Spontaneous electrification of fluoropolymer-water interfaces probed by electrowetting.

Fluoropolymers are widely used as coatings for their robustness, water-repellence, and chemical inertness. In contact with water, they are known to assume a negative surface charge, which is commonly attributed to adsorbed hydroxyl ions. Here, we demonstrate that a small fraction of these ions permanently sticks to surfaces of Teflon AF and Cytop, two of the most common fluoropolymer materials, upon prolonged exposure to water. Electrowetting measurements carried out after aging in water are used to quantify the density of 'trapped' charge. Values up to -0.07 and -0.2 mC m-2 are found for Teflon AF and for Cytop, respectively, at elevated pH. A similar charge trapping process is also observed upon aging in various non-aqueous polar liquids and in humid air. A careful analysis highlights the complementary nature of electrowetting and streaming potential measurements in quantifying interfacial energy and charge density. We discuss the possible mechanism of charge trapping and highlight the relevance of molecular scale processes for the long term stability and performance of fluoropolymer materials for applications in electrowetting and elsewhere.

High speed adaptive liquid microlens array.

Liquid microlenses are attractive for adaptive optics because they offer the potential for both high speed actuation and parallelization into large arrays. Yet, in conventional designs, resonances of the liquid and the complexity of driving mechanisms and/or the device architecture have hampered a successful integration of both aspects. Here we present an array of up to 100 microlenses with synchronous modulation of the focal length at frequencies beyond 1 kHz using electrowetting. Our novel concept combines pinned contact lines at the edge of each microlens with an electrowetting controlled regulation of the pressure that actuates all microlenses in parallel. This design enables the development of various shapes of microlenses. The design presented here has potential applications in rapid parallel optical switches, artificial compound eye and three dimensional imaging.

Electrowetting driven optical switch and tunable aperture.

We demonstrate an electrowetting based optical switch with tunable aperture. Under the influence of an electric field a non-transparent oil film can be replaced locally by a transparent water drop creating an aperture through which light can pass. Its diameter can be tuned between 0.2 and 1.2 mm by varying the driving voltage or frequency. The on and off response time of the switch is in the order of 2 and 120 ms respectively. Finally we demonstrate an array of switchable apertures that can be tuned independently or simultaneously.

Interaction of oxazole yellow dyes with DNA studied with hybrid optical tweezers and fluorescence microscopy.

We have integrated single molecule fluorescence microscopy imaging into an optical tweezers set-up and studied the force extension behavior of individual DNA molecules in the presence of various YOYO-1 and YO-PRO-1 concentrations. The fluorescence modality was used to record fluorescent images during the stretching and relaxation cycle. Force extension curves recorded in the presence of either dye did not show the overstretching transition that is characteristic for bare DNA. Using the modified wormlike chain model to curve-fit the force extension data revealed a contour length increase of 6% and 30%, respectively, in the presence of YO-PRO-1 and YOYO-1 at 100 nM. The fluorescence images recorded simultaneously showed that the number of bound dye molecules increased as the DNA molecule was stretched and decreased again as the force on the complex was lowered. The binding constants and binding site sizes for YO-PRO-1 and YOYO-1 were determined as a function of the force. The rate of YO-PRO-1 binding and unbinding was found to be 2 orders of magnitude larger than that for YOYO-1. A kinetic model is proposed to explain this observation.