Pioneering superior efficiency in Methylene blue and Rhodamine b dye degradation under solar light irradiation using CeO2/Co3O4/g-C3N4 ternary photocatalysts.

In this research work, we have successfully synthesized the CeO2/Co3O4/g-C3N4 ternary nanocomposite for hydrothermal method for photocatalytic applications. The synthesized nanocomposites were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy TEM, Photoluminescent spectra (PL), X-ray photoelectron spectroscopy (XPS), Brunauer- Emmett-Teller (BET) and Ultraviolet diffuse reflectance spectroscopy (UV-DRS) technique. As per the optical spectroscopic investigations CeO2/Co3O4/g-C3N4 ternary nanocomposite exhibited the high optical absorption range and its band gap is reduced from 2.95 eV to1.83 eV. The PL spectra showed the lowered emission peak intensity of ternary nanocomposite which is revealed that the better charge separation and slow recombination of electron hole pairs. The highest photocatalytic degradation efficiency of CeO2/Co3O4/g-C3N4 ternary nanocomposite showed 93 % and 86 % towards the pollutant methylene blue and Rhodamine B. Moreover, photodegradation of the pollutants followed pseudo-first order kinetics with a very high-rate constant of 0.02211 min-1 and 0.017756 min-1. Additionally, the ternary nano catalyst was delivered the remarkable stability performance even after five cycles. This research may provide a low-cost approach for synthesized visible light responsive catalysts for use in environmental remediation applications.

Treatment of polluted river water using potential bioflocculant produced by Klebsiella pneumonia UKD24.

Chemically enhanced primary treatment (CEPT) is a rapid wastewater treatment process involving treating wastewater with two chemical-aided processes, coagulation, and flocculation. In the present study, a natural extracellular polymeric substance flocculant (EPSBF) produced by Klebsiella pneumonia UKD24, a bacterium isolated from the sewage treatment plant, and a synthetic polyacrylamide anionic polymer flocculant (PAM) were evaluated to treat polluted river water. The synthetic PAM showed immediate turbidity reduction after agitation, while the EPSBF expressed a rapid decrease in optical density. After 20 min of the settling period, the EPSBF showed reduced rates of turbidity, optical density, and chemical oxygen demand at 74.14 ± 5.2%, 89.37 ± 0.76%, and 87.21 ± 0.73%, respectively, while PAM showed 67.08 ± 4%, 85.68 ± 2%, and 86.57 ± 2%, respectively. EPSBF treatment significantly improved the water quality parameters in terms of total dissolved solids, total suspended solids, conductivity, and oxidation-reduction potential than PAM treatment. However, the EPSBF has shown a more water-holding capacity and relatively weak flock formation, producing more sludge volume than PAM. Furthermore, though the sludge produced by the EPSBF treatment had a higher moisture content, it showed shorter capillary suction time (CST). In contrast, sludge formed in PAM treatment had lower moisture content, but it exhibited prolonged CST value indicating that PAM treatment sludge showed slow dewaterability.

Pan-tumor landscape of fibroblast growth factor receptor 1-4 genomic alterations.

BACKGROUND: Selective tyrosine kinase inhibitors targeting fibroblast growth factor receptor (FGFR) 1-4 genomic alterations are in development or have been approved for FGFR-altered cancers (e.g. bladder cancer and advanced intrahepatic cholangiocarcinoma). Understanding FGFR inhibitor-resistance mechanisms is increasingly relevant; we surveyed the pan-tumor landscape of FGFR1-4 genomic alterations [short variants (SVs), gene rearrangements (REs), and copy number alterations (CNAs)], including their association with tumor mutational burden (TMB) and the genomic comutational landscape. PATIENTS AND METHODS: Comprehensive genomic profiling of 355 813 solid tumor clinical cases was performed using the FoundationOne and FoundationOne CDx assays (Foundation Medicine, Inc.) to identify genomic alterations in >300 cancer-associated genes and TMB (determined on ≤1.1 megabases of sequenced DNA). RESULTS: FGFR1-4 SVs and REs occurred in 9603/355 813 (2.7%), and CNAs in 15 078/355 813 (4.2%) samples. Most common FGFR alterations for bladder cancer, intrahepatic cholangiocarcinoma, and glioma were FGFR3 SVs (1051/7739, 13.6%), FGFR2 REs (618/6641, 9.3%), and FGFR1 SVs (239/11 550, 2.1%), respectively. We found several, potentially clinically relevant, tumor-specific associations between FGFR1-4 genomic alterations and other genomic markers. FGFR3 SV-altered bladder cancers and FGFR1 SV-altered gliomas were significantly less likely to be TMB-high versus unaltered samples. FGFR3 SVs in bladder cancer significantly co-occurred with TERT and CDKN2A/B alterations; TP53 and RB1 alterations were mutually exclusive. In intrahepatic cholangiocarcinoma, FGFR2 REs significantly co-occurred with BAP1 alterations, whereas KRAS, TP53, IDH1, and ARID1A alterations were mutually exclusive. FGFR1 SVs in gliomas significantly co-occurred with H3-3A and PTPN11 alterations, but were mutually exclusive with TERT, EGFR, TP53, and CDKN2A/B alterations. CONCLUSIONS: Overall, our hypothesis-generating findings may help to stratify patients in clinical trials and guide optimal targeted therapy in those with FGFR alterations.

Emerging technologies and potential applications of algae in dentistry - A critical review.

Algae are effective predecessors of nutrient foods and preventive drugs, gaining global attraction in recent years. It exhibits potent antiviral, antibacterial, antifungal, anti-inflammatory, antioxidant, anti-glycemic, and cholesterol-lowering properties due to their richness in highly valuable secondary metabolites. Nevertheless, algae produce valuable bioproducts, its application in dentistry is in its primitive stage. This review focuses on the emergence and emerging role of micro/macroalgae as a natural source of therapeutic, preventive, and biocompatible agents in dentistry. Several studies unveiled that Cyanobacteria, Spirulina, and Chlorella species offer high oral antibacterial and antifungal properties compared to gold standard agents. The characteristic of algae to scavenge superoxide and hydroxyl free radicals, fabricate them as an anti-oxidative and anti-cancer agent. Either alone or by synergism with pinnacle therapies they are found to produce promising curative actions against periodontitis by embattling proinflammatory cytokines. Technologies extend the functions of microalgae as a detoxifying agent, potent drug delivery system, and adjunct regenerative material in chronic periodontitis. Its application as thickening, binding, anticariogenic agent in toothpaste, antibacterial agent in mouthwash, and biocompatible agent in dental impression materials remains very primitive. Low-cost and eco-friendly technologies are needed for the production of oral hygiene products using algal biomass.

Evaluation of setting time, tear strength, dimensional stability and antimicrobial property of silver and titanium nanoparticles incorporated elastomeric impression material.

Graph 1: Graph represents the dimensional stability of Group I and Group II samples.Image 1.

Phyto mediated biogenic synthesis of silver nanoparticles using leaf extract of Andrographis echioides and its bio-efficacy on anticancer and antibacterial activities.

The present study reveals the efficiency of Andrographis echioides for green synthesis of silver nanoparticles (AgNPs). The leaf aqueous extract of A. echioides was used for the synthesis of AgNPs and they were characterized by UV-visible, High Resonance Scanning Electron Microscope (HRSEM), Energy-Dispersive X-ray Spectroscopy (EDX), Atomic Force Microscope (AFM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) analysis. The toxicity of AgNPs was evaluated by using MTT assay. Our present study showed that biosynthesized AgNPs inhibited proliferation of human breast adenocarcinoma cancer cell line (MCF-7) with 31.5 µg/mL at 24h incubation. Results suggest that AgNPs may exert its anticancer activity on MCF-7 cell line by suppressing its growth. The silver nanoparticles was studied against Gram positive and Gram negative bacteria. The highest antibacterial activity was found against Escherichia coli (28 mm) and Staphylococcus aureus (23 mm) respectively.

A sensitive liquid chromatography-mass spectrometry bioanalytical assay for a novel anticancer candidate--ZMC1.

ZMC1 {azetidinecarbothioic acid, [1-(2-pyridinyl) ethylidene] hydrazide} is a lead compound being developed as one of the first mutant p53 targeted anti-cancer drugs. Establishing a precise quantitative method is an integral component of this development. The aim of this study was to develop a sensitive LC/MS/MS assay suitable for assessing purity, stability and preclinical pharmacokinetic studies of ZMC1. Acetonitrile protein precipitation extraction was chosen for plasma sample preparation with satisfactory recovery (84.2-92.8%) for ZMC1. Chromatographic separation was achieved on an Xterra C18 column (50 × 4.6 mm, 3.5 µm) using a gradient elution with mobile phase of 0.1% formic acid in water and acetonitrile. ZMC1 and internal standard 2-amino-6-bromobenzothiazole were identified using selected-ion monitoring mode at m/z 235.2/178.2 and m/z 231.0/150.0 at retention times of 5.2 and 6.3 min, respectively. The method was validated with a linearity range of 3.9-500.0 ng/mL in human plasma and showed acceptable reproducibility with intra- and interday precisions <5.9 and 10.5%, and accuracy within ±5.4% of nominal values. This analytical method together with basic stability data in plasma and plasma binding experiments provides a reliable protocol for the study of ZMC1 pharmacokinetics. This will greatly facilitate the pre-clinical development of this novel anti-cancer drug.

Influence of fermented tannery solid waste on morphological, biochemical, yield and nutritional responses of tomato plants.

The non-tanned proteinaceous tannery solid waste animal fleshing (ANFL), containing high nutritive value, was hydrolyzed using bacteria Selenomonas ruminantium HM000123 through submerged (SmF) and solid-state (SSF) fermentation processes. In addition, the effects of ANFL fermentative hydrolysate on growth, yield and biochemical properties of tomato plants were investigated. The treatments included T1 (SmF-ANFL), T2 (SSF-ANFL), T3 (recommended dose of NPK fertilizers) and a control without any amendment. Hydrolysates of both SmF-ANFL and SSF-ANFL treatments increased the biomass and yield as evidenced by plant height, stem girth, number of leaves and fruit yield when compared with both NPK and control plants. In this 90-day study, significant (p ≤ 0.05) changes were observed in SSF-ANFL treated plants compared to the other treatments. Protein profile analyzed through SDS-PAGE indicates the expression of a high molecular weight protein (205 kDa) and other proteins in the leaves of the SSF-ANFL treated plants. Overall results revealed that SSF-ANFL can be successfully utilized as a fertilizer particularly for cultivating tomato plants.

Antibacterial and cytotoxic effect of biologically synthesized silver nanoparticles using aqueous root extract of Erythrina indica lam.

Simple, yet an effective and rapid approach for the green synthesis of silver nanoparticles (Ag NPs) using root extract of Erythrina indica and its in vitro antibacterial activity was tried against human pathogenic bacteria and its cytotoxic effect in breast and lung cancer cell lines has been demonstrated in this study. Various instrumental techniques were adopted to characterize the synthesized Ag NPs viz. UV-Vis (Ultra violet), FTIR (Fourier Transform Infrared), XRD (X-ray diffraction), DLS (Dynamic light scattering), HR TEM (High-resolution transmission electron microscopy), EDX (Energy-dispersive X-ray spectroscopy). Surface plasmon spectra for Ag NPs are centered nearly at 438 nm with dark brown color. FTIR analysis revealed the presence of terpenes, phenol, flavonols and tannin act as effective reducing and capping agents for converting silver nitrate to Ag NPs. The synthesized Ag NPs were found to be spherical in shape with size in the range of 20-118 nm. Moreover, the synthesized Ag NPs showed potent antibacterial activity against Gram positive and Gram negative bacteria and these biologically synthesized nanoparticles were also proved to exhibit excellent cytotoxic effect on breast and lung cancer cell lines.

Degradation of dibenzofuran via multiple dioxygenation by a newly isolated Agrobacterium sp. PH-08.

AIMS: To demonstrate the biodegradation of dibenzofuran (DF) and its structural analogs by a newly isolated Agrobacterium sp. PH-08. METHODS AND RESULTS: To assess the biodegradation potential of newly isolated Agrobacterium sp. PH-08, various substrates were evaluated as sole carbon sources in growth and biotransformation experiments. ESI LC-MS/MS analysis revealed the presence of angular degrading by-products as well as lateral dioxygenation metabolites in the upper pathway. The metabolites in the lower pathway also were detected. In addition, the cometabolically degraded daughter compounds of DF-related compounds such as BP and dibenzothiophene (DBT) in dual substrate degradation were observed. Strain PH-08 exhibited the evidence of meta-cleavage pathway as confirmed by the activity and gene expression of catechol-2,3-dioxygenase. CONCLUSIONS: Newly isolated bacterial strain, Agrobacterium sp. PH-08, grew well with and degraded DF via both angular and lateral dioxygenation as demonstrated by metabolites identified through ESI LC-MS/MS and GC-MS analyses. The other heterocyclic pollutants were also cometabolically degraded. SIGNIFICANCE AND IMPACT OF THE STUDY: Few reports have described the complete degradation of DF by a cometabolic lateral pathway. Our study demonstrates the novel results that the newly isolated strain utilized the DF as a sole carbon source and mineralized it via multiple dioxygenation.

The effect of implant design on the stress distribution in a three-unit implant-supported distal cantilever fixed partial denture: a three-dimensional finite-element analysis.

CONTEXT: Implant design influences the stress distribution in an implant-supported distal cantilever fixed partial denture and supporting bone tissue. AIM: The purpose of this study was to investigate the effect of implant design on the stress distribution in the framework, implant, and surrounding bone, using a three-dimensional finite-element analysis. MATERIALS AND METHODS: A three-dimensional finite-element model of a mandibular section of bone with implants placed in the first and second premolar region was created to support a distal cantilever fixed partial denture. A one-piece and two-piece implant and its suprastructure were simulated into wire frame models using Pro engineer (Pro E) program. Four models were created in this study. RESULTS: Comparative analysis of all models showed that the maximum stress overall was in the cervical portion of the secondary abutment. When used in combination, the maximum stress was when the two-piece implant was used as secondary abutment. The one-piece implant showed less stress compared to its counterpart when used as secondary abutment. The maximum stress distribution in the bone was around the neck region of the secondary implant. CONCLUSION: Within the limitations of this study, it can be concluded that stress distribution is better in a one-piece implant design when compared with the two-piece implant design, with stress concentration being more at the junction of the abutment and the implant fixture in the two-piece implant. When implants are used as abutments (either primary or secondary), irrespective of their position and design, the secondary implant shows the maximum amount of stresses.

A validated HPLC assay for the determination of R-(-)-gossypol in human plasma and its application in clinical pharmacokinetic studies.

R-(-)-gossypol acetic acid (AT-101), a natural BH3 mimetic, is investigated in a Phase I/II clinical trial for the treatment of advanced solid tumor malignancies. Gossypol undergoes rapid degradation in solution phase, which causes major technical difficulty for its quantitation in plasma. We developed and validated a sensitive HPLC assay for pharmacokinetic evaluation of gossypol. Acetonitrile deproteinization method was chosen for sample preparation and Schiff's base derivative, R-(-)-gossypol-diamino-propanol (GDP), was used as internal standard. Chromatographic separation of gossypol in plasma was performed using a Zorbax Eclipse XDB column C(18) at 30 °C. The mobile phase consists of 10 mmol/L KH(2)PO(4) (pH 3.0) and acetonitrile (20:80) at 1.0 mL/min flow rate. Linearity ranged over 56-3585 ng/mL (R(2)=0.9997±0.0003, n=4), and the limit of detection was 28 ng/mL. The intra- and inter-assay precision was less than 13.7% and the bias ranged from -7.4 to 7.0%. The method was successfully applied to characterize the pharmacokinetics of AT-101 in a Phase I clinical trial. The validated assay is accurate, and sensitive with minimum loss and rapid analysis time and suitable for quantification of gossypol for pharmacokinetics evaluation.

A validated bioanalytical HPLC method for pharmacokinetic evaluation of 2-deoxyglucose in human plasma.

2-Deoxyglucose (2-DG), an analog of glucose, is widely used to interfere with glycolysis in tumor cells and studied as a therapeutic approach in clinical trials. To evaluate the pharmacokinetics of 2-DG, we describe the development and validation of a sensitive HPLC fluorescent method for the quantitation of 2-DG in plasma. Plasma samples were deproteinized with methanol and the supernatant was dried at 45°C. The residues were dissolved in methanolic sodium acetate-boric acid solution. 2-DG and other monosaccharides were derivatized to 2-aminobenzoic acid derivatives in a single step in the presence of sodium cyanoborohydride at 80°C for 45 min. The analytes were separated on a YMC ODS C18 reversed-phase column using gradient elution. The excitation and emission wavelengths were set at 360 and 425 nm. The 2-DG calibration curves were linear over the range of 0.63-300 µg/mL with a limit of detection of 0.5 µg/mL. The assay provided satisfactory intra-day and inter-day precision with RSD less than 9.8%, and the accuracy ranged from 86.8 to 110.0%. The HPLC method is reproducible and suitable for the quantitation of 2-DG in plasma. The method was successfully applied to characterize the pharmacokinetics profile of 2-DG in patients with advanced solid tumors.

Comparative evaluation of dimension and surface detail accuracy of models produced by three different rapid prototype techniques.

Rapid prototyping (RP) is a technology that produces physical models by selectively solidifying ultra violet (UV) sensitive liquid resin using a laser beam. These models can be formed using various techniques. A study was undertaken to compare the dimensional accuracy and surface details of three prototype models with a 3D STL (standard template library) image. In this study the STL file was used to produce three different rapid prototype models namely; model 1-fused deposition model (FDM) using ABS (acrylonitrile butadiene styrene), model 2-Polyjet using a clear resin and model 3-a 3 dimensional printing using a composite material. Measurements were made at various anatomical points. For surface detail reproductions the models were subjected to scanning electron microscopy analysis. The dimensions of the model created by Polyjet were closest to the 3D STL virtual image followed by the 3DP model and FDM. SEM analysis showed uniform smooth surface on Polyjet model with adequate surface details.

Comparison of the roles of serratiopeptidase and dexamethasone in the control of inflammation and trismus following impacted third molar surgery.

INTRODUCTION: Surgical extraction of lower 3 rd molar is the most frequent intervention in oral surgery. This procedure is often associated with significant post operative swelling that may have both biological and social implications. Various studies have been done using different anti inflammatory drugs to study their impact on inflammation. MATERIAL AND METHODS: This study was conducted on 110 patients who had undergone surgical removal of mandibular third molar. The subjects were divided into two groups by double blind method. In addition to post operative swelling and pain , trismus was evaluated using two different groups of drugs. RESULTS: One group was administered 1 mg of dexamethazone every 8 hours for 3 days post operatively. The other group was administered 10 mg of serratiopaptidase every 8 hours for 3 days post operatively. Swelling, pain and trismus were assessed on the 1 st , 3 rd , 5 th and 7 th post operative days. The results of the studies were statistically analysed. CONCLUSION: The results showed dexamethazone was more effective in reduction of swelling and pain in comparison with serratiopaptidase. Both dexamethazone and serratiopaptidase had the same effect on trismus.

Paclitaxel in tyrosine-derived nanospheres as a potential anti-cancer agent: in vivo evaluation of toxicity and efficacy in comparison with paclitaxel in Cremophor.

Paclitaxel (PTX) has gained widespread clinical use yet its administration is associated with significant toxicity. In the present study, the toxicity and anti-tumor efficacy of tyrosine-derived nanospheres (NSP) for the delivery of PTX was compared to a clinical formulation of PTX in PBS-diluted Cremophor® EL (PTX-CrEL-D). Maximum tolerated dose was determined using a concentration series of PTX in NSP and CrEL-D, with toxicity assessed by measuring changes in body weight. Healthy mice administered PTX-NSP continued to gain weight normally while treatment with PTX-CrEL-D resulted in significant weight loss that failed to recover following treatment. Even at the dose of 50mg/kg, PTX-NSP showed better tolerance than 25mg/kg of PTX-CrEL-D. Xenograft studies of breast cancer revealed that the anti-tumor efficacy of PTX-NSP was equal to that of PTX-CrEL-D in tumors originating from both MDA-MB-435 and ZR-75-1 cancer lines. Larger volume of distribution and longer half-life were measured for PTX-NSP administration compared to those reported in the literature for a CrEL formulation. This trend suggests the potential for improved therapeutic index of PTX when administered via NSP. The findings reported here confirm that the NSP formulation is an efficient method for PTX administration with significant increase in maximum tolerated dose, offering possible clinical implications in the treatment of breast tumors.

Diethyl 2-{[3-(2-meth-oxy-benz-yl)thio-phen-2-yl]methyl-idene}malonate.

In the title compound, C(20)H(22)O(5)S, the dihedral angle between the mean planes through the thio-phene and benzene rings is 75.2 (1)°. The meth-oxy group is essentially coplanar with the benzene ring, the largest deviation from the mean plane being 0.019 (2) Šfor the O atom. The malonate group assumes an extended conformation.

Production of laccase from Pleurotus florida using agro-wastes and efficient decolorization of Reactive blue 198.

Pleurotus florida NCIM 1243 produced laccase as the dominant lignolytic enzyme during the dye decolorization. Banana peel was the best substrate for extracellular laccase production under solid state fermentation when compared to mandarin peel and cantaloupe peel. The maximum activity of laccase (5.4 U/g) was detected on the 10 day. The ratio of banana peel: mandarin peel: cantaloupe peel (5:2:3) showed increased production of laccase (6.8 U/g). P. florida produced two extracellular laccase isoenzymes (L1 and L2). The half life of laccase at 60 degrees C was 2 h and at 4 h it retained 25% residual activity. P. florida laccase showed high thermostability and an interesting difference was noticed in the behavior of laccase isoenzymes at different temperature. The L1 isoenzyme of laccase showed remarked thermostability at 60 degrees C in the native PAGE when compared to L2 isoenzyme. The optimum pH, temperature and enzyme concentration for maximum decolorization was found to be 4.5, 60 degrees C and 1.2 U/ml, respectively. Partially purified laccase enzyme showed excellent decolorization activity to Reactive blue 198. The maximum decolorization (96%) was observed at lower dye concentrations (50-100 ppm) which decreased markedly when the dye concentration was increased beyond 150 ppm. The thermostable laccase of P. florida could be effectively used to decolorize the synthetic dyes in the textile effluent and other biotechnological applications.