Variation in Metal-Support Interaction with TiO2 Loading and Synthesis Conditions for Pt-Ti/SBA-15 Active Catalysts in Methane Combustion.

The control of catalytic performance using synthesis conditions is one of the main goals of catalytic research. Two series of Pt-Ti/SBA-15 catalysts with different TiO2 percentages (n = 1, 5, 10, 30 wt.%) were obtained from tetrabutylorthotitanate (TBOT) and peroxotitanate (PT), as titania precursors and Pt impregnation. The obtained catalysts were characterized using X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), N2 sorption, Raman, X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), hydrogen temperature-programmed reduction (H2-TPR) and H2-chemisorption measurements. Raman spectroscopy showed framework titanium species in low TiO2 loading samples. The anatase phase was evidenced for samples with higher titania loading, obtained from TBOT, and a mixture of rutile and anatase for those synthesized by PT. The rutile phase prevails in rich TiO2 catalysts obtained from PT. Variable concentrations of Pt0 as a result of the stronger interaction of PtO with anatase and the weaker interaction with rutile were depicted using XPS. TiO2 loading and precursors influenced the concentration of Pt species, while the effect on Pt nanoparticles' size and uniform distribution on support was insignificant. The Pt/PtO ratio and their concentration on the surface were the result of strong metal-support interaction, and this influenced catalytic performance in the complete oxidation of methane at a low temperature. The highest conversion was obtained for sample prepared from PT with 30% TiO2.

Antibacterial Activity of ZnSe, ZnSe-TiO2 and TiO2 Particles Tailored by Lysozyme Loading and Visible Light Irradiation.

ZnSe, ZnSe-TiO2 microspheres and nanostructured TiO2 obtained by hydrothermal and sol-gel methods were tested against Staphylococcus aureus ATCC 25923 and Micrococcus lysodeikticus ATCC 4698 before and after lysozyme (Lys) loading. Morphological characterization of inorganic matrices and hybrid organic-inorganic complexes were performed by microscopy techniques (SEM, AFM and Dark Field Hyperspectral Microscopy). Light absorption properties of ZnSe, ZnSe-TiO2 and TiO2 powders were assessed by UV-visible spectroscopy and their ability to generate reactive oxygen species (•OH and O2•-) under visible light irradiation was investigated. Antibacterial activity of ZnSe, ZnSe-TiO2, TiO2, Lys/ZnSe, Lys/ZnSe-TiO2 and Lys/TiO2 samples under exposure to visible light irradiation (λ > 420 nm) was tested against Staphylococcus aureus and Micrococcus lysodeikticus and correlated with ROS photogeneration.

Formulation of Chewable Tablets Containing Carbamazepine-ß-cyclodextrin Inclusion Complex and F-Melt Disintegration Excipient. The Mathematical Modeling of the Release Kinetics of Carbamazepine.

Due to its low solubility, carbamazepine (CBZ) exhibits slow and incomplete release in the gastrointestinal tract and, hence, variable pharmacokinetics and pharmacodynamic effect. Lots of methods have been devised to improve its solubility, the large number of proposed solutions being a sign that the problem is not yet satisfactorily solved. The persistent problem is that predictable release kinetics, an increased rate but within defined limits, are required to avoid high absorption variability. This paper presents a synthesis of a carbamazepine-ß-cyclodextrin inclusion complex (CBZ-ß-CD), the characterization of the physical mixture, CBZ, ß-CD and the CBZ-ß-CD inclusion complex using Fourier transform infrared spectroscopy, scanning electron microscopy, simultaneous thermal analysis and X-ray diffraction, formulation of chewable tablets, determination of the dissolution of carbamazepine in medium containing 1% sodium lauryl sulfate (LSS), and in simulated saliva (SS), mathematical modeling of release kinetics. The kinetics of total CBZ release from tablets containing CBZ-ß-CD and super-disintegrant F-Melt in both SS and LSS followed two steps: a burst release in the first minutes and a slower release in intervals up to 60 min. The release in the second phase has been well described by the Higuchi and Peppas models, which advocate a controlled release by combined diffusion and with some phenomena of swelling and relaxation of the matrix generated by the crospovidone component of the F-Melt excipient.

Formation and Stabilization of Gold Nanoparticles in Bovine Serum Albumin Solution.

The formation and growth of gold nanoparticles (AuNPs) were investigated in pH 7 buffer solution of bovine serum albumin (BSA) at room temperature. The processes were monitored by UV-Vis, circular dichroism, Raman and electron paramagnetic resonance (EPR) spectroscopies. TEM microscopy and dynamic light scattering (DLS) measurements were used to evidence changes in particle size during nanoparticle formation and growth. The formation of AuNPs at pH 7 in the absence of BSA was not observed, which proves that the albumin is involved in the first step of Au(III) reduction. Changes in the EPR spectral features of two spin probes, CAT16 and DIS3, with affinity for BSA and AuNPs, respectively, allowed us to monitor the particle growth and to demonstrate the protective role of BSA for AuNPs. The size of AuNPs formed in BSA solution increases slowly with time, resulting in nanoparticles of different morphologies, as revealed by TEM. Raman spectra of BSA indicate the interaction of albumin with AuNPs through sulfur-containing amino acid residues. This study shows that albumins act as both reducing agents and protective corona of AuNPs.

Self-assembled zinc oxide hierarchical structures with enhanced antibacterial properties from stacked chain-like zinc oxalate compounds.

Single ZnO crystallites assembled into porous hierarchical structures have been prepared by topotactic thermal decomposition of in situ obtained zinc oxalate precursors, whose synthesis involves a redox reaction between 1,2-ethanediol and nitrate ion. For the first time it was demonstrated that post-synthesis protocols of the precursors (e.g. ultrasound irradiation, hydrolytic decomposition) master the hydrogen bonds formed between oxalate chains, allowing that way the adjustment of materials properties (morphology, porosity and optical) and a rational introduction of different dopants (Eu3+/Er3+). The ZnO surface reactivity is confirmed by the significant biocidal activity of the obtained materials against Gram-positive and Gram-negative planktonic and biofilm-embedded cells, superior to those reported in the literature for other ZnO-based materials or antibiotics, associated also with a good biocompatibility.

Tubular and Spherical SiO2 Obtained by Sol Gel Method for Lipase Immobilization and Enzymatic Activity.

A wide range of hybrid biomaterials has been designed in order to sustain bioremediation processes by associating sol-gel SiO2 matrices with various biologically active compounds (enzymes, antibodies). SiO2 is a widespread, chemically stable and non-toxic material; thus, the immobilization of enzymes on silica may lead to improving the efficiency of biocatalysts in terms of endurance and economic costs. Our present work explores the potential of different hybrid morphologies, based on hollow tubes and solid spheres of amorphous SiO2, for enzyme immobilization and the development of competitive biocatalysts. The synthesis protocol and structural characterization of spherical and tubular SiO2 obtained by the sol gel method were fully investigated in connection with the subsequent immobilization of lipase from Rhizopus orizae. The immobilization is conducted at pH 6, lower than the isoelectric point of lipase and higher than the isoelectric point of silica, which is meant to sustain the physical interactions of the enzyme with the SiO2 matrix. The morphological, textural and surface properties of spherical and tubular SiO2 were investigated by SEM, nitrogen sorption, and electrokinetic potential measurements, while the formation and characterization of hybrid organic-inorganic complexes were studied by UV-VIS, FTIR-ATR and fluorescence spectroscopy. The highest degree of enzyme immobilization (as depicted from total organic carbon) was achieved for tubular morphology and the hydrolysis of p-nitrophenyl acetate was used as an enzymatic model reaction conducted in the presence of hybrid lipase⁻SiO2 complex.

A general, eco-friendly synthesis procedure of self-assembled ZnO-based materials with multifunctional properties.

A bioinspired one-pot approach for the synthesis of ZnO-carbohydrate hierarchical architectures was developed. The synergy between a saccharide (mono-, di- or polysaccharide) that contains d-glucose units and triethanolamine is the key parameter of the synthetic methodology. The morphology of the ZnO composites is dictated by the saccharide used, and rod, spindle, solid and hollow spherical-like ZnO structures are obtained by varying the carbohydrate. The synthesized composites present good photocatalytic and antimicrobial activity.