Antioxidant and Antimicrobial Properties and GC-MS Chemical Compositions of Makwaen Pepper (Zanthoxylum myriacanthum) Extracted Using Supercritical Carbon Dioxide.

This research aimed to optimize pressure (10-20 MPa) and temperature (45-60 °C) conditions for supercritical fluid extraction (SFE) of Makwaen pepper (Zanthoxylum myriacanthum) extract (ME) in comparison to conventional hydro-distillation extraction. Various quality parameters, including yield, total phenolic compounds, antioxidants, and antimicrobial activities of the extracts, were assessed and optimized using a central composite design. The optimal SFE conditions were found to be 20 MPa at 60 °C, which resulted in the highest yield (19%) and a total phenolic compound content of 31.54 mg GAE/mL extract. IC50 values for DPPH and ABTS assays were determined to be 26.06 and 19.90 µg/mL extract, respectively. Overall, the ME obtained through SFE exhibited significantly better physicochemical and antioxidant properties compared to ME obtained through hydro-distillation extraction. Gas chromatography-mass spectrometry (GC-MS) analysis revealed that beta-pinene was the major component in the ME obtained through SFE (23.10%), followed by d-limonene, alpha-pinene, and terpinen-4-ol at concentrations of 16.08, 7.47, and 6.34%, respectively. On the other hand, the hydro-distillation-extracted ME showed stronger antimicrobial properties than the SFE-extracted ME. These findings suggest that both SFE and hydro-distillation have the potential for extracting Makwaen pepper, depending on the intended purpose of use.

Thermoplastic mung bean starch/natural rubber/sericin blends for improved oil resistance.

Oil resistant thermoplastic elastomers (TPE) were prepared using mung bean thermoplastic starch (MTPS) blending with rubbers and sericin. Sericin was incorporated into MTPS as a compatibilizer. MTPS with sericin (MTPSS) was blended with natural rubber (NR) and epoxidized NR (ENR). Sericin at 5% improved the tensile strength (10 MPa), elastic recovery (52%) and morphology of the MTPSS/ENR blend. The mechanical properties, elastic recovery and morphology of the MTPSS5/NR blend were improved by the addition of ENR. The MTPSS/ENR showed palm (28%) and motor oils (8%) swelling resistance because of the hydrophilicity of MTPS and high polarity of ENR. The MTPSS/ENR/NR showed gasoline swelling resistance (104%) because of the hydrophilicity of MTPS and low polarity of NR. FTIR confirmed a reaction between the -NH groups of sericin and the epoxy groups of ENR. This reaction improved the compatibility, mechanical properties, elastic recovery, morphology and oils swelling resistance of the blends.

Effect of sodium benzoate and chlorhexidine gluconate on a bio-thermoplastic elastomer made from thermoplastic starch-chitosan blended with epoxidized natural rubber.

Thermoplastic elastomer (TPE) was developed by blending thermoplastic starch (TPS) with rubber. Thermoplastic starch-chitosan (TPSC) was prepared by the solution mixing of cassava starch, chitosan (CTS) and glycerol in acidified water (lactic acid 1 wt%) at 80 °C follow by melt mixing at 130 °C. Sodium benzoate (BEN) and chlorhexidine gluconate (Cl) were added during the solution mixing as additives for antimicrobial properties. TPSC was melt-mixed with epoxidized natural rubber (ENR) (70/30 wt/wt). The tensile strength and elongation at break of the TPSC/ENR increased with the additive content. Elastic recovery was improved by the addition of Cl. A new peak in the FTIR data confirmed the reaction between the reactive functional groups of the CTS and the additives with the epoxy groups of ENR. These reactions and miscibility of the TPSC/ENR/additives blends improved the mechanical properties, elasticity, morphology, and antimicrobial properties of the blends.