Revisable and high-strength wheel-spun alginate/graphene oxide based fibrous rods towards a flexible and biodegradable rib internal fixation system.

The intramedullary splint insertion fixation system is the mainstream clinical solution to severe rib fractures. However, the titanium alloy scaffolds have limitations in biocompatibility, flexibility and complexity of surgeries. Here we present a revisable wheel-spun alginate (Alg)/graphene oxide (GO)-based fibrous rod as a potential alternative for a rib internal fixation system. The reversible fusion and fission capability was obtained by optimized Alg/GO blended spinning and GO coating post-treatment. The mechanical performance of the demonstrated rod samples matches the properties of the human rib. A self-designed cubic matrix was used to conduct in situ cell culture. In vitro evaluation not only confirms the cell viability and migration on the fibers' surface, but also investigated the degradation and fission performance of fibrous rods. With a simple, minimally invasive implantation and controlled swelling, Alg/GO fibrous rods are able to tightly fix the rib fracture wound while maintaining sufficient flexibility.

High strength and strain alginate fibers by a novel wheel spinning technique for knitting stretchable and biocompatible wound-care materials.

Alginate fibrous materials have been applied as wound dressing to enhance wound healing due to its nontoxic, biodegradable, and hemostatic nature. Conventional nonwoven fabrication tactics, however, showed weakness in inflammation, degradation stability and mechanical properties. Herein, the wet-spun alginate fibers were prepared by a novel wheel spinning technique, then knitted into wound dressing. Benefiting from optimized wet spinning parameters and the agglomeration of alginate multimers, the fibers were endowed with elevated mechanical performances and biodegradability, which allowed for the feasibility of knitting wound-care materials. Using the new wheel spinning technique, high strength alginate fibers with 173 MPa were produced with breaking strain up to 18% and toughness of 16.16 MJ*m-3. Meanwhile, alginate fibers with high breaking strain reaching 35% were produced with tensile strength of 135 MPa and toughness of 37.47 MJ*m-3. The overall mechanical performances of these alginate fibers with high breaking strain are significantly higher (up to 2 times) than those published in the literature in term of toughness. In vitro degradation evaluation revealed that this wet spun fibrous dressing had good aqueous absorbency (50%) and sustained biodegradation properties. Furthermore, the consequent cell viability study also proved that this alginate knitted fabric is biocompatible for being applied as wound dressing.

Hierarchical porous silk fibroin/poly(L-lactic acid) fibrous membranes towards vascular scaffolds.

Fibrous membranes played an important role to prepare tubular scaffolds for muscular artery regeneration. In this study, a strategy has been developed to combine silk fibroin (SF) with highly porous electrospun poly(L-lactic acid) (PLLA) fibrous membrane towards vascular scaffolds. After PLLA fibres were electrospun and collected, they were immersed into acetone to generate a porous structure with ultra-high surface area. While the pores on PLLA fibres were fulfilled with SF solution and dried, SF was coated uniformly and tightly on PLLA fibres. A multi-layer tubular structure of the tunica media was simulated by winding and stacking a strip of electrospun fibrous membrane. In vitro viability and morphology studies of A7r5 smooth muscle cells were undertaken for up to 14 days. Because the hydrophilicity of SF/PLLA composite fibres were improved dramatically, it had a positive effect on cell adhesion rate (97%) and proliferation (64.4%). Moreover, good cell morphology was observed via a multiphoton laser confocal microscope on SF/PLLA bioactive materials. These results demonstrated that the hierarchical porous SF/PLLA fibrous membranes are promising off-the-shelf scaffolds for muscular artery regeneration.