis in turkeys.

Role of aflatoxin toxicity on transmissibility and pathogenicity of H9N2 avian influenza virus in turkeys.

The study was conducted to investigate the role of aflatoxin on the infectivity and transmissibility of H9N2 AI virus. The experiment was performed on 80 non-vaccinated turkeys, divided into 4 groups of 20 birds each. Group A was kept as non-infected and a non-treated negative control; Group B was inoculated intratracheally with H9N2 AI virus (1 × 10(7) EID50) at 4 weeks of age; Group C was fed on a diet containing 0.5 ppm aflatoxin from Day 1 through the entire experiment period and Group D was fed on diet containing 0.5 ppm aflatoxin as for Group C but inoculated intratracheally with H9N2 AI virus (1 × 10(7) EID50) at the fourth week of age and then mixed with naïve birds. Infected and contact birds showed clinical signs of different severity, showing the most prominent disease signs in birds of the aflatoxin + H9N2 group. All infected birds showed virus shedding, however, the pattern of virus shedding was different for birds of the aflatoxin + H9N2 group showing pronounced virus secretion. Similarly, efficient transmission of virus was observed between infected and contact birds, but more prominent virus transmission was seen in those birds inoculated and fed aflatoxin-treated diet. Moreover, significantly lower antibody titres against H9N2 AIV were observed in birds fed aflatoxin-treated diet, indicating an immunotoxic nature of aflatoxin as the reason for poor seroconversion. Similarly, decreased IFNγ mRNA expression and higher mortality (35%) suggest an immunotoxic and immunosuppressive effect of aflatoxin leading to enhanced pathogenesis of H9N2 viruses in aflatoxin-fed birds. The immunosuppressive nature of aflatoxin might delay influenza virus clearance and this may be one of the reasons for increased pathogenicity of H9N2 LPAI viruses in turkeys under field conditions.