RESUMO
In the ceramic industry, ceramic particles remain on a mold surface due to which the mold requires frequent cleaning during press molding, reducing productivity. Surface texturing and tetrahedral amorphous carbon (ta-C) coatings are well-known surface-energy controllable treatments developed for low adhesion, low friction, and high wear resistance. In the present paper, we demonstrate the effect of reducing ceramic residues using nanotexturing, ta-C coatings, and their combination. We compare two surface morphologies (i.e., 770 nm pitch nanotexturing and flat) and five materials (i.e., nonhardened steel, hardened steel, ta-C, and two types of nitrogen-doped ta-C (ta-CNx). Molding test results show that the ta-C coating on flat surfaces with the highest hardness of 30 GPa shows the lowest residual amount of 5.9 µg for Al2O3 ceramic particles. The amount is 82% less than that of the nonhardened steel. The ta-CNx20, made with a nitrogen flow rate of 20 sccm, shows the lowest residual amount of 234 µg for SiO2 ceramic particles, which is 81% less than that of the nontextured ta-CNx20. In conclusion, we provide design guidelines for nanotextured mold surfaces including the texturing pitch should be small enough for ceramic particles; the mold surface should be sufficiently hard; the lower the surface energy per unit area, the less residues of ceramic particles.
