The Role of Carbon Nanotube Pretreatments in the Adsorption of Benzoic Acid.

Four different types of multi-walled carbon nanotubes (MWCNTs) were used and compared for the treatment of benzoic acid contaminated water. The types of nanotubes used were: (1) non-purified (CNTsUP), as made; (2) purified (CNTsP), not containing the catalyst; (3) oxidized (CNTsOX), characterized by the presence of groups such as, -COOH; (4) calcined (CNTs900), with elimination of interactions between nanotubes. In addition, activated carbon was also used to allow for later comparison. The adsorption tests were conducted on an aqueous solution of benzoic acid at concentration of 20 mg/L, as a model of carboxylated aromatic compounds. After the adsorption tests, the residual benzoic acid concentrations were measured by UV-visible spectrometry, while the carbon nanotubes were characterized by TG and DTA thermal analyses and electron microscopy (SEM). The results show that the type of nanotubes thermally treated at 900 °C has the best performances in terms of adsorption rate and amounts of collected acid, even if compared with the performance of activated carbons.

Preparation of ETS-10 Microporous Phase Pellets with Color Change Properties.

The main scope of the present work is to synthesize pH-responsive Engelhard titanium silicate (ETS)-10 phase crystalline pellets through the smart modification of a synthetic process which was previously applied to the preparation of other phases. The original preparative method, which envisages the use of the same initial synthesis as a binder for the preparation of pellets, was modified by adding an appropriate pH indicator to a number of systems subject to this investigation. It should be noted that the modified process was never before used to give access to pH-responsive ETS-10 phase pellets, and it is disclosed here for the first time. The study started from the definition of the best experimental conditions, which were optimized by analyzing the effects of temperature and system composition. The addition of the pH indicator did not alter the physicochemical characteristics and reactivity of the system. The pH-responsive ETS-10 phase crystalline pellets were characterized by an adequate mechanical strength and by a high capability to change color. The latter aspect can be particularly useful when this material is used in catalytic processes whose performance is strictly dependent on the pH value. The amount of gel used, as well as the working temperature, were the main critical parameters to be controlled during the preparation of pH-responsive ETS-10 phase crystalline pellets. The pellets were fully characterized by X-ray diffraction in order to investigate and identify the possible phases, and by using a hardness tester to measure the compressive strength. Finally, toning tests were performed.

PEG-templated mesoporous silica nanoparticles exclusively target cancer cells.

Mesoporous silica nanoparticles (MSNs) have been proposed as DNA and drug delivery carriers, as well as efficient tools for fluorescent cell tracking. The major limitation is that MSNs enter cells regardless of a target-specific functionalization. Here we show that non functionalized MSNs, synthesized using a PEG surfactant-based interfacial synthesis procedure, do not enter cells, while a highly specific, receptor mediated, cellular internalization of folic acid (FOL) grafted MSNs (MSN-FOL), occurs exclusively in folate receptor (FR) expressing cells. Neither the classical clathrin pathway nor macropinocytosis is involved in the MSN endocytic process, while fluorescent MSNs (MSN-FITC) enter cells through aspecific, caveolae-mediated, endocytosis. Moreover, internalized particles seem to be mostly exocytosed from cells within 96 h. Finally, cisplatin (Cp) loaded MSN-FOL were tested on cancerous FR-positive (HeLa) or normal FR-negative (HEK293) cells. A strong growth arrest was observed only in HeLa cells treated with MSN-FOL-Cp. The results presented here show that our mesoporous nanoparticles do not enter cells unless opportunely functionalized, suggesting that they could represent a promising vehicle for drug targeting applications.

Characterisation of nanohybrids of porphyrins with metallic and semiconducting carbon nanotubes by EPR and optical spectroscopy.

Single-walled carbon nanotubes (SWCNTs) are noncovalently functionalised with octaethylporphyrins (OEPs) and the resulting nanohybrids are isolated from the free OEPs. Electron paramagnetic resonance (EPR) spectroscopy of cobalt(II)OEP, adsorbed on the nanotube walls by pi-pi-stacking, demonstrates that the CNTs act as electron acceptors. EPR is shown to be very effective in resolving the different interactions for metallic and semiconducting tubes. Moreover, molecular oxygen is shown to bind selectively to nanohybrids with semiconducting tubes. Water solubilisation of the porphyrin/CNT nanohybrids using bile salts, after applying a thorough washing procedure, yields solutions in which at least 99% of the porphyrins are interacting with the CNTs. Due to this purification, we observe, for the first time, the isolated absorption spectrum of the interacting porphyrins, which is strongly red-shifted compared to the free porphyrin absorption. In addition a quasi-complete quenching of the porphyrin fluorescence is also observed.

Structural defects play a major role in the acute lung toxicity of multiwall carbon nanotubes: physicochemical aspects.

Carbon nanotubes (CNT) have been reported to elicit toxic responses in vitro and in vivo, ascribed so far to metal contamination, CNT length, degree of oxidation, or extent of hydrophilicity. To examine how structural properties may modulate the toxicity of CNT, one preparation of multiwall CNT has been modified (i) by grinding (introducing structural defects) and subsequently heating either in a vacuum at 600 degrees C (causing reduction of oxygenated carbon functionalities and reduction of metallic oxides) or in an inert atmosphere at 2400 degrees C (causing elimination of metals and annealing of defects) and (ii) by heating at 2400 degrees C in an inert atmosphere and subsequently grinding the thermally treated CNT (introducing defects in a metal-deprived carbon framework). The presence of framework and surface defects, metals, and oxygenated functionalities was monitored by means of a set of techniques, including micro-Raman spectroscopy, adsorption calorimetry, X-ray photoelectron spectroscopy, inductively coupled plasma mass spectrometry, and atomic emission spectroscopy. Contrary to traditional toxicants, such as asbestos, CNT may quench rather than generate oxygenated free radicals. The potential of the modified CNT to scavenge hydroxyl radicals was thus evaluated by means of electron spin resonance spectroscopy (spin trapping). The original ground material exhibited a scavenging activity toward hydroxyl radicals, which was eliminated by heating at 2400 degrees C but restored upon grinding. This scavenging activity, related to the presence of defects, appears to go paired with the genotoxic and inflammatory potential of CNT reported in the companion paper. Thus, defects may be one of the major factors governing the toxic potential of CNT.

Structural defects play a major role in the acute lung toxicity of multiwall carbon nanotubes: toxicological aspects.

Experimental studies indicate that carbon nanotubes (CNTs) have the potential to induce adverse pulmonary effects, including alveolitis, fibrosis, and genotoxicity in epithelial cells. Here, we explored the physicochemical determinants of these toxic responses with progressively and selectively modified CNTs: ground multiwall CNTs modified by heating at 600 degrees C (loss of oxygenated carbon functionalities and reduction of oxidized metals) or at 2400 degrees C (annealing of structural defects and elimination of metals) and by grinding the material that had been heated at 2400 degrees C before (introduction of structural defects in a metal-deprived framework). The CNTs were administered intratracheally (2 mg/rat) to Wistar rats to evaluate the short-term response (3 days) in bronchoalveolar lavage fluid (LDH, proteins, cellular infiltration, IL-1beta, and TNF-alpha). The long-term (60 days) lung response was assessed biochemically by measuring the lung hydroxyproline content and histologically. In vitro experiments were also performed on rat lung epithelial cells to assess the genotoxic potential of the modified CNTs with the cytokinesis block micronucleus assay. The results show that the acute pulmonary toxicity and the genotoxicity of CNT were reduced upon heating but restored upon grinding, indicating that the intrinsic toxicity of CNT is mainly mediated by the presence of defective sites in their carbon framework.

Distribution of aluminum and boron in the periodical building units of boron-containing Beta zeolites.

Various boron only ([B]-BEA) as well as aluminum- and boron-containing beta zeolites ([Al,B]-BEA) have been prepared and modified by ion exchange of ammonium, sodium, and nickel ions. The zeolite samples have been characterized by 11B, 27Al, and 29Si MAS as well as three of them by 11B and 27Al 3Q-MAS NMR spectroscopy. The quantitative contributions of defect-free Si(nX) (n = 2, 1, 0; X = Al, B) and Si(OH)x (x = 2, 1) sites to the NMR signal intensities were calculated from the various Si/(Al + B) ratios and relative 11B, 27Al, and 29Si NMR signal intensities using the special distribution of aluminum and boron in different periodical building units of the zeolite framework. The boron atoms are sitting exclusively in diagonal positions in the four-membered rings of [B]-BEA zeolites, while the aluminum atoms are situated both in diagonal and lone positions in the four-membered rings of [Al,B]-BEA zeolites. A higher part of boron atoms are positioned in framework-related deformed tetrahedral boron species than in lattice positions in the [B]-BEA than in the [Al,B]-BEA zeolites. All extraframework octahedral aluminum species are transformed back to lattice positions due to ion exchange from the protonated form to ammonium-, sodium-, or nickel-ions containing zeolites. Oppositely, trigonal boron leaves the zeolite structure completely during ion exchange.

Reactivity of carbon nanotubes: free radical generation or scavenging activity?

Carbon nanotubes (CNTs) currently attract intense research efforts because of their unique properties which make them suitable for many industrial applications. When inhaled, CNTs constitute a possible hazard to human health. Several studies have shown that when instilled in the lung of experimental animals, CNTs induced an inflammatory and fibrotic response similar to that caused by other toxic particles which might be the result of oxidative stress caused by particle- and/or cell-derived free radicals. There is, however, no direct experimental evidence of a capacity of carbon nanotubes to generate directly free radicals. Here we report that multiwall carbon nanotubes (MWCNT) in aqueous suspension do not generate oxygen or carbon-centered free radicals in the presence of H2O2 or formate, respectively, as detected with the spin-trapping technique. Conversely, we observed that, when in contact with an external source of hydroxyl or superoxide radicals, MWCNT exhibit a remarkable radical scavenging capacity. It is therefore possible that the inflammatory reaction reported in vivo must be ascribed to MWCNT features other than particle-derived free radical generation.

Catalytically grown carbon nanotubes of small diameter have a high Young's modulus.

Experimental studies of carbon nanotubes (CNTs) obtained through different synthesis routes show considerable variability in their mechanical properties. The strongest CNTs obtained so far had a high Young's modulus of 1 TPa but could only be produced in gram scale quantities. The synthesis by catalytic chemical vapor deposition, a method that holds the greatest potential for large-scale production, gives CNTs with a high defect density. This leads to low Young's modulus values below 100 GPa for multiwall CNTs. Here we performed direct measurements of the mechanical properties of catalytically grown CNTs with only a few walls and find a Young's modulus of 1 TPa. This high value is confirmed for CNTs grown under two different growth conditions where the synthesis parameters such as the hydrocarbon source, catalyst material, and the synthesis temperature were varied. The results indicate that the observed difference in the Young's modulus for the catalytically grown CNTs with high and low numbers of walls is probably related to the growth mechanism of CNT.

Respiratory toxicity of multi-wall carbon nanotubes.

Carbon nanotubes focus the attention of many scientists because of their huge potential of industrial applications, but there is a paucity of information on the toxicological properties of this material. The aim of this experimental study was to characterize the biological reactivity of purified multi-wall carbon nanotubes in the rat lung and in vitro. Multi-wall carbon nanotubes (CNT) or ground CNT were administered intratracheally (0.5, 2 or 5 mg) to Sprague-Dawley rats and we estimated lung persistence, inflammation and fibrosis biochemically and histologically. CNT and ground CNT were still present in the lung after 60 days (80% and 40% of the lowest dose) and both induced inflammatory and fibrotic reactions. At 2 months, pulmonary lesions induced by CNT were characterized by the formation of collagen-rich granulomas protruding in the bronchial lumen, in association with alveolitis in the surrounding tissues. These lesions were caused by the accumulation of large CNT agglomerates in the airways. Ground CNT were better dispersed in the lung parenchyma and also induced inflammatory and fibrotic responses. Both CNT and ground CNT stimulated the production of TNF-alpha in the lung of treated animals. In vitro, ground CNT induced the overproduction of TNF-alpha by macrophages. These results suggest that carbon nanotubes are potentially toxic to humans and that strict industrial hygiene measures should to be taken to limit exposure during their manipulation.

Distribution of aluminum in different periodical building units of MOR and BEA zeolites.

Various commercial, homemade, and dealuminated mordenites (MOR) and beta (BEA) zeolites as well as cobalt modified BEAs have been characterized by 29Si- and 27Al solid-state magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. The quantitative contributions of Si(nAl) and Si(OH)x sites to the NMR signal intensities were calculated from the various Si/Al ratios and relative 29Si and 27Al NMR signal intensities assuming a special distribution of aluminum in different periodical building units of the zeolite framework. A different dealumination and silanol formation mechanism for MOR and BEA was suggested. We conclude that we are able to distinguish the Si(OH)x groups that are original defect sites or produced in a dealumination or calcination process.

A generic organometallic approach toward ultra-strong carbon nanotube polymer composites.

Multiwalled carbon nanotubes have been functionalized using n-butyllithium and then covalently bonded to a chlorinated polypropylene. The following addition of the polymer-grafted nanotubes to the chlorinated polypropylene polymer matrix resulted in significant increase of mechanical properties. As nanotube content is increased to 0.6 vol %, Young's Modulus increased by a factor of 3, while both the tensile strength and the toughness increased by factors of 3.8 and 4, respectively. This covalent functionalization enables us to get an efficient dispersion and excellent interfacial stress transfer, potentially leading to new ultra-strong polymer composite materials.

Characterization of an interaction between functionalized carbon nanotubes and an enzyme.

Carbon nanotubes (CNTs) did not exhibit strong interactions with Biliverdin IX beta reductase enzyme (BVRB) in water. With the use of noncovalent functionalization by the surfactant Triton X-100, the surfaces of the CNTs were changed from hydrophobic to hydrophilic. The hydrophilic surface of the CNT-Triton conjugate interacts with the hydrophilic surface of BVRB, thus creating a water-soluble complex. Results from ultracentrifugation through a sucrose gradient and gel electrophoresis show the presence of the enzyme. Raman spectroscopy confirmed that the enzyme indeed interacts with CNT-Triton conjugates.

Interconnecting carbon nanotubes with an inorganic metal complex.

Intermolecular carbon nanotube junctions were formed through amide linkage of amino functionalized multiwall carbon nanotubes and [Ru (dcbpy)(bpy)2](PF6)2, an inorganic metal complex. Nanotube interconnects were visualized using atomic force microscopy. Absorption and emission spectroscopy showed significant changes between starting products and the resulting ruthenium nanotube complex, indicative of successful chemical modification.