Rapid Dissolution of Gold in Alcohols by In-Situ Generation of Halogens.

The dissolution of elemental gold is a fundamental step in its recycling by hydrometallurgy but has a significant environmental impact due to the use of strong acids or highly toxic reagents. Herein, it is shown that mixtures of acetyl halides and hydrogen peroxide in alcohols promote the rapid room-temperature dissolution of gold by halogenation to form Au(III) metalates. After leaching, distillation of the alcohol and re-dissolution in dilute HCl, the gold was refined through its precipitation by a simple diamide ligand; this method was also applied to separate gold from a mixture of metals. The leaching process is rapid, avoids the use of highly toxic materials and corrosive acids, and can be integrated into selective separation processes, so has the potential to be used in the purification of gold from ores, spent catalysts, and electronic and nano-waste.

Efficient Recycling of Gold and Copper from Electronic Waste by Selective Precipitation.

The recycling of metals from electronic waste (e-waste) using efficient, selective, and sustainable processes is integral to circular economy and net-zero aspirations. Herein, we report a new method for the selective precipitation of metals such as gold and copper that offsets the use of organic solvents that are traditionally employed in solvent extraction processes. We show that gold can be selectively precipitated from a mixture of metals in hydrochloric acid solution using triphenylphosphine oxide (TPPO), as the complex [(TPPO)4 (H5 O2 )][AuCl4 ]. By tuning the acid concentration, controlled precipitation of gold, zinc and iron can be achieved. We also show that copper can be selectively precipitated using 2,3-pyrazinedicarboxylic acid (2,3-PDCA), as the complex [Cu(2,3-PDCA-H)2 ]n ⋅ 2n(H2 O). The combination of these two precipitation methods resulted in the recovery of 99.5 % of the Au and 98.5 % of the Cu present in the connector pins of an end-of-life computer processing unit. The selectivity of these precipitation processes, combined with their straightforward operation and the ability to recycle and reuse the precipitants, suggests potential industrial uses in the purification of gold and copper from e-waste.

Rapid Dissolution of Noble Metals in Organic Solvents.

The dissolution of elemental noble metals (NMs) such as gold, platinum, palladium, and copper is necessary for their recycling but carries a high environmental burden due to the use of strong acids and toxic reagents. Herein, a new approach was developed for the rapid dissolution of elemental NMs in organic solvents using mixtures of triphenylphosphine dichloride or oxalyl chloride and hydrogen peroxide, forming metal chloride salts directly. Almost quantitative dissolution of metallic Au, Pd, and Cu was observed within minutes at room temperature. For Pt, dissolution was achieved, albeit more slowly, using the chlorinating oxidant alone but was inhibited on addition of hydrogen peroxide. After leaching, transfer of PtIV and PdII chloride salts from the organic phase into a 6 m HCl aqueous phase facilitated their separation by precipitation of PtIV using a simple diamide ligand. In contrast, the retention of AuIII chloridometalate in the organic phase allowed its selective separation from Ni and Cu from a leachate solution obtained from electronic CPUs. This new approach has potential application in the hydrometallurgical leaching and purification of NMs from ores, spent catalysts, and electronic and nano-wastes.

Assembling Atomically Precise Noble Metal Nanoclusters Using Supramolecular Interactions.

Supramolecular chemistry (SC) of noble metal nanoclusters (NMNCs) is one of the fascinating areas of contemporary materials science. It is principally concerned with the noncovalent interactions between NMNCs, as well as between NMNCs and molecules or nanoparticles. This review focuses on recent advances in the supramolecular assembly of NMNCs and applications of the resulting structures. We have divided the topics into four distinct subgroups: (i) SC of NMNCs in gaseous and solution phases, (ii) supramolecular interactions of NMNCs in crystal lattices, (iii) supramolecular assemblies of NMNCs with nanoparticles and NMNCs, and (iv) SC of NMNCs with other molecules. The last explores their interactions with fullerenes, cyclodextrins, cucurbiturils, crown ethers, and more. After discussing these topics concisely, various emerging properties of the assembled systems in terms of their mechanical, optical, magnetic, charge-transfer, etc. properties and applications are presented. SC is seen to provide a crucial role to induce new physical and chemical properties in such hybrid nanomaterials. Finally, we highlight the scope for expansion and future research in the area. This review would be useful to those working on functional nanostructures in general and NMNCs in particular.

Ligand structure and charge state-dependent separation of monolayer protected Au25 clusters using non-aqueous reversed-phase HPLC.

The synthesis of atomically precise noble metal clusters using various protocols often results in a mixture of clusters with different cores. Hence, it is important to isolate such clusters in their pure form in terms of composition especially for crystallization. High-performance liquid chromatography (HPLC) is a powerful tool to achieve this. The interaction of ligands with column functionalities determine the extent of separation and their stability under conditions used. We demonstrate a systematic flow rate dependent study of three different aliphatic ligand protected Au25 clusters, with three commercially available alkyl and aryl functionalized reversed-phase HPLC columns, as they represent the variations encountered commonly. Molecular docking simulations were carried out to understand the interactions between the stationary phase and the cluster surface. These investigations enabled the selection of an appropriate column for better separation of structurally different ligand protected clusters. High-resolution separation of anionic and neutral Au25 clusters was acheived with a selectivity (α) of 1.2 by tuning the chromatographic conditions. This study would provide new insights in developing better methods for the efficient separation of monolayer protected clusters.

A covalently linked dimer of [Ag25(DMBT)18].

We report the first example of a covalently bound dimer of monolayer protected atomically precise silver nanocluster [Ag25(DMBT)18]- (DMBT stands for 2,4-dimethylbenzenethiol). Covalently linked dimers could be important to design new cluster assembled materials with composite properties.

Rapid isotopic exchange in nanoparticles.

Rapid solution-state exchange dynamics in nanoscale pieces of matter is revealed, taking isotopically pure atomically precise clusters as examples. As two isotopically pure silver clusters made of 107Ag and 109Ag are mixed, an isotopically mixed cluster of the same entity results, similar to the formation of HDO, from H2O and D2O. This spontaneous process is driven by the entropy of mixing and involves events at multiple time scales.

Camouflaging Structural Diversity: Co-crystallization of Two Different Nanoparticles Having Different Cores But the Same Shell.

Two ligand-protected nanoscale silver moieties, [Ag46 (SPhMe2 )24 (PPh3 )8 ](NO3 )2 and [Ag40 (SPhMe2 )24 (PPh3 )8 ](NO3 )2 (abbreviated as Ag46 and Ag40 , respectively) with almost the same shell but different cores were synthesized simultaneously. As their external structures are identical, the clusters were not distinguishable and become co-crystallized. The occupancy of each cluster was 50 %. The outer shell of both is composed of Ag32 S24 P8 , which is reminiscent of fullerenes, and it encapsulates a well-studied core, Ag14 and a completely new core, Ag8 , which correspond to a face-centered cube and a simple cube, respectively, resulting in the Ag46 and Ag40 clusters. The presence of two entities (Ag40 and Ag46 clusters) in a single crystal and their molecular formulae were confirmed by detailed electrospray ionization mass spectrometry. The optical spectrum of the mixture showed unique features which were in good agreement with the results from time-dependent density functional theory (TD-DFT).

Approaching Materials with Atomic Precision Using Supramolecular Cluster Assemblies.

Supramolecular chemistry is a major area of chemistry that utilizes weaker non-covalent interactions between molecules, including hydrogen bonding, van der Waals, electrostatic, π···π, and C-H···π interactions. Such forces have been the basis of several molecular self-assemblies and host-guest complexes in organic, inorganic, and biological systems. Atomically precise nanoclusters (NCs) are materials of growing interest that display interesting structure-property correlations. The evolving science of such systems reaffirms their molecular behavior. This gives a possibility of exploring their supramolecular chemistry, leading to assemblies with similar or dissimilar cluster molecules. Such assemblies with compositional, structural, and conformational precision may ultimately result in cluster-assembled hybrid materials. In this Account, we present recent advancements on different possibilities of supramolecular interactions in atomically precise cluster systems that can occur at different length scales. We first present a brief discussion of the aspicule model of clusters, considering Au25(SR)18 as an example, that can explain various aspects of its atomic precision and distinguish the similar or dissimilar interacting sites in their structures. The supramolecular interaction of 4- tert-butylbenzyl mercaptan (BBSH)-protected [Au25(SBB)18]- NCs with cyclodextrins (CD) to form Au25SBB18∩CD n ( n = 1-4) and that of [Ag29(BDT)12]3- with fullerenes to form [Ag29(BDT)12(C60) n]3- ( n = 1-9) (BDT = 1,3-benzenedithiolate) are discussed subsequently. The formation of these adducts was studied by electrospray ionization mass spectrometry (ESI MS), optical absorption and NMR spectroscopy. In the subsequent sections, we discuss how variation in intercluster interactions can lead to polymorphic crystals, which are observable in single-crystal X-ray diffraction. Taking [Ag29(BDT)12(TPP)4]3- (TPP = triphenylphosphine) clusters as an example, we discuss how the different patterns of C-H···π and π···π interactions between the secondary ligands can alter the packing of the NCs into cubic and trigonal lattices. Finally, we discuss how the supramolecular interactions of atomically precise clusters can result in their hybrid assemblies with plasmonic nanostructures. The interaction of p-mercaptobenzoic acid ( p-MBA)-protected Ag44( p-MBA)30 NCs with tellurium nanowires (Te NWs) can form crossed-bilayer precision assemblies with a woven-fabric-like structure with an angle of 81° between the layers. Similar crossed-bilayer assemblies show an angle of 77° when Au102( p-MBA)44 clusters are used to form the structure. Such assemblies were studied by transmission electron microscopy (TEM). Precision in these hybrid assemblies of Te NWs was highly controlled by the geometry of the ligands on the NC surface. Moreover, we also present how Ag44( p-MBA)30 clusters can encapsulate gold nanorods to form cage-like nanostructures. Such studies involved TEM, scanning transmission electron microscopy (STEM), and three-dimensional tomographic reconstructions of the nanostructures. The hydrogen bonding interactions of the -COOH groups of the p-MBA ligands were the major driving force in both of these cases. An important aspect that is central to the advancement of the area is the close interplay of molecular tools such as MS with structural tools such as TEM along with detailed computational modeling. We finally conclude this Account with a future perspective on the supramolecular chemistry of clusters. Advancements in this field will help in developing new materials with potential optical, electrical, and mechanical properties.

Isomerism in Supramolecular Adducts of Atomically Precise Nanoparticles.

We present isomerism in a few supramolecular adducts of atomically precise nanoparticles, [Ag29(BDT)12∩(CD) n]3- ( n = 1-6), abbreviated as I where BDT and CD are 1,3-benzenedithiol and cyclodextrins (α, ß and γ), respectively; ∩ symbolizes an inclusion complex. The different host-guest complexes of I were characterized in the solution state as well as in the gas phase. The CDs (α, ß and γ) encapsulate a pair of BDT ligands protecting the Ag29 core. This unique geometry of the supramolecular adducts makes the system similar to octahedral complexes of transition metals, which manifest various isomers. These isomers of I ( n = 2-4) were separated by ion mobility mass spectrometry (IM MS). We proposed structures of all the inclusion complexes with the help of IM MS measurements and molecular docking, density functional theory (DFT), and collision cross section (CCS) calculations.

Monolayer-Protected Noble-Metal Clusters as Potential Standards for Negative-Ion Mass Spectrometry.

A detailed mass-spectrometric study of atomically precise monolayer-protected clusters revealed the potential application of such materials as mass-spectrometric standards, mostly in negative-ion mode and in the high-mass range. To date, very few molecules are known that can be efficiently ionized and detected at lower concentrations as negative ions with high signal intensities beyond m/ z 3000. Noble-metal clusters are molecules with definite masses, sizes, and shapes, which makes them excellent candidates to choose as standards over conventional low-molecular-weight polymers or clusters of ionic salts. They may be used as calibrants in all possible modes, including tandem mass spectrometry and ion mobility. With the advancement in materials science, more and more molecules are being added to the list that are inherently negatively charged in solution and can be examined by mass spectrometry. In this report, we demonstrate the use of three such model cluster systems for their potential to calibrate mass spectrometers in negative-ion mode. This idea can be extended to many other clusters known so far to achieve calibration in extended mass ranges.

Bent Keto Form of Curcumin, Preferential Stabilization of Enol by Piperine, and Isomers of Curcumin∩Cyclodextrin Complexes: Insights from Ion Mobility Mass Spectrometry.

A detailed examination of collision cross sections (CCSs) coupled with computational methods has revealed new insights into some of the key questions centered around curcumin, one of the most intensively studied natural therapeutic agents. In this study, we have distinguished the structures and conformers of the well-known enol and the far more elusive keto form of curcumin by using ion mobility mass spectrometry (IM MS). The values of the theoretically predicted isomers were compared with the experimental CCS values to confirm their structures. We have identified a bent structure for the keto form and the degree of bending was estimated. Using IM MS, we have also shown that ESI MS reflects the solution phase structures and their relative populations, in this case. Piperine, a naturally occurring heterocyclic compound, is known to increase the bioavailability of curcumin. However, it is still not clearly understood which tautomeric form of curcumin is better stabilized by it. We have identified preferential stabilization of the enol form in the presence of piperine using IM MS. Cyclodextrins (CDs) are used as well-known carriers in the pharmaceutical industry for increasing the stability, solubility, bioavailability, and tolerability of curcumin. However, the crystal structures of supramolecular complexes of curcumin∩CD are unknown. We have determined the structures of different isomers of curcumin∩CD (α- and ß-CD) complexes by comparing the CCSs of theoretically predicted structures with the experimentally obtained CCSs, which will further help in understanding the specific role of the structures involved in different biological activities.

Polymorphism of Ag29(BDT)12(TPP)43- cluster: interactions of secondary ligands and their effect on solid state luminescence.

We present the first example of polymorphism (cubic & trigonal) in single crystals of an atomically precise monolayer protected cluster, Ag29(BDT)12(TPP)43-. We demonstrate that C-Hπ interactions of the secondary ligands (TPP) are dominant in a cubic lattice compared to a trigonal lattice, resulting in a greater rigidity of the structure, which in turn, results in a higher luminescence efficiency in it.

Understanding proton capture and cation-induced dimerization of [Ag29(BDT)12]3- clusters by ion mobility mass spectrometry.

Proton transfer reactions have been a topic of fundamental interest in several areas of chemistry and biology. However, such reactivity has not been explored in detail for nanoscale materials. In this article, we present a unique reaction of an atomically precise monolayer-protected silver nanocluster, [Ag29(BDT)12]3-, with a proton (H+). Under controlled conditions, the strong proton affinity facilitated a complete conversion of the cluster to its protonated form, [Ag29(BDT)12H]2-. Moreover, binding of alkali metal ions (Li+, Na+, K+, Rb+ and Cs+) induced specific structural changes and also favored dimerization of the cluster. In this case, the cations acted as a bridge between the two clusters and the degree of dimerization was specific to the size of the cations. The conformational changes and separation of the alkali-metal ion bound dimers from their respective monomers have been investigated by ion mobility mass spectrometry (IM MS) and tandem mass spectrometric studies. Density functional theory (DFT) calculations have been used to determine the possible structures of the monomers and the dimers. Similar reactivity of the cluster can also be extended to other metal ions. While the present study helps to expand the ion-chemistry of atomically precise clusters, gas-phase basicity of the molecule can be explored in further detail and this can find applications in the areas of sensing and materials in general.

Fullerene-Functionalized Monolayer-Protected Silver Clusters: [Ag29(BDT)12(C60) n]3- ( n = 1-9).

We report the formation of supramolecular adducts between monolayer-protected noble metal nanoclusters and fullerenes, specifically focusing on a well-known silver cluster, [Ag29(BDT)12]3-, where BDT is 1,3-benzenedithiol. We demonstrate that C60 molecules link with the cluster at specific locations and protect the fragile cluster core, enhancing the stability of the cluster. A combination of studies including UV-vis, high-resolution electrospray ionization mass spectrometry, collision-induced dissociation, and nuclear magnetic resonance spectroscopy revealed structural details of the fullerene-functionalized clusters, [Ag29(BDT)12(C60) n]3- ( n = 1-9). Density functional theory (DFT) calculations and molecular docking simulations affirm compatibility between the cluster and C60, resulting in its attachment at specific positions on the surface of the cluster, stabilized mainly by π-π and van der Waals interactions. The structures have also been confirmed from ion mobility mass spectrometry by comparing the experimental collision cross sections (CCSs) with the theoretical CCSs of the DFT-optimized structures. The gradual evolution of the structures with an increase in the number of fullerene attachments to the cluster has been investigated. Whereas the structure for n = 4 is tetrahedral, that of n = 8 is a distorted cube with a cluster at the center and fullerenes at the vertices. Another fullerene, C70, also exhibited similar behavior. Modified clusters are expected to show interesting properties.

Sequential Dihydrogen Desorption from Hydride-Protected Atomically Precise Silver Clusters and the Formation of Naked Clusters in the Gas Phase.

We report the formation of naked cluster ions of silver of specific nuclearities, uncontaminated by other cluster ions, derived from monolayer-protected clusters. The hydride and phosphine co-protected cluster, [Ag18(TPP)10H16]2+ (TPP, triphenylphosphine), upon activation produces the naked cluster ion, Ag17+, exclusively. The number of metal atoms present in the naked cluster is almost the same as that in the parent material. Two more naked cluster ions, Ag21+ and Ag19+, were also formed starting from two other protected clusters, [Ag25(DPPE)8H22]3+ and [Ag22(DPPE)8H19]3+, respectively (DPPE, 1,2-bis(diphenylphosphino)ethane). By systematic fragmentation, naked clusters of varying nuclei are produced from Ag17+ to Ag1+ selectively, with systematic absence of Ag10+, Ag6+, and Ag4+. A seemingly odd number of cluster ions are preferred due to the stability of the closed electronic shells. Sequential desorption of dihydrogen occurs from the cluster ion, Ag17H14+, during the formation of Agn+. A comparison of the pathways in the formation of similar naked cluster ions starting from two differently ligated clusters has been presented. This approach developed bridges the usually distinct fields of gas-phase metal cluster chemistry and solution-phase metal cluster chemistry. We hope that our findings will enrich nanoscience and nanotechnology beyond the field of clusters.

[Ag59(2,5-DCBT)32]3-: a new cluster and a precursor for three well-known clusters.

We report the synthesis of a new silver cluster, [Ag59(2,5-DCBT)32]3- (I) (2,5-DCBT: 2,5-dichlorobenzenethiol), which acts as a precursor for the synthesis of three well-known silver clusters, [Ag44(2,4-DCBT/4-FTP)30]4- (II) (4-FTP: 4-fluorothiophenol and 2,4-DCBT: 2,4-dichlorobenzenethiol), [Ag25(2,4-DMBT)18]- (III) (2,4-DMBT: 2,4-dimethylbenzenethiol) and [Ag29(1,3-BDT)12(PPh3)4]3- (IV) (1,3-BDT: 1,3-benzenedithiol and PPh3: triphenylphosphine). This newly synthesized silver cluster, I, is characterized using UV-vis absorption studies, high resolution electrospray ionization mass spectrometry (ESI MS) and other analytical tools. The optical absorption spectrum shows distinct features which are completely different from the previously reported silver clusters. We perform the rapid transformations of I to other well-known clusters II, III and IV by reaction with different thiols. The time-dependent UV-vis and ESI MS measurements reveal that I dissociates into distinct thiolate entities in the presence of thiols and the thiolates recombine to produce different clusters. The conversion mechanism is found to be quite different from the previous reports where it occurs through the initial formation of ligand exchanged products. Here, we also show the synthesis of a different cluster core, [Ag44(2,4-DCBT)30]4- (IIa) using 2,4-DCBT, a structural isomer of 2,5-DCBT under the same synthetic conditions used for I. This observation demonstrates the effect of isomeric thiols on controlling the size of silver clusters. The conversion of one cluster to several other clusters under ambient conditions and the effect of ligand structure in silver cluster synthesis give new insights into the cluster chemistry.

Genomic expression of mesenchymal stem cells to altered nanoscale topographies.

The understanding of cellular response to the shape of their environment would be of benefit in the development of artificial extracellular environments for potential use in the production of biomimetic surfaces. Specifically, the understanding of how cues from the extracellular environment can be used to understand stem cell differentiation would be of special interest in regenerative medicine. In this paper, the genetic profile of mesenchymal stem cells cultured on two osteogenic nanoscale topographies (pitted surface versus raised islands) are compared with cells treated with dexamethasone, a corticosteroid routinely used to stimulate bone formation in culture from mesenchymal stem cells, using 19k gene microarrays as well as 101 gene arrays specific for osteoblast and endothelial biology. The current studies show that by altering the shape of the matrix a cell response (genomic profile) similar to that achieved with chemical stimulation can be elicited. Here, we show that bone formation can be achieved with efficiency similar to that of dexamethasone with the added benefit that endothelial cell development is not inhibited. We further show that the mechanism of action of the topographies and dexamethasone differs. This could have an implication for tissue engineering in which a simultaneous, targeted, development of a tissue, such as bone, without the suppression of angiogenesis to supply nutrients to the new tissue is required. The results further demonstrate that perhaps the shape of the extracellular matrix is critical to tissue development.