3D printed swelling-driven shape-morphing pH-responsive hydrogel gripper.

Stimuli-responsive soft robots have provided new directions for obtaining advanced biomedical healthcare systems, such as targeted drug delivery capsules, less-invasive biopsy tools, and untethered microsurgical robots. We designed, 3D printed, and tested diverse time-dependent shape changeable 3D pH-responsive soft grippers consisting of N-isopropylacrylamide (NIPAM) and N-isopropylacrylamide-co-acrylic acid (NIPAM-AAc) bilayer. We found that the swelling/deswelling-driven actuation of the pH-responsive NIPAM/NIPAM-AAc gripper is primarily affected by the volume percent (% v/v) of the acrylic acid (AAc) and intensity of UV light. We expect that this study can be applied to untethered pH-responsive soft grippers as smart drug delivery capsules or biopsy tools in biomedical healthcare systems.

Development of a High-SNR Stochastic sEMG Processor in a Multiple Muscle Elbow Joint.

In the robotics and rehabilitation engineering fields, surface electromyography (sEMG) signals have been widely studied to estimate muscle activation and utilized as control inputs for robotic devices because of their advantageous noninvasiveness. However, the stochastic property of sEMG results in a low signal-to-noise ratio (SNR) and impedes sEMG from being used as a stable and continuous control input for robotic devices. As a traditional method, time-average filters (e.g., low-pass filters) can improve the SNR of sEMG, but time-average filters suffer from latency problems, making real-time robot control difficult. In this study, we propose a stochastic myoprocessor using a rescaling method extended from a whitening method used in previous studies to enhance the SNR of sEMG without the latency problem that affects traditional time average filter-based myoprocessors. The developed stochastic myoprocessor uses 16 channel electrodes to use the ensemble average, 8 of which are used to measure and decompose deep muscle activation. To validate the performance of the developed myoprocessor, the elbow joint is selected, and the flexion torque is estimated. The experimental results indicate that the estimation results of the developed myoprocessor show an RMS error of 6.17[%], which is an improvement with respect to previous methods. Thus, the rescaling method with multichannel electrodes proposed in this study is promising and can be applied in robotic rehabilitation engineering to generate rapid and accurate control input for robotic devices.

4D Multiscale Origami Soft Robots: A Review.

Time-dependent shape-transferable soft robots are important for various intelligent applications in flexible electronics and bionics. Four-dimensional (4D) shape changes can offer versatile functional advantages during operations to soft robots that respond to external environmental stimuli, including heat, pH, light, electric, or pneumatic triggers. This review investigates the current advances in multiscale soft robots that can display 4D shape transformations. This review first focuses on material selection to demonstrate 4D origami-driven shape transformations. Second, this review investigates versatile fabrication strategies to form the 4D mechanical structures of soft robots. Third, this review surveys the folding, rolling, bending, and wrinkling mechanisms of soft robots during operation. Fourth, this review highlights the diverse applications of 4D origami-driven soft robots in actuators, sensors, and bionics. Finally, perspectives on future directions and challenges in the development of intelligent soft robots in real operational environments are discussed.

Price Reduction of Anticancer Drugs from 2007 to 2019 in South Korea: The Impact of Pharmaceutical Cost-Containment Policies.

OBJECTIVES: To assess price reductions of anticancer drugs in South Korea over 12 years and analyze the association between price reduction, drug characteristics, and repricing mechanisms. METHODS: We constructed a dataset based on the Health Insurance Review and Assessment Service (HIRA) price log of anticancer drugs from January 2007 to June 2019. We investigated each mechanism that resulted in a price reduction, including actual transaction price (ATP), voluntary reduction by a manufacturer, price-volume agreement, expansion of indication or reimbursement scope, price cut at generic entry, lump price cut in April 2012, and re-evaluation. The price reduction rate per year was estimated by dividing the total number of price reduction events by the total period for which the products were on the market. A Poisson regression model was used to estimate the characteristics-adjusted incidence rate ratio of the price reduction. Price reduction per event was also determined across originator and generic products. Data analysis was performed using R (version 3.5.1). RESULTS: Five hundred price reductions occurred in 439 new anticancer drugs, with a reduction rate per 100 product-years of 23. ATP was the most frequent cause (39.2%) but had minimal impact (average reduction per event of 3%), followed by lump price cut (19.2%) and voluntary reduction (10.2%). Generic entries and lump price cut had the greatest impact (16-29% reduction per event). ATP was the most frequently occurring mechanism, followed by generic entry, voluntary reduction, and the lump price-cut in April 2012. CONCLUSIONS: The incidence of price reduction of anticancer drugs increased gradually due to various repricing mechanisms. Although these mechanisms are effective, improvements can be made. Well-designed mechanisms that actively regulate price adjustment are needed to establish repricing policies that adequately reflect changes in the value of drugs over their entire life cycle.

Pneumatic AFO Powered by a Miniature Custom Compressor for Drop Foot Correction.

For active AFO applications, pneumatic remote transmission has advantages in minimizing the mass and complexity of the system due to the flexibility in placing pneumatic components and providing high back-drivability via simple valve control. However, pneumatic systems are generally tethered to large stationary air compressors, which greatly limit the practical daily usage. In this study, we implemented a wearable custom compressor that can be worn at the trunk of the body and can generate up to 1050 kPa of pressurized air to power an unilateral active AFO for dorsiflexion (DF) assistance of drop-foot patients. In order to minimize the size and weight of the custom compressor, the compression rate of the custom compressor was optimized to the rate of consumption required to power the active AFO. The finalized system can provide a maximum assistive torque of 9.8 Nm at a functional frequency of 1 Hz and the average resistive torque during free movement was 0.03 Nm. The system was tested for five hemiplegic drop-foot patients. The proposed system showed an average improvement of 12.3° of ankle peak dorsiflexion angle during the mid to late swing phase.

A Finger Grip Force Sensor with an Open-Pad Structure for Glove-Type Assistive Devices.

This paper presents a fingertip grip force sensor based on custom capacitive sensors for glove-type assistive devices with an open-pad structure. The design of the sensor allows using human tactile sensations during grasping and manipulating an object. The proposed sensor can be attached on both sides of the fingertip and measure the force caused by the expansion of the fingertip tissue when a grasping force is applied to the fingertip. The number of measurable degrees of freedom (DoFs) are the two DoFs (flexion and adduction) for the thumb and one DoF (flexion) for the index and middle fingers. The proposed sensor allows the combination with a glove-type assistive device to measure the fingertip force. Calibration was performed for each finger joint angle because the variations in the expansion of the fingertip tissue depend on the joint angles. The root mean square error (RMSE) for fingertip force estimation ranged from 3.75% to 9.71% after calibration, regardless of the finger joint angles or finger posture.

Development of a Bendable Outsole Biaxial Ground Reaction Force Measurement System.

Wearable ground reaction force (GRF) measurement systems make it possible to measure the GRF in any environment, unlike a commercial force plate. When performing kinetic analysis with the GRF, measurement of multiaxial GRF is important for evaluating forward and lateral motion during natural gait. In this paper, we propose a bendable GRF measurement system that can measure biaxial (vertical and anterior-posterior) GRF without interrupting the natural gait. Eight custom small biaxial force sensors based on an optical sensing mechanism were installed in the proposed system. The interference between two axes on the custom sensor was minimized by the independent application of a cantilever structure for the two axes, and the hysteresis and repeatability of the custom sensor were investigated. After developing the system by the installation of force sensors, we found that the degree of flexibility of the developed system was comparable to that of regular shoes by investigating the forefoot bending stiffness. Finally, we compared vertical GRF (vGRF) and anterior-posterior GRF (apGRF) measured from the developed system and force plate at the same time when the six subjects walked, ran, and jumped on the force plate to evaluate the performance of the GRF measurement system.

Force estimation in fatigue condition using a muscle-twitch model during isometric finger contraction.

We propose a force estimation method in fatigue condition using a muscle-twitch model and surface electromyography (sEMG). The twitch model, which is an estimate of force by a single spike, was obtained from sEMG features and measured forces. Nine healthy subjects performed isometric index finger abduction until exhaustion for a series of dynamic contractions (0-20% MVC) to characterize the twitch model and static contractions (50% MVC) to induce muscle fatigue. Muscle fatigue was identified based on the changes of twitch model; the twitch peak decreased and the contraction time increased as muscle fatigue developed. Force estimation performance in non-fatigue and fatigue conditions was evaluated and its results were compared with that of a conventional method using the mean absolute value (MAV). In non-fatigue conditions, the performance of the proposed method (0.90 ±â€¯0.05) and the MAV method (0.88 ±â€¯0.06) were comparable. In fatigue conditions, the performance was significantly improved for the proposed method (0.87 ±â€¯0.05) compared with the MAV (0.78 ±â€¯0.09).

Dynamic Elbow Flexion Force Estimation Through a Muscle Twitch Model and sEMG in a Fatigue Condition.

We propose a joint force estimation method to compute elbow flexion force using surface electromyogram (sEMG) considering time-varying effects in a fatigue condition. Muscle fatigue is a major cause inducing sEMG changes with respect to time over long periods and repetitive contractions. The proposed method composed the muscle-twitch model representing the force generated by a single spike and the spikes extracted from sEMG. In this study, isometric contractions at six different joint angles (10 subjects) and dynamic contractions with constant velocity (six subjects) were performed under non-fatigue and fatigue conditions. Performance of the proposed method was evaluated and compared with that of previous methods using mean absolute value (MAV). The proposed method achieved average 6.7 ± 2.8 %RMSE for isometric contraction and 15.6 ± 24.7%RMSE for isokinetic contraction under fatigue condition with more accurate results than the previous methods.

Ranking hand movements for myoelectric pattern recognition considering forearm muscle structure.

Previous pattern recognition algorithms using surface electromyography (sEMG) have been developed for subsets of predefined hand movements without considering muscle structure. In order to decode hand movements, it is important to know which movements are appropriate for PR due to the different independence of movements between individuals and the high correlated characteristics of sEMG patterns between movements. This paper proposes a method to personally rank the order of hand movements from subsets (31 finger flexion, 31 finger extension, and 4 wrist movements in this paper). The movements were sorted into a ranked order with respect to the locations of the electrodes on the proximal forearm and the distal forearm. We evaluated the classification error as the number of desired movements (N m) changed. The maximum N m with an error lower than 10% was 20 for the proximal forearm and 10 for the distal forearm from ranked movements of individuals. Our method could help to identify the optimized order of hand movements considering the personal characteristics of each individual.

A Study on Estimation of Joint Force Through Isometric Index Finger Abduction With the Help of SEMG Peaks for Biomedical Applications.

We propose a new method to estimate joint force using a biomechanical muscle model and peaks of surface electromyography (SEMG). The SEMG measurement was carried out from the first dorsal interosseous muscle during isometric index finger abduction. The SEMG peaks were used as the input of the biomechanical muscle model which is a transfer function to generate the force. The force estimation performance ( R(2) ) was evaluated using the proposed method with nine healthy subjects, and a former method using a mean absolute value (MAV), which is the full-wave rectified and averaged (or low-pass filtered) signal of SEMG in a time window, was compared with the proposed method; the performance of the proposed method (0.94 ± 0.03) was better than that of MAV (0.90 ± 0.02). The proposed method could be widely applied to quantitative analysis of muscle activities based on SEMG.

Muscle fatigue estimation with twitch force derived from sEMG peaks.

We propose a new method - twitch force - for estimation of the muscle behavior during voluntary contraction for assessing localized muscle fatigue. The proposed method uses the sEMG peaks as input and the measured force as output. The twitch force, which is a transfer function to generate force, was estimated during fatiguing contraction. We verified the estimated twitch force based on the measured results with electrical stimulation. The participants performed isometric little finger flexion until exhaustion. SEMG was recorded on the flexor digiti minimi brevis muscle for the proposed method and the electrical stimulation electrodes on the ulnar nerve induced involuntary contraction for reference. As the muscle fatigue level increased, the twitch peaks decreased in both methods. The proposed method can be widely used in the quantitative analysis of muscle fatigue during voluntary contraction.

Joint force estimation using time-varying SEMG feature in fatiguing contraction.

Many studies have estimated joint force using surface electromyography (SEMG), however, the time-variant characteristic of SEMG is not considered. The change of SEMG amplitude is one of manifestations of muscle fatigue. This study proposes a force estimation method using SEMG in fatiguing contraction. The SEMG amplitude is used to determine the signal states by k-means clustering method. According to the signal state changes, the corresponding gain is used to estimate the force. The target contraction is an isometric abduction of an index finger in static and dynamic force conditions for 5 healthy subjects. The estimation performance was evaluated by percentage of root mean squared error (RMSE). The RMSE for the proposed method is 2.5 ± 1.0% under static condition and 8.8 ± 1.2% under dynamic condition. The accuracy using a constant gain calculated at initial time was used to compare with the proposed method. The RMSE are 8.9 ± 2.2% under static condition and 10.1 ± 2.4% under dynamic condition. The proposed method had better performance in both conditions.

An SEMG computer interface using three myoelectric sites for proportional two-dimensional cursor motion control and clicking for individuals with spinal cord injuries.

We developed an alternative computer interface using surface electromyography (sEMG) for individuals with spinal cord injuries (SCI) to access a computer. We designed this interface to make a cursor move on a two-dimensional screen and to click using only three muscles for each subject. In addition, a user can voluntarily control cursor movement speed by modulating muscle contraction levels. Three SCI patients and 10 healthy subjects volunteered to evaluate the performance of this interface using Fitts' law test in a two-dimensional testing setup. The throughputs (TP) of our interface were 0.1962±0.0562 b/s for the SCI patients and 0.4356±0.0706 b/s for the healthy subjects. This interface could help SCI patients handle a wider range of activities such as browsing the Internet and communicating with others.

Effects of 17ß-estradiol on the release of monocyte chemotactic protein-1 and MAPK activity in monocytes stimulated with peritoneal fluid from endometriosis patients.

AIM: Hormones and inflammation have been implicated in the pathological process of endometriosis; therefore, we investigated the combined effects of 17ß-estradiol (E2) and peritoneal fluid obtained from patients with endometriosis (ePF) or a control peritoneal fluid (cPF) obtained from patients without endometriosis on the release of monocyte chemotactic protein-1 (MCP-1) by monocytes and the role of signaling pathways. METHODS: Monocytes were cultured with ePF and cPF in the presence of E2; the MCP-1 levels in the supernatants were then measured by ELISA. In addition, mitogen activated protein kinase (MAPK) activation was measured by Western blotting of phosphorylated proteins. RESULTS: E2 down-regulated MCP-1 release by lipopolysaccharide- or cPF-treated monocytes, but failed to suppress its release by ePF-treated monocytes. The release of MCP-1 by ePF- and cPF-treated monocytes was efficiently abrogated by p38 mitogen activated protein kinase (MAPK) inhibitors; however, the MCP-1 release by cPF-treated monocytes, but not by ePF-treated monocytes, was blocked by a MAPK kinase inhibitor. In addition, ePF and cPF induced the phosphorylation of extracellular stress regulated kinase (ERK)1/2, p38 MAPK and c-Jun N-terminal kinase (JNK). E2 decreased the phosphorylation of p38 MAPK, but not ERK1/2 in ePF-treated monocytes; however, E2 decreased the phosphorylation of p38 MAPK, ERK1/2 and JNK in cPF-treated monocytes. CONCLUSIONS: The ability of E2 to modulate MCP-1 production is impaired in ePF-treated monocytes, which may be related to regulation of MAPK activity. These findings suggest that the failure of E2 to suppress ePF-treated production of MCP-1 may be involved in the pathogenesis of endometriosis.