Evaluation of poly(lactic acid) and ECOVIO based biocomposites loaded with antimicrobial sodium phosphate microparticles.

Herein, biobased composite materials based on poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) as matrices, sodium hexametaphosphate microparticles (E452i, food additive microparticles, 1 and 5 wt%) as antimicrobial filler and acetyl tributyl citrate (ATBC, 15 wt%) as plasticizer, were developed for potential food packaging applications. Two set of composite films were obtained by melt-extrusion and compression molding, i) based on PLA matrix and ii) based on Ecovio® matrix (PLA/PBAT blend). Thermal characterization by thermogravimetric analysis and differential scanning calorimetry demonstrated that the incorporation of E452i particles improved thermal stability and crystallinity, while the mechanical test showed an increase in the Young's modulus. E452i particles also provide antimicrobial properties to the films against food-borne bacteria Listeria innocua and Staphylococcus aureus, with bacterial reduction percentages higher than 50 % in films with 5 wt% of particles. The films also preserved their disintegradability as demonstrated by an exhaustive characterization of the films under industrial composting conditions. Therefore, the results obtained in this work reveal the potential of these biocomposites as appropriated materials for antibacterial and compostable food packaging films.

Synthesis and characterization of thiazolium chitosan derivative with enhanced antimicrobial properties and its use as component of chitosan based films.

In this work, chemical modification of chitosan using cationic thiazolium groups was investigated with the aim to improve water solubility and antimicrobial properties of chitosan. Enzymatic synthesis and ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) chemistry were employed to synthesize and attach to chitosan through the amine groups the molecule bearing thiazolium moieties, quaternized 4-(2-(4-methylthiazol-5-yl) ethoxy)-4-oxobutanoic acid (MTBAQ). On the basis of Fourier transform infrared spectroscopy (FTIR), elemental analysis and solid state nuclear magnetic resonance (ssNMR), around 95 % of the available amine groups of chitosan (of 25 % degree of acetylation) reacted. The resulting derivative was water soluble at physiological pH and exhibit excellent antimicrobial activity against Listeria innocua, Staphylococcus epidermidis, Staphylococcus aureus and Methicillin Resistant S. aureus Gram-positive bacteria (MIC = 8-32 µg/ mL), whereas its efficiency decreases against fungi Candida albicans and Eschericia coli Gram-negative bacterium. Subsequently, the thiazolium chitosan derivative was employed as antimicrobial component (up to 7 wt%) of chitosan/glycerol based films. The incorporation of the chitosan derivative does not modify significantly the characteristics of the film in terms of thermal and mechanical properties, while enhances considerably the antimicrobial activity.

PLA and PBAT-Based Electrospun Fibers Functionalized with Antibacterial Bio-Based Polymers.

Antimicrobial fibers based on biodegradable polymers, poly(lactic acid) (PLA), and poly(butylene adipate-co-terephthalate) (PBAT) are prepared by electrospinning. For this purpose, a biodegradable/bio-based polyitaconate containing azoles groups (PTTI) is incorporated at 10 wt.% into the electrospinning formulations. The resulting fibers functionalized with azole moieties are uniform and free of beads. Then, the accessible azole groups are subjected to N-alkylation, treatment that provides cationic azolium groups with antibacterial activity at the surface of fibers. The positive charge density, roughness, and wettability of the cationic fibers are evaluated and compared with flat films. It is confirmed that these parameters exert an important effect on the antimicrobial properties, as well as the length of the alkylating agent and the hydrophobicity of the matrix. The quaternized PLA/PTTI fibers exhibit the highest efficiency against the tested bacteria, yielding a 4-Log reduction against S. aureus and 1.7-Log against MRSA. Then, biocompatibility and bioactivity of the fibers are evaluated in terms of adhesion, morphology and viability of fibroblasts. The results show no cytotoxic effect of the samples, however, a cytostatic effect is appreciated, which is ascribed to the strong electrostatic interactions between the positive charge at the fiber surface and the negative charge of the cell membranes.

Direct 3D printing of zero valent iron@polylactic acid catalyst for tetracycline degradation with magnetically inducing active persulfate.

Catalyst stability has become a challenging issue for advanced oxidation processes (AOPs). Herein, we report an alternative method based on 3D printing technology to obtain zero-valent iron polylactic acid prototypes (ZVI@PLA) in a single step and without post etching treatment. ZVI@PLA was used to activate persulfate (PS) for the removal of Tetracycline (TC) in recirculating mode under two different heating methodologies, thermal bath and contactless heating promoted by magnetic induction (MIH). The effect of both heating methodologies was systematically analysed by comparing the kinetic constant of the degradation processes. It was demonstrated that the non-contact heating of ZVI by MIH reactivates the surface of the catalyst, renewing the surface iron content exposed to the pollutant solution, which makes the ZVI@PLA catalyst reusable up to 10 cycles with no efficiency reduction. In contrast, by using a conventional thermal bath, the kinetic constant gradually decreases over the 10 cycles, because of the superficial iron consumption, being the kinetic constant 5 times lower in the 10th run compared to MIH experiment. X-ray diffraction and Mössbauer spectroscopy confirmed the presence of metallic iron embedded in the ZVI@PLA prototype, whose crystalline structure remained unchanged for 10th cycles of MIH. Moreover, it was proven that with no contact heating technology at low magnetic fields (12.2 mT), the solution temperature does not increase, but only the surface of the catalyst does. Under these superficial heated conditions, kinetic rate is increased up to 0.016 min-1 compared to the value of 0.0086 min-1 obtained for conventional heating at 20 °C. This increase is explained not only by PS activation by iron leaching but also by the contribution of ZVI in the heterogeneous activation of persulfate.

Electrospun Polylactic Acid-Based Fibers Loaded with Multifunctional Antibacterial Biobased Polymers.

Here, we report the development of antibacterial and compostable electrospun polylactic acid (PLA) fibers by incorporation of a multifunctional biobased polymer in the process. The multifunctional polymer was synthesized from the bio-sourced itaconic acid building block by radical polymerization followed by click chemistry reaction with hydantoin groups. The resulting polymer possesses triazole and hydantoin groups available for further N-alkylation and chlorination reaction, which provide antibacterial activity. This polymer was added to the electrospinning PLA solution at 10 wt %, and fiber mats were successfully prepared. The obtained fibers were surface-modified through the accessible functional groups, leading to the corresponding cationic triazolium and N-halamine groups. The fibers with both antibacterial functionalities demonstrated high antibacterial activity against Gram-positive and Gram-negative bacteria. While the fibers with cationic surface groups are only effective against Gram-positive bacteria (Staphylococcus epidermidis and Staphylococcus aureus), upon chlorination, the activity against Gram-negative Escherichia coli and Pseudomonas aeruginosa is significantly improved. In addition, the compostability of the electrospun fibers was tested under industrial composting conditions, showing that the incorporation of the antibacterial polymer does not impede the disintegrability of the material. Overall, this study demonstrates the feasibility of this biobased multifunctional polymer as an antibacterial agent for biodegradable polymeric materials with potential application in medical uses.

Hemolytic and Antimicrobial Activities of a Series of Cationic Amphiphilic Copolymers Comprised of Same Centered Comonomers with Thiazole Moieties and Polyethylene Glycol Derivatives.

A series of well-defined antimicrobial polymers composed of comonomers bearing thiazole ring (2-(((2-(4-methylthiazol-5-yl)ethoxy)carbonyl)oxy)ethyl methacrylate monomer (MTZ)) and non-hemotoxic poly(ethylene glycol) side chains (poly(ethylene glycol) methyl ether methacrylate (PEGMA)) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. By post-polymerization functionalization strategy, polymers were quaternized with either butyl or octyl iodides to result in cationic amphiphilic copolymers incorporating thiazolium groups, thus with variable hydrophobic/hydrophilic balance associated to the length of the alkylating agent. Likewise, the molar percentage of PEGMA was modulated in the copolymers, also affecting the amphiphilicity. The antimicrobial activities of these cationic polymers were determined against Gram-positive and Gram-negative bacteria and fungi. Minimum inhibitory concentration (MIC) was found to be dependent on both length of the alkyl hydrophobic chain and the content of PEGMA in the copolymers. More hydrophobic octylated copolymers were found to be more effective against all tested microorganisms. The incorporation of non-ionic hydrophilic units, PEGMA, reduces the hydrophobicity of the system and the activity is markedly reduced. This effect is dramatic in the case of butylated copolymers, in which the hydrophobic/hydrophilic balance is highly affected. The hemolytic properties of polymers analyzed against human red blood cells were greatly affected by the hydrophobic/hydrophilic balance of the copolymers and the content of PEGMA, which drastically reduces the hemotoxicity. The copolymers containing longer hydrophobic chain, octyl, are much more hemotoxic than their corresponding butylated copolymers.

Honeycomb Films with Core-Shell Dispersed Phases Prepared by the Combination of Breath Figures and Phase Separation Process of Ternary Blends.

Herein, we propose a strategy to fabricate core-shell microstructures ordered in hexagonal arrays by combining the breath figures approach and phase separation of immiscible ternary blends. This simple strategy to fabricate these structures involves only the solvent casting of a ternary polymer blend under moist atmosphere, which provides a facile and low-cost fabrication method to obtain the porous structures with a core-shell morphology. For this purpose, blends consisting of polystyrene (PS) as a major component and PS40-b-P(PEGMA300)48 amphiphilic copolymer and polydimethylsiloxane (PDMS) as minor components were dissolved in tetrahydrofuran and cast onto glass wafers under humid conditions, 70% of relative humidity. The resulting porous morphologies were characterized by optical and confocal Raman microscopy. In particular, confocal Raman results demonstrated the formation of core-shell morphologies into the ordered pores, in which the PS forms the continuous matrix, whereas the other two phases are located into the cavities (PDMS is the core while the amphiphilic copolymer is the shell). Besides, by controlling the weight ratio of the polymer blends, the structural parameters of the porous structure such as pore diameter and the size of the core can be effectively tuned.

Immobilization of Stimuli-Responsive Nanogels onto Honeycomb Porous Surfaces and Controlled Release of Proteins.

In this article, we describe the formation of functional honeycomb-like porous surfaces fabricated by the breath figures technique using blends of either amino-terminated poly(styrene) or a poly(styrene)-b-poly(acrylic acid) block copolymer with homopoly(styrene). Thus, the porous interfaces exhibited either amino or acid groups selectively located inside of the holes, which were subsequently employed to anchor stimuli-responsive nanogels by electrostatic interactions. These nanogels were prepared from poly(N-isopropylacrylamide) (PNIPAM) cross-linked with dendritic polyglycerol (dPG) and semi-interpenetrated with either 2-(dimethylamino)ethyl methacrylate (DMAEMA) or 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) to produce positively and negatively charged nanogel surfaces, respectively. The immobilization of these semi-interpenetrated networks onto the surfaces allowed us to have unique stimuli-responsive surfaces with both controlled topography and composition. More interestingly, the surfaces exhibited stimuli-responsive behavior by variations on the pH or temperature. Finally, the surfaces were evaluated regarding their capacity to induce a thermally triggered protein release at temperatures above the cloud point temperature (T(cp)) of the nanogels.

Enzymatic Catalysis Combining the Breath Figures and Layer-by-Layer Techniques: Toward the Design of Microreactors.

Herein, we report the fabrication of microstructured porous surfaces with controlled enzymatic activity by combining the breath figures and the layer-by-layer techniques. Two different types of porous surfaces were designed based on fluorinated and carboxylated copolymers in combination with PS, using poly(2,3,4,5,6-pentafluorostyrene)-b-polystyrene (PS5F31-b-PS21) and polystyrene-b-poly(acrylic acid) (PS19-b-PAA10) block copolymers, respectively. For comparative purposes, flat surfaces having similar chemistry were obtained by spin-coating. Poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) multilayers incorporating alkaline phosphatase (ALP) were built on these porous surfaces to localize the enzyme both inside and outside of the pores using PS/PS5F31-b-PS21 surfaces and only inside the pores on PS/PS19-b-PAA10 surfaces. A higher catalytic activity of ALP (about three times) was obtained with porous surfaces compared to the flat ones. The catalysis happens specifically inside the holes of PS/PS19-b-PAA10surfaces, where ALP is located. This opens the route for applications in microreactors.

Dendritic amphiphiles as additives for honeycomb-like patterned surfaces by breath figures: role of the molecular characteristics on the pore morphology.

The current study presents a library of honeycomb-like patterned surfaces developed from a variety of different water-soluble amphiphilic dendrons. When compared to commercial surfactants, the dendrons produce a wide variety of porous surfaces due to their well-defined branched structure. Different functionalities and generations of dendrons have been studied. A singular hierarchical distribution of the dendrons, forming small nanoparticles (micelles) only at the inner edges of the holes (coffee stain effect) is observed. Once the surfaces are fabricated, these dendrons can be easily recovered via simple aqueous washing. After this treatment, the surfaces exhibit a high hydrophobic character (up to 140°) due to the high porosity. This behavior can be described by the Cassie-Baxter model.