Calcination-based direct extraction of hydroxyapatite from bovine bone waste.

The main chemical components of waste cow bones are apatite minerals, especially those containing calcium and phosphorus. This study investigated whether this bone could produce extracted hydroxyapatite through calcining at 900° C for different holding times (1-6 h). An average mass loss of 45% occurred in this experiment during the preparation of bone powders, which involved crushing and further calcining at this temperature. The quantitative XRD analysis showed that 99.97 wt.% hydroxyapatite and over 0.3 wt.% calcite were present in the raw and as-calcined bone powders, with trace amounts of CaFe3O5 (calcium ferrite) phases appearing in the calcined product. Depending on the holding calcining times, SEM images of the calcined bovine powders revealed aggregate sizes ranging from 0.5-3 µm and crystallite (grain) sizes ranging from 70 to 340 nm in all calcium-phosphate powder products. Following EDX analysis of all sample surfaces, possible calcium-deficient hydroxyapatite instead of hydroxyapatite formed, as evidenced by the calcined product's Ca/P ratio exceeding 1.67. Additionally, calcining cow bones for 5-6 h at 900° C yielded a high-purity nano-crystalline hydroxyapatite powder precursor in biomedical applications.

In-depth knowledge of the low-temperature hydrothermal synthesis of nanocrystalline hydroxyapatite from waste green mussel shell (Perna Viridis).

ABSTRACTThis study presents the use of a low-temperature hydrothermal method for extracting calcium sources from green mussel shell (P. Viridis) wastes and converting them into synthetic nanosized hydroxyapatite (HA). In this study, raw mussel shells were washed, pulverised, and sieved to start producing a fine calcium carbonate-rich powder. XRD quantitative analysis confirmed that the powder contains 97.6 wt. % aragonite. This powder was then calcined for 5 h at 900 °C to remove water, salt, and mud, yielding a calcium-rich feedstock with major minerals of calcite (68.7 wt.%), portlandite (24.7 wt.%), and minor aragonite (6.5 wt.%). The calcined powders were dissolved in aqueous stock solutions of HNO3 and NH4OH before hydrothermally reacting with phosphoric acid [(NH4)2HPO4], yielding pure, nanoscale (16-18 nm) carbonated HA crystals, according to XRD, FT-IR, and SEM analyses. The use of a low-temperature hydrothermal method for a feedstock powder produced by the calcination of low-cost mussel shell wastes would be a valuable processing approach for the industry's development of large-scale hydroxyapatite nanoparticle production.

Practical insights into the recycling of green mussel shells (Perna Viridis) for the production of precipitated calcium carbonate.

The study presented a powder processing method involving calcination and subsequent carbonation in the synthesis of precipitated calcium carbonate (PCC) for recycling green mussel shells, which contain a high calcium carbonate content. The purity of portlandite [Ca(OH)2] as a result of calcination and subsequent moisture absorption during storage was verified using the XRD-Rietveld method. Further quantitative XRD Rietveld analysis of the PCC product confirmed the presence of vaterite (55.20 wt.%) and calcite (44.80 wt.%) minerals after carbonation process of the calcined powder product. The SEM examination of this product revealed particle aggregates of non-uniform polyhedral and cubical grains of varying small and large sizes. The FTIR analysis also confirmed that calcination and subsequent hydration of mussel shell powder yielded pure portlandite, whereas the carbonation yielded PCC polymorphism. As a result, this powder processing method is simple to scale and reduces the cost of PCC synthesis, which is critical for practical applications. The current study demonstrated that the powder processing method for recycling green mussel shells as starting materials in biomedical applications is technically feasible.

Phosphate recovery through struvite-family crystals precipitated in the presence of citric acid: mineralogical phase and morphology evaluation.

Precipitation strategy of struvite-family crystals is presented in this paper to recover phosphate and potassium from a synthetic wastewater in the presence of citric acid at elevated temperature. The crystal-forming solutions were prepared from crystals of MgCl2 and NH4H2PO4 with a molar ratio of 1:1:1 for Mg+2, [Formula: see text], and [Formula: see text], and the citric acid (C6H8O7) was prepared (1.00 and 20.00 ppm) from citric acid crystals. The Rietveld analysis of X-ray powder diffraction pattern confirmed a mixed product of struvite, struvite-(K), and newberyite crystallized at 30°C in the absence of citric acid. In the presence of citric acid at 30° and 40°C, an abundance of struvite and struvite-(K) were observed. A minute impurity of sylvite and potassium peroxide was unexpectedly found in certain precipitates. The crystal solids have irregular flake-shaped morphology, as shown by scanning electron microscopy micrograph. All parameters (citric acid, temperature, pH, Mg/P, and N/P) were deliberately arranged to control struvite-family crystals precipitation.