Utilizing Activated Carbon Nanopores for Electrochemical Oxidation of Perylene to Redox-Active 3,10-Perylenedione: Application in Electrochemical Capacitor Electrodes.

We demonstrate that nanopores of activated carbon (AC) function as nanoreactors that oxidize perylene (PER) to a redox-active organic compound, 3,10-perylenedione (PERD), without any metal catalysts or organic solvents. PER is first adsorbed on AC in the gas phase, and the PER-adsorbed AC is subjected to electrochemical oxidation in aqueous H2SO4 as the electrolyte. Because gas-phase adsorption is solvent-free, PER is completely adsorbed on AC as long as the amount of PER does not exceed the saturated adsorption capacity of the AC, which enables accurate control of the amount adsorbed. PER is electrochemically oxidized to PERD in the nanopores of AC at above 0.7 V vs Ag/AgCl. The hybridized PERD undergoes a rapid reversible two-electron redox reaction in the nanopores owing to the large contact interface between the conductive carbon pore surfaces and PERD. The resulting AC/PERD hybrids serve as electrodes for electrochemical capacitors, utilizing the rapid redox reaction of PERD. The hybridization method is advantageous for quantitatively optimizing electrochemical capacitor performance by adjusting the amount of adsorbed PER. Moreover, because PERD hybridization in the AC nanopores does not expand the electrode volume, the volumetric capacitance increases with increasing hybridized PERD content. In three-electrode cell measurements, the volumetric capacitance at 0.05 A g-1 reaches 299 F cm-3, and 61% of this capacitance is retained at 10 A g-1 when 5 mmol of PER is used per gram of AC. Meanwhile, pristine AC delivers 117 F cm-3 at 0.05 A g-1 with a capacitance retention of 46% at 10 A g-1. Two-electrode cell measurements reveal that self-discharge is significantly suppressed by the hybridized PERD when AC/PERD hybrids and AC are used as cathodes and anodes, respectively, compared to that of a symmetrical AC cell. Moreover, PERD does not undergo cross-diffusion in the asymmetrical cells during self-discharge tests for 24 h.

Metal-Free Homocoupling of Pyrene inside the Pores of Mesoporous Carbons via Electrochemical Oxidation: Application for Electrochemical Capacitors.

A pyrene dimer (PYD) is synthesized by electrochemical oxidation via homocoupling of pyrene (PY) inside the pores of MgO-templated mesoporous carbons without any metal catalysts or organic solvents. The resulting MgO-C/PYD hybrids can be used as high-performance aqueous electrochemical capacitor electrodes due to the reversible redox property of PYD and large contact area between the hybridized PYD and conductive carbon surfaces, which enable rapid charge transfer at the large contact interface. In our previous study, PY was considered to polymerize through electrochemical oxidation, and activated carbon with the pore sizes of ∼4 nm was used as a porous carbon substrate. In this study, the MgO-templated carbons have the average pore sizes of 5, 10, and 30 nm, and their large mesopore volumes can accommodate a large amount of PYD for enhancing the capacitance. To develop high-performance electrochemical capacitors, the dependence of the capacitance enhancement and the capacitance retention on the amount of PY and the pore sizes of MgO-templated carbons are studied. It is found that mesopores are necessary for fast charging/discharging, but the capacitance retention and capacitance enhancement decrease with increasing the mesopore sizes and the amount of PY due to the decreased utilization ratio of PY.

Synthesis of Polynorbornadiene within the Pores of Activated Carbons: Effects on EDLC and Hydrogen Adsorption Performances.

Norbornadiene (NBD) is adsorbed on activated carbon (AC), and the adsorbed NBD is polymerized within the pores of AC. Two kinds of ACs─AC-2 with only micropores of ∼2 nm and AC-4 with not only micropores but also mesopores below 4 nm─are examined to study the effects of the hybridized polynorbornadiene (PNBD) on the electric double-layer capacitor and hydrogen adsorption performance. Various measurements are performed to determine the form of the hybridized PNBD inside the pores of AC. Scanning and transmittance electron microscopy observations of the AC/PNBD hybrids confirm that PNBD is hybridized inside the pores of AC, and there is little PNBD on the surface of AC particles. The nitrogen adsorption/desorption measurement for the hybrids of AC-4 reveals that PNBD is not hybridized preferentially inside micropores rather than mesopores irrespective of the amount of PNBD. In addition, both micropore and mesopore volumes decrease at a constant rate with increasing amounts of PNBD. These results suggest that PNBD is hybridized not as a layer but as an agglomerate for both ACs, and the agglomerate delocalizes over the whole AC pores, which is supported by the results of electrochemical measurements and hydrogen adsorption behavior of the hybrids.