Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 25
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Materials (Basel) ; 17(9)2024 Apr 24.
Artigo em Inglês | MEDLINE | ID: mdl-38730780

RESUMO

This paper verified the possibility of applying chitosan and/or ferulic acid or polycaprolactone (PCL)-based coatings to polydimethylsiloxane/neodymium-iron-boron (PDMS/NdFeB) composites using the spin-coating method. The surface modification of magnetic composites by biofunctional layers allows for the preparation of materials for biomedical applications. Biofunctional layered magnetic composites were obtained in three steps. The spin-coating method with various parameters (time and spin speed) was used to apply different substances to the surface of the composites. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to analyze the thickness and surface topography. The contact angle of the obtained surfaces was tested. Increasing spin speed and increasing process time for the same speed resulted in decreasing the composite's thickness. The linear and surface roughness for the prepared coatings were approximately 0.2 µm and 0.01 µm, respectively, which are desirable values in the context of biocompatibility. The contact angle test results showed that both the addition of chitosan and PCL to PDMS have reduced the contact angle θ from 105° for non-coated composite to θ~59-88° depending on the coating. The performed modifications gave promising results mainly due to making the surface hydrophilic, which is a desirable feature of projected biomaterials.

2.
PLoS One ; 19(2): e0298112, 2024.
Artigo em Inglês | MEDLINE | ID: mdl-38346040

RESUMO

BACKGROUND: Microbial biofilms, as a hallmark of cystic fibrosis (CF) lung disease and other chronic infections, remain a desirable target for antimicrobial therapy. These biopolymer-based viscoelastic structures protect pathogenic organisms from immune responses and antibiotics. Consequently, treatments directed at disrupting biofilms represent a promising strategy for combating biofilm-associated infections. In CF patients, the viscoelasticity of biofilms is determined mainly by their polymicrobial nature and species-specific traits, such as Pseudomonas aeruginosa filamentous (Pf) bacteriophages. Therefore, we examined the impact of microbicidal ceragenins (CSAs) supported by mucolytic agents-DNase I and poly-aspartic acid (pASP), on the viability and viscoelasticity of mono- and bispecies biofilms formed by Pf-positive and Pf-negative P. aeruginosa strains co-cultured with Staphylococcus aureus or Candida albicans. METHODS: The in vitro antimicrobial activity of ceragenins against P. aeruginosa in mono- and dual-species cultures was assessed by determining minimum inhibitory concentration (MIC) and minimum bactericidal/fungicidal concentration (MBC/MFC). Inhibition of P. aeruginosa mono- and dual-species biofilms formation by ceragenins alone and in combination with DNase I or poly-aspartic acid (pASP) was estimated by the crystal violet assay. Additionally, the viability of the biofilms was measured by colony-forming unit (CFU) counting. Finally, the biofilms' viscoelastic properties characterized by shear storage (G') and loss moduli (G"), were analyzed with a rotational rheometer. RESULTS: Our results demonstrated that ceragenin CSA-13 inhibits biofilm formation and increases its fluidity regardless of the Pf-profile and species composition; however, the Pf-positive biofilms are characterized by elevated viscosity and elasticity parameters. CONCLUSION: Due to its microbicidal and viscoelasticity-modifying properties, CSA-13 displays therapeutic potential in biofilm-associated infections, especially when combined with mucolytic agents.


Assuntos
Anti-Infecciosos , Fibrose Cística , Infecções por Pseudomonas , Esteroides , Humanos , Pseudomonas aeruginosa , Ácido Aspártico , Expectorantes , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Biofilmes , Desoxirribonuclease I , Testes de Sensibilidade Microbiana
3.
Materials (Basel) ; 15(20)2022 Oct 11.
Artigo em Inglês | MEDLINE | ID: mdl-36295125

RESUMO

Polylactide (PLA) and polycaprolactone (PCL) are biodegradable and bioabsorbable thermoplastic polymers considered as promising materials for oral applications. However, any abiotic surface used, especially in areas naturally colonized by microorganisms, provides a favorable interface for microbial growth and biofilm development. In this study, we investigated the biofilm formation of C. krusei and S. mutans on the surface of PLA and PCL immersed in the artificial saliva. Using microscopic (AFM, CLSM) observations and spectrometric measurements, we assessed the mass and topography of biofilm that developed on PLA and PCL surfaces. Incubated up to 56 days in specially prepared saliva and microorganisms medium, solid polymer samples were examined for surface properties (wettability, roughness, elastic modulus of the surface layer), structure (molecular weight, crystallinity), and mechanical properties (hardness, tensile strength). It has been shown that biofilm, especially S. mutans, promotes polymer degradation. Our findings indicate the need for additional antimicrobial strategies for the effective oral applications of PLA and PCL.

4.
ACS Biomater Sci Eng ; 8(11): 4921-4929, 2022 Nov 14.
Artigo em Inglês | MEDLINE | ID: mdl-36301743

RESUMO

Deoxyribonucleic acid (DNA) evolved as a tool for storing and transmitting genetic information within cells, but outside the cell, DNA can also serve as "construction material" present in microbial biofilms or various body fluids, such as cystic fibrosis, sputum, and pus. In the present work, we investigate the mechanics of biofilms formed from Pseudomonas aeruginosa Xen 5, Staphylococcus aureus Xen 30, and Candida albicans 1408 using oscillatory shear rheometry at different levels of compression and recreate these mechanics in systems of entangled DNA and cells. The results show that the compression-stiffening and shear-softening effects observed in biofilms can be reproduced in DNA networks with the addition of an appropriate number of microbial cells. Additionally, we observe that these effects are cell-type dependent. We also identify other mechanisms that may significantly impact the viscoelastic behavior of biofilms, such as the compression-stiffening effect of DNA cross-linking by bivalent cations (Mg2+, Ca2+, and Cu2+) and the stiffness-increasing interactions of P. aeruginosa Xen 5 biofilm with Pf1 bacteriophage produced by P. aeruginosa. This work extends the knowledge of biofilm mechanobiology and demonstrates the possibility of modifying biopolymers toward obtaining the desired biophysical properties.


Assuntos
Biofilmes , Pseudomonas aeruginosa , Staphylococcus aureus/metabolismo , DNA/metabolismo , DNA/farmacologia
5.
Infect Drug Resist ; 15: 851-871, 2022.
Artigo em Inglês | MEDLINE | ID: mdl-35281576

RESUMO

Background: Extracellular polymeric substances (EPS) produced by bacteria, as they form a biofilm, determine the stability and viscoelastic properties of biofilms and prevent antibiotics from penetrating this multicellular structure. To date, studies demonstrated that an appropriate optimization of the chemistry and morphology of nanotherapeutics might provide a favorable approach to control their interaction with EPS and/or diffusion within the biofilm matrix. Targeting the biofilms' EPS, which in certain conditions can adopt liquid crystal structure, was demonstrated to improve the anti-biofilm activity of antibiotics and nanoparticles. A similar effect is achievable by interfering EPS' production by mucoactive agents, such as N-acetyl-cysteine (NAC). In our previous study, we demonstrated the nanogram efficiency of non-spherical gold nanoparticles, which due to their physicochemical features, particularly morphology, were noted to be superior in antimicrobial activity compared to their spherical-shaped counterparts. Methods: To explore the importance of EPS matrix modulation in achieving a suitable efficiency of peanut-shaped gold nanoparticles (AuP NPs) against biofilms produced by Pseudomonas aeruginosa strains isolated from cystic fibrosis patients, fluorescence microscopy, as well as resazurin staining were employed. Rheological parameters of AuP NPs-treated biofilms were investigated by rotational and creep-recovery tests using a rheometer in a plate-plate arrangement. Results: We demonstrated that tested nanoparticles significantly inhibit the growth of mono- and mixed-species biofilms, particularly when combined with NAC. Notably, gold nanopeanuts were shown to decrease the viscosity and increase the creep compliance of Pseudomonas biofilm, similarly to EPS-targeting NAC. Synergistic activity of AuP NPs with tobramycin was also observed, and the AuP NPs were able to eradicate bacteria within biofilms formed by tobramycin-resistant isolates. Conclusion: We propose that peanut-shaped gold nanoparticles should be considered as a potent therapeutic agent against Pseudomonas biofilms.

6.
Sensors (Basel) ; 21(21)2021 Oct 27.
Artigo em Inglês | MEDLINE | ID: mdl-34770427

RESUMO

Magnetic micro- and nanoparticles (MPs)-based composite materials are widely used in various applications in electronics, biotechnology, and medicine. This group of silicone composites have advantageous magnetic and mechanical properties as well as sufficient flexibility and biocompatibility. These composites can be applied in medicine for biological sensing, drug delivery, tissue engineering, and as remote-controlled microrobots operating in vivo. In this work, the properties of polydimethylsiloxane (PDMS)-based composites with different percentages (30 wt.%, 50 wt.%, 70 wt.%) of NdFeB microparticles as a filler were characterized. The novelty of the work was to determine the influence of the percentage of MP content and physiological conditioning on the properties of the PDMS-MP composites after in vitro incubation. An important essence of the work was a comprehensive study of the properties of materials important from the point of view of medical applications. Materials were tested before and after conditioning in 0.9 wt.% NaCl solution at a temperature of 37 °C. Several studies were carried out, including thermal, physicochemical, and rheological tests. The results show that with an increase of the incubation time, most of the measured thermal and physicochemical parameters decreased. The presence of the magnetic filler, especially at a concentration of 70 wt.%, has a positive effect on thermal stability and physicochemical and rheological properties. The performed tests provided important results, which can lead to further research for a broader application of magnetic composites in the biomedical field.


Assuntos
Nanopartículas , Módulo de Elasticidade , Fenômenos Magnéticos , Teste de Materiais , Temperatura
7.
Sensors (Basel) ; 21(1)2021 Jan 02.
Artigo em Inglês | MEDLINE | ID: mdl-33401731

RESUMO

This paper focuses on the investigation of the diagnostic system for health monitoring and defects, detecting in composite structures using a piezoelectric sensor. A major overview of structural defects in composite materials that have an influence on product performance as well as material strength is presented. Particularly, the proposed diagnostic (health monitoring) system enables to monitor the composite material plate defects during the exploitation in real-time. The investigated health monitoring system can indicate the material structure defects when the periodic test input signal is provided to excite the plate. Especially, the diagnostic system is useful when the defect placement is hard to be identified. In this work, several various numerical and experimental studies were carried out. Particularly, during the first study, the piezoelectric transducer was used to produce mechanical excitation to the composite plate when the impact response is measured with another piezoelectric sensor. The second study focuses on the defect identification algorithms of the raw hologram data consisting of the recorded oscillation modes of the affected composite plate. The main paper results obtained in both studies enable us to determine whether the composite material is characterized by mechanical defects occurring during the response to the periodic excitation. In case of damage, the observed response amplitude was decreased by 70%. Finally, using the time-domain experimental results, the frequency response functions (FRFs) are applied to damage detection assessment and to obtain extra damage information.

8.
Polymers (Basel) ; 12(12)2020 Dec 09.
Artigo em Inglês | MEDLINE | ID: mdl-33316956

RESUMO

In this article, polylactic acid-based composites reinforced with 5% of polyethylene, iron, and magnesium powders were prepared by extrusion and compressed under the pressure of about 10 MPa and characterized. These composites were mechanically, thermally, and morphologically evaluated. It was found, compared to the pure polylactic acid (PLA), an improvement in tensile strength (both σ and YS0.2) was obtained for the composite with the iron powder addition, while the magnesium powder slightly improved the ductility of the composite material (from 2.0 to 2.5%). Degradation studies of these composites in the 0.9% saline solution over a period of 180 days revealed changes in the pH of the solution from acidic to alkaline, in all samples. The most varied mass loss was observed in the case of the PLA-5%Mg sample, where initially the sample mass increased (first 30 days) then decreased, and after 120 days, the mass increased again. In the context of degradation phenomenon of the tested materials, it turns out that the most stable is the PLA composite with the Fe addition (PLA-5%Fe), with highest tensile strength and hardness.

9.
ACS Biomater Sci Eng ; 6(10): 5620-5631, 2020 10 12.
Artigo em Inglês | MEDLINE | ID: mdl-33062848

RESUMO

In recent years, rheological measurements of cells and tissues at physiological and pathological stages have become an essential method to determine how forces and changes in mechanical properties contribute to disease development and progression, but there is no standardization of this procedure so far. In this study, we evaluate the potential of nanoscale atomic force microscopy (AFM) and macroscopic shear rheometry to assess the mechanical properties of healthy and cancerous human colon tissues. The direct comparison of tissue mechanical behavior under uniaxial and shear deformation shows that cancerous tissues not only are stiffer compared to healthy tissue but also respond differently when shear and compressive stresses are applied. These results suggest that rheological parameters can be useful measures of colon cancer mechanopathology. Additionally, we extend the list of biological materials exhibiting compressional stiffening and shear weakening effects to human colon tumors. These mechanical responses might be promising mechanomarkers and become part of the new procedures in colon cancer diagnosis. Enrichment of histopathological grading with rheological assessment of tissue mechanical properties will potentially allow more accurate colon cancer diagnosis and improve prognosis.


Assuntos
Neoplasias do Colo , Neoplasias do Colo/diagnóstico , Humanos , Microscopia de Força Atômica , Pressão , Reologia
10.
Pathogens ; 9(10)2020 Sep 26.
Artigo em Inglês | MEDLINE | ID: mdl-32993180

RESUMO

Voice prosthesis implantation with the creation of a tracheoesophageal fistula is the gold standard procedure for voice rehabilitation in patients after a total laryngectomy. All patients implanted with a voice prosthesis (VP) have biofilms of fungi and bacteria grow on their surface. Biofilm colonization is one of the main reasons for VP degradation that can lead to VP dysfunction, which increases the high risk of pneumonia. In a 20-month evaluation period, 129 cases of prostheses after replacement procedures were investigated. Microbiological examination of the biofilms revealed that there were four of the most common fungi species (Candida spp.) and a large variety of bacterial species present. We studied the relationship between the time of proper function of Provox VP, the microorganism composition of the biofilm present on it, and the degradation level of the silicone material. Evaluation of the surface of the removed VP using an atomic force microscope (AFM) has demonstrated that biofilm growth might drastically change the silicone's mechanical properties. Changes in silicone stiffness and thermal properties might contribute to the failure of VP function. Our data can serve in future studies for the development of methods to prevent or inhibit biofilm formation on the VP surface that would translate to an increase in their durability and safety.

11.
Int J Nanomedicine ; 15: 4573-4589, 2020.
Artigo em Inglês | MEDLINE | ID: mdl-32606693

RESUMO

BACKGROUND: Therapeutic efficiency of ceragenins against cancers may be limited by lack of their hemocompatibility when high concentrations of molecules are required to reach a desired result. Synergistic effects observed upon administration of anticancer agents and metal nanoparticles may provide an opportunity to limit toxicity of immobilized ceragenins on the surface of metal nanoparticles and to improve their therapeutic efficiency at the same time. The aim of present work is to investigate the anticancer activities and hemocompatibility of nanoformulations consisting of ceragenin CSA-131 united with aminosilane-modified iron oxide-based magnetic nanoparticles (MNP) and prepared by 1) covalent bonding (MNP@CSA-131) or 2) by combining CSA-131 with MNP in 1:1 ratio (CSA-131 + MNP). Possible synergistic interactions between CSA-131 and magnetic nanoparticles were also quantified. METHODS: MNP@CSA-131 and CSA-131+MNP were tested in vitro against selected lung and colon cancer cells using colorimetric, fluorimetric and flow cytometry methods. RESULTS: Performed analysis demonstrates that MNP-based nanosystems significantly improve the killing efficiency of tested ceragenin, decreasing the viability of extra 1.37±4.72% to 76.07±15.30% cancer cells when compared to free CSA-131. Quantification of synergistic effects indicates the favorable interactions between CSA-131 and magnetic nanoparticles (CI < 1 for all tested doses), revealing at the same time a reduction in effective doses of ceragenin from 1.17 ± 0.61 to 34.57 ± 12.78 times when combined with MNP. We demonstrate that both MNP@CSA-131 and CSA-131+MNP induce significantly apoptosis of cancer cells and prevent the division of colon cancer cells even at relatively low doses of the active compound (10 µg/mL). Importantly, combining CSA-131 with MNP decreases the hemolytic activity of free ceragenin 4.72 to 7.88 times, which indicates a considerable improvement of hemotoxicity profile. CONCLUSION: Comparative analyses have revealed that both developed CSA-containing nanoformulations due to the utility of synergistic interactions between MNP and CSA-131, which are effective against lung and colon cancer cells. This indicates the new directions in preparation of MNP-based therapeutics, which are relatively easy to synthetize, cost-effective and safe when intravenously administrated.


Assuntos
Compostos Férricos/uso terapêutico , Nanopartículas de Magnetita/uso terapêutico , Esteroides/farmacologia , Antineoplásicos/administração & dosagem , Antineoplásicos/farmacologia , Apoptose/efeitos dos fármacos , Morte Celular/efeitos dos fármacos , Linhagem Celular Tumoral , Permeabilidade da Membrana Celular/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Neoplasias do Colo/patologia , Sinergismo Farmacológico , Humanos , Neoplasias Pulmonares/patologia , Nanopartículas de Magnetita/administração & dosagem , Nanopartículas de Magnetita/ultraestrutura , Teste de Materiais
12.
Int J Mol Sci ; 21(6)2020 Mar 13.
Artigo em Inglês | MEDLINE | ID: mdl-32183193

RESUMO

Saliva plays a crucial role in oral cavity. In addition to its buffering and moisturizing properties, saliva fulfills many biofunctional requirements, including antibacterial activity that is essential to assure proper oral microbiota growth. Due to numerous extra- and intra-systemic factors, there are many disorders of its secretion, leading to oral dryness. Saliva substitutes used in such situations must meet many demands. This study was design to evaluate the effect of core-shell magnetic nanoparticles (MNPs) adding (gold-coated and aminosilane-coated nanoparticles NPs) on antimicrobial (microorganism adhesion, biofilm formation), rheological (viscosity, viscoelasticity) and physicochemical (pH, surface tension, conductivity) properties of three commercially available saliva formulations. Upon the addition of NPs (20 µg/mL), antibacterial activity of artificial saliva was found to increase against tested microorganisms by 20% to 50%. NPs, especially gold-coated ones, decrease the adhesion of Gram-positive and fungal cells by 65% and Gram-negative bacteria cells by 45%. Moreover, the addition of NPs strengthened the antimicrobial properties of tested artificial saliva, without influencing their rheological and physicochemical properties, which stay within the range characterizing the natural saliva collected from healthy subjects.


Assuntos
Anti-Infecciosos/química , Nanopartículas de Magnetita/química , Saliva Artificial/química , Anti-Infecciosos/farmacologia , Aderência Bacteriana/efeitos dos fármacos , Biofilmes/efeitos dos fármacos , Candida/efeitos dos fármacos , Elasticidade , Condutividade Elétrica , Ouro/química , Pseudomonas/efeitos dos fármacos , Saliva Artificial/farmacologia , Silanos/química , Streptococcus/efeitos dos fármacos , Tensão Superficial , Viscosidade
13.
Polymers (Basel) ; 11(11)2019 Nov 14.
Artigo em Inglês | MEDLINE | ID: mdl-31739431

RESUMO

Polycaprolactone (PCL) and polylactide (PLA) are the two most common biodegradable polymers with potential use in oral applications. Both polymers undergo mainly slow hydrolytic degradation in the human body. However, specific conditions of the oral cavity, like elevated temperature, low pH, and presence of saliva affect the rate of hydrolysis. The study examined the properties of solid samples of PCL and PLA subjected to degradation in phosphate buffered saline (PBS) and artificial saliva (AS) at temperatures of 37 or 42 °C, and pH values 2 or 7.4. A number of tests were performed, including measurement of the degree of swelling, weight loss, molecular weight, differential scanning calorimetry, and thermogravimetry of polymers, as well as hardness and tensile strength. Additionally, topography and stiffness of surfaces using atomic force microscopy are presented. It has been noticed that in the artificial saliva, the processes of polymer degradation occur slightly more slowly, and the effects of temperature and pH are less pronounced. We believe that a layer of porcine gastric mucin from artificial saliva that adsorbed on the surface of polymers may have a key role in the observed differences; this layer resembles protective mucin coating tissues in the oral cavity.

14.
J Nanobiotechnology ; 17(1): 81, 2019 Jul 08.
Artigo em Inglês | MEDLINE | ID: mdl-31286976

RESUMO

BACKGROUND: Magnetic nanoparticles (MNPs) are characterized by unique physicochemical and biological properties that allow their employment as highly biocompatible drug carriers. Gelsolin (GSN) is a multifunctional actin-binding protein involved in cytoskeleton remodeling and free circulating actin sequestering. It was reported that a gelsolin derived phosphoinositide binding domain GSN 160-169, (PBP10 peptide) coupled with rhodamine B, exerts strong bactericidal activity. RESULTS: In this study, we synthesized a new antibacterial and antifungal nanosystem composed of MNPs and a PBP10 peptide attached to the surface. The physicochemical properties of these nanosystems were analyzed by spectroscopy, calorimetry, electron microscopy, and X-ray studies. Using luminescence based techniques and a standard killing assay against representative strains of Gram-positive (Staphylococcus aureus MRSA Xen 30) and Gram-negative (Pseudomonas aeruginosa Xen 5) bacteria and against fungal cells (Candida spp.) we demonstrated that magnetic nanoparticles significantly enhance the effect of PBP10 peptides through a membrane-based mode of action, involving attachment and interaction with cell wall components, disruption of microbial membrane and increased uptake of peptide. Our results also indicate that treatment of both planktonic and biofilm forms of pathogens by PBP10-based nanosystems is more effective than therapy with either of these agents alone. CONCLUSIONS: The results show that magnetic nanoparticles enhance the antimicrobial activity of the phosphoinositide-binding domain of gelsolin, modulate its mode of action and strengthen the idea of its employment for developing the new treatment methods of infections.


Assuntos
Antibacterianos/química , Antifúngicos/química , Gelsolina/química , Nanopartículas de Magnetita/química , Fragmentos de Peptídeos/química , Biofilmes , Candida/efeitos dos fármacos , Membrana Celular/metabolismo , Ouro/química , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Testes de Sensibilidade Microbiana , Nanoconchas/química , Plâncton , Pseudomonas aeruginosa/efeitos dos fármacos , Rodaminas/química
15.
Int J Mol Sci ; 20(13)2019 Jun 29.
Artigo em Inglês | MEDLINE | ID: mdl-31261876

RESUMO

The chronic sensation of a dry mouth is a disease condition called xerostomia and affects a large part of the population. Xerostomia is associated with decreased secretion, or more often, qualitative changes in saliva proteins and immunoglobulin concentrations that develop as a result of salivary gland dysfunction. Several reasons causing dry mouth were described, and usually, they include taking medications, diseases or radiotherapy. In some situations, when it is difficult to use salivary stimulants or salivary gland damage is irreversible, the only option might seem to be saliva substitutes. The paper presents the most important aspects considering saliva preparations. The rheological and lubricating properties and the reconstruction of the complex saliva structure has been the main purpose of research. The biological properties of saliva preparations were also widely discussed. As part of the work, the antimicrobial effect of three commercial saliva preparations was tested. Finally, inadequate antimicrobial properties against the strains isolated from the oral cavity were demonstrated. The development of salivary substitutes, in particular, the improvement of antimicrobial properties, can be achieved using nanotechnology, including drug delivery systems containing nanocarriers.


Assuntos
Materiais Biomiméticos/química , Saliva/química , Xerostomia/tratamento farmacológico , Animais , Anti-Infecciosos/química , Anti-Infecciosos/uso terapêutico , Materiais Biomiméticos/uso terapêutico , Humanos , Microfluídica/métodos , Viscosidade , Xerostomia/etiologia
16.
Oral Health Prev Dent ; 16(2): 183-193, 2018.
Artigo em Inglês | MEDLINE | ID: mdl-29736498

RESUMO

PURPOSE: To create and investigate artificial mucin-based saliva substitutes with properties similar to natural saliva. MATERIALS AND METHODS: Natural saliva and six saliva preparations were tested. Saliva substitutes were made using phosphate buffered saline (PBS) prepared in deionised water or plasma-treated water (PBSPT) with addition of porcine gastric mucin and guar gum or poloxamer 407. A wide range of properties were characterised: physicochemical (changes of pH, conductivity and surface tension over time: 1, 24, 96, 168 h after mixing ingredients), rheological (viscosity and viscoelasticity), tribological (coefficient of friction for titanium alloy Ti-6Al-7Nb kinematic couple) and corrosive (open circuit potential, corrosion potential, polarisation resistance). RESULTS: Saliva preparations based only on mucin had pH, viscosity, coefficient of friction and corrosion parameters similar to those of natural saliva. Guar gum increased the values of viscosity, viscoelasticity and the coefficient of friction. Similar results were obtained for poloxamer 407, whereas it decreased the surface tension of tested preparations. Plasma-treated PBS enhanced the corrosion resistance of saliva substitutes with guar gum and poloxamer 407. CONCLUSION: Among the tested compositions, saliva substitutes based only on mucin were found to have parameters similar to human whole saliva. Mucin saliva preparations may have wide applicability for patients with e.g. xerostomia or patients using a metal prosthesis.


Assuntos
Galactanos , Mucinas Gástricas , Mananas , Gomas Vegetais , Poloxâmero , Saliva Artificial/química , Tensoativos , Adulto , Animais , Soluções Tampão , Corrosão , Fricção , Humanos , Concentração de Íons de Hidrogênio , Teste de Materiais , Fosfatos , Cloreto de Sódio , Propriedades de Superfície , Suínos , Viscosidade
17.
Int J Mol Sci ; 19(3)2018 Mar 06.
Artigo em Inglês | MEDLINE | ID: mdl-29509686

RESUMO

Metallic biomaterials in the oral cavity are exposed to many factors such as saliva, bacterial microflora, food, temperature fluctuations, and mechanical forces. Extreme conditions present in the oral cavity affect biomaterial exploitation and significantly reduce its biofunctionality, limiting the time of exploitation stability. We mainly refer to friction, corrosion, and biocorrosion processes. Saliva plays an important role and is responsible for lubrication and biofilm formation as a transporter of nutrients for microorganisms. The presence of metallic elements in the oral cavity may lead to the formation of electro-galvanic cells and, as a result, may induce corrosion. Transitional microorganisms such as sulfate-reducing bacteria may also be present among the metabolic microflora in the oral cavity, which can induce biological corrosion. Microorganisms that form a biofilm locally change the conditions on the surface of biomaterials and contribute to the intensification of the biocorrosion processes. These processes may enhance allergy to metals, inflammation, or cancer development. On the other hand, the presence of saliva and biofilm may significantly reduce friction and wear on enamel as well as on biomaterials. This work summarizes data on the influence of saliva and oral biofilms on the destruction of metallic biomaterials.


Assuntos
Materiais Biocompatíveis/química , Biofilmes , Boca/microbiologia , Fricção em Ortodontia , Materiais Biocompatíveis/normas , Corrosão , Humanos
18.
J Biomed Mater Res B Appl Biomater ; 105(1): 222-229, 2017 01.
Artigo em Inglês | MEDLINE | ID: mdl-26465349

RESUMO

Corrosion processes of metallic biomaterials in the oral cavity pose a significant limitation to the life and reliable functioning of dental materials. In this article, the influence of environment bacteria Desulfotomaculum nigrificans sulfate reducing bacteria on the corrosion processes of 316LV steel was assessed. After 14 and 28 days of contact of the material with the bacterial environment, the surfaces of the tested biomaterial were observed by means of confocal scanning laser microscopy, and their chemical composition was studied using X-Ray Photoelectron Spectrometry and a scanning transmission electron microscopy. Corrosive changes, the presence of sulfur (with atomic concentration of 0.5%) on the surface of the biomaterial and the presence of a thin oxide layer (thickness of ∼20 nm) under the surface of the steel were observed. This corrosion layer with significant size reduction of grains was characterized by an increased amount of oxygen (18% mas., p < 0.001) in comparison to untreated 316LV steel (where oxygen concentration - 10% mas.). Image analysis conducted using APHELION software indicated that corrosion pits took up ∼2.8% of the total tested surface. The greatest number of corrosion pits had a surface area within the range of 100-200 µm2 . © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 222-229, 2017.


Assuntos
Biofilmes/crescimento & desenvolvimento , Desulfotomaculum/fisiologia , Boca/microbiologia , Aço/química , Corrosão , Humanos
19.
Nanomedicine ; 12(8): 2395-2404, 2016 11.
Artigo em Inglês | MEDLINE | ID: mdl-27464757

RESUMO

This study was designed to assess the antifungal/anti-biofilm and hemolytic properties of two polyene antibiotics, amphotericin B (AMF) and nystatin (NYS), attached to the surface of magnetic nanoparticles (MNP) against clinical isolates of Candida species and human red blood cells, respectively. The developed nanosystems, MNP@AMF and MNP@NYS, displayed stronger fungicidal activity than unbound AMF or NYS. Synergistic activity was observed with a combination of polyenes and MNPs against all tested Candida strains. Nanosystems were more potent than unbound agents when tested against Candida strains in the presence of pus, and as agents able to prevent Candida biofilm formation. The observed inactivation of catalase Cat1 in Candida cells upon treatment with the nanosystems suggests that disruption of the oxidation-reduction balance is a mechanism leading to inhibition of Candida growth. The significant decrease of polyenes lytic activity against host cells after their attachment to MNPs surface indicates improvement in their biocompatibility.


Assuntos
Anfotericina B/administração & dosagem , Antibacterianos/administração & dosagem , Nanopartículas de Magnetita , Polienos/administração & dosagem , Antifúngicos , Sistemas de Liberação de Medicamentos , Humanos , Testes de Sensibilidade Microbiana
20.
Acta Bioeng Biomech ; 18(4): 87-96, 2016.
Artigo em Inglês | MEDLINE | ID: mdl-28133370

RESUMO

PURPOSE: Degradation processes of metallic biomaterials in the oral cavity limit the stability and reliability of dental materials. The influence of environment bacteria Desulfotomaculum nigrificans sulfate reducing bacteria on the corrosion processes of Co-Cr-Mo and Ti-6Al-4V alloys was assessed. METHODS: After 28 and 56 days of contact of the materials with the bacterial environment, the surfaces of the biomaterials tested were observed by means of confocal scanning laser microscopy (CSLM), and their chemical composition was studied using X-Ray Photoelectron Spectrometry (XPS). RESULTS: Corrosive changes and the presence of sulfur (with medium atomic concentration of 0.5% for Co-Cr-Mo and 0.3% for Ti-6AL-4V) were observed on the surface of the biomaterials. Image analysis conducted using Aphelion software indicated that corrosion pits took up approx. 2.3% and 1.8% (after 28 days) and 4.2% and 3.1% (after 56 days) of the total test surfaces of cobalt and titanium alloys respectively. The greatest number of corrosion pits had a surface area within the range of 1-50 m2. They constituted from 37% up to 83% of all changes, depending on the type of material. CONCLUSIONS: An evident influence of the SRB on the surfaces of cobalt and titanium alloys was observed. Significant corrosive losses caused by the activity of microorganisms were observed on the metallic surfaces under study. The results of this study have much cognitive and utilitarian significance.


Assuntos
Biofilmes/crescimento & desenvolvimento , Corrosão , Ligas Dentárias/química , Desulfotomaculum/metabolismo , Saliva/microbiologia , Enxofre/química , Humanos , Teste de Materiais
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...