An Innovative Design to Enhance Osteoinductive Efficacy and Biomechanical Behavior of a Titanium Dental Implant.

The present study investigated the in vivo bone-forming efficacy of an innovative titanium (Ti) dental implant combined with a collagen sponge containing recombinant human bone morphogenetic protein-2 (BMP-2) in a pig model. Two different concentrations of BMP-2 (20 and 40 µg/mL) were incorporated into collagen sponges and placed at the bottom of Ti dental implants. The investigated implants were inserted into the edentulous ridge at the canine-premolar regions of Lanyu small-ear pigs, which were then euthanized at weeks 1, 2, 4, 8, and 12 post-implantation. Specimens containing the implants and surrounding bone tissue were collected for histological evaluation of their bone-to-implant contact (BIC) ratios and calculation of maximum torques using removal torque measurement. Analytical results showed that the control and BMP-2-loaded implants presented good implant stability and bone healing for all testing durations. After 1 week of healing, the BMP-2-loaded implants with a concentration of 20 µg/mL exhibited the highest BIC ratios, ranging from 58% to 76%, among all groups (p = 0.034). Additionally, they also possessed the highest removal torque values (50.1 ± 1.3 N-cm) throughout the 8-week healing period. The BMP-2-loaded implants not only displayed excellent in vivo biocompatibility but also presented superior osteoinductive performance. Therefore, these findings demonstrate that BMP-2 delivered through a collagen sponge can potentially enhance the early-stage osseointegration of Ti dental implants.

Enhancement of in vitro antibacterial activity and bioactivity of iodine-loaded titanium by micro-scale regulation using mixed-acid treatment.

Postoperative infection and subsequent device loss are serious complications in the use of titanium dental implants and plates for jawbone reconstruction. We have previously reported that NaOH-CaCl2 -thermal-ICl3 -treated titanium (NaCaThIo) has a nano-scale surface and exhibits antibacterial activity against Staphylococcus aureus. The present study examined the surface properties of mixed-acid treated and then iodine-treated titanium (MA-NaCaThIo), and evaluated oral antibacterial activity and cytotoxicity compared with the results obtained with NaCaThIo. MA-NaCaThIo formed a surface layer with a nano-scale network structure having microscale irregularities, and both the thickness of the surface layer (1.49 ± 0.16 µm) and the average surface roughness (0.35 ± 0.03 µm) were significantly higher than those of NaCaThIo. Furthermore, MA-NaCaThIo maintained high hydrophilicity with a contact angle of 7.5 ± 1.7° even after 4 weeks, as well as improved apatite formation, iodine ion release, and antibacterial activity against Prevotella intermedia compared to NaCaThIo. Cell culture test revealed that MA-NaCaThIo exhibited no cytotoxicity against MG-63 and Vero cells, while increased cell proliferation, ALP activity and mineralization of MG-63 compared to NaCaThIo. This treated titanium is expected to be useful for the development of next-generation titanium devices having both bone-bonding and antibacterial properties.

Sarcopenia and decline in appendicular skeletal muscle mass are associated with hypoperfusion in key hubs of central autonomic network on 3DSRT in older adults with progression of normal cognition to Alzheimer's disease.

AIM: Although sarcopenia is common in patients with Alzheimer's disease (AD), the neural substrates involved remain unclear. We investigated the relationship between sarcopenia, as well as its definition components, and regional cerebral blood flow (rCBF) in older adults with progression of normal cognition to AD. METHODS: 99m Tc-ethyl-cysteinate-dimer single-photon emission computed tomography was carried out in 95 older adults with progression of normal cognition to AD (40 men and 55 women, mean ± SD age 80.9 ± 6.8 years). The associations of rCBF determined by 3-D stereotactic region of interest template software, with sarcopenia and its definition components, slower gait speed, weaker grip strength, and decline in appendicular skeletal muscle mass index (ASMI) were analyzed. RESULTS: Logistic regression analysis adjusted by age, sex, mini-mental state examination score and education showed that sarcopenia as well as ASMI less than the cut-off (men 7.0 kg/m2 , women 5.7 kg/m2 ) were associated with significantly reduced rCBF in the key hub of the central autonomic network, including the insula, anterior cingulate cortex, subcallosal area, rectal gyrus, hypothalamus, amygdala and caudate head. Sarcopenia and ASMI decline were associated with hypoperfusion in the aforementioned cortical hubs of the central autonomic network in men, but with hypoperfusion of the hypothalamus in women. Linear regression analysis showed significant correlations of ASMI/cut-off with rCBF in the bilateral medial frontal cortex, as well as rCBF in the aforementioned key hubs. CONCLUSIONS: Hypoperfusion in key hubs of central autonomic network is implicated in the emergence of sarcopenia, probably through ASMI decline in vulnerable older adults. Geriatr Gerontol Int 2023; 23: 16-24.

External Validation of the Kumamoto Criteria in Transthyretin Amyloid Cardiomyopathy Screening　- A Retrospective Cohort Study.

Background: The Kumamoto criteria have been proposed as a non-invasive screen for transthyretin amyloid cardiomyopathy. This study assessed the validity of the Kumamoto criteria externally. Methods and Results: The study included 138 patients (median age 73 years; 65% male) who underwent 99 mTc-pyrophosphate (PYP) scintigraphy. Patients were divided into 4 groups according to total scores on the Kumamoto criteria (i.e., 0-3) for the following 3 factors: high-sensitivity cardiac troponin T ≥0.0308 ng/mL, wide (≥120 ms) QRS, and left ventricular posterior wall thickness ≥13.6 mm. The diagnostic performance and positive predictive value (PPV) of the Kumamoto criteria for positive 99 mTc-PYP scintigraphy were validated. Eighteen (13%) patients were positive on 99 mTc-PYP scintigraphy. The Kumamoto criteria had a favorable diagnostic performance (area under the curve 0.808). The PPV for groups with scores of 0, 1, 2, and 3 was 0% (n=0/42), 11% (n=6/57), 21% (n=7/33), and 83% (n=5/6), respectively, which is lower, particularly for those with a score of 2, than in the original Kumamoto cohort. However, the PPV increased after combining the Kumamoto criteria with a history of orthopedic diseases (spinal canal stenosis and/or carpal tunnel syndrome). Conclusions: This study suggests that the Kumamoto criteria have a favorable diagnostic performance; however, the PPV may decrease depending on the study population. Combining the Kumamoto criteria with the presence of orthopedic disease may improve the PPV.

Application of the Homologous Modeling Technique for Precision Medicine in the Field of Oral and Maxillofacial Surgery.

In the field of oral and maxillofacial surgery, establishment of a new method for predicting morphology is desirable. Therefore, the purpose of the present study was to establish a new method for predicting the original shape of a mandibular defect site using the homologous modeling technique. This study used data from 44 patients who underwent computed tomography in the Department of Oral Surgery at Osaka Medical College. Two types of homologous models were constructed: total mandible (TM) and half mandible (HM). Principal component analysis (PCA) was performed using point cloud data of the homologous model M and homologous model HM, and a multiple regression equation was created using the PC value of TM as the object variable and PC value of HM as the explanatory variable. The predicted PC (M) was created from PC (HM) using a regression formula, back-calculated from point cloud data from PC (M), to create the predicted mandible model. Finally, the original image (TC-M) and estimated mandible were superposed and examined. The mean absolute error between the predicted mandible and actual mandible was 1.04 ± 1.35 mm. We believe that this method will be applicable in actual clinical practice.

Antibacterial, antibiofilm, and antimotility signatures of some natural antimicrobials against Vibrio cholerae.

Vibrio cholerae is an etiological cause of cholera and has been implicated in several epidemics. Exploration of the antimicrobial signatures of culinary spices has become an important industrial tool to suppress the growth of foodborne bacterial pathogens including Vibrio spp. The antibiofilm and antimotility activities of some selected natural antimicrobial agents were then evaluated. All the extracts showed vibriostatic activities with minimum inhibitory concentration (MIC) ranging from 0.1% to 0.4%. Cinnamon and black pepper demonstrated significant biofilm inhibition activity from 94.77% to 99.77% when administered at 100% MIC. Black pepper extract also demonstrated the highest biofilm inhibition activity against the established biofilms of V. cholerae O1 and O139. Cinnamon, calabash nutmeg, and black pepper significantly inhibited swimming and swarming motility by 85.51% to 94.87%. Sub-MICs (50% and 75%) of some extracts were also effective as an antibiofilm and antimotility agent against the tested strains. The findings of our study suggest the potential application of natural antimicrobial agents such as spices in food to inhibit biofilm formation and motility, which consequently mitigate the virulence and persistence of the pathogen in the food supply chain.

Adiabatic Waveforms from Extreme-Mass-Ratio Inspirals: An Analytical Approach.

Scientific analysis for the gravitational wave detector LISA will require theoretical waveforms from extreme-mass-ratio inspirals (EMRIs) that extensively cover all possible orbital and spin configurations around astrophysical Kerr black holes. However, on-the-fly calculations of these waveforms have not yet overcome the high dimensionality of the parameter space. To confront this challenge, we present a user-ready EMRI waveform model for generic (eccentric and inclined) orbits in Kerr spacetime, using an analytical self-force approach. Our model accurately covers all EMRIs with arbitrary inclination and black hole spin, up to modest eccentricity (≲0.3) and separation (≳2-10 M from the last stable orbit). In that regime, our waveforms are accurate at the leading "adiabatic" order, and they approximately capture transient self-force resonances that significantly impact the gravitational wave phase. The model fills an urgent need for extensive waveforms in ongoing data-analysis studies, and its individual components will continue to be useful in future science-adequate waveforms.

How Fluorine Introduction Solves the Spinel Transition, a Fundamental Problem of Mn-Based Positive Electrodes.

In pursuit of high-capacity Mn-based oxides as positive electrode materials for lithium-ion batteries, the changes in the charge-discharge curve due to the spinel transition still stand in the way of the cycling stability. We found in this study that Li1.12Mn0.74O1.60F0.40 (LMOF05) positive electrodes with a loose-crystalline rock salt structure (LCRS), in which F is placed near Mn, show a stable and high capacity (300 mA h g-1, 952 W h kg-1) with little change in the charge-discharge curve. We demonstrated by F K-edge soft X-ray absorption spectroscopy and X-ray diffraction (XRD) that a part of F in the LCRS positive electrode forms F-Mn bonds. Operando XRD/X-ray absorption fine structure measurements revealed the lattice size and Mn surrounding environment during charge/discharge of F-containing LCRS positive electrodes (LMOF05), LCRS-LiMnO2 (LMO), and a spinel-like Li1.1Al0.1Mn1.8O4 positive electrode (SPINEL). Micro- and macroscopic structural changes indicate how the introduction of F suppresses the local spinel transition in Mn-based positive electrodes. These findings should be an effective tool for applying Co-free positive electrode materials for lithium-ion batteries.

Topical Xerostomia Treatment with Hyaluronate Sheets Containing Pilocarpine.

Sjogren's syndrome and radiation therapy for head and neck cancers are often accompanied by xerostomia. Oral pilocarpine (PCP) to treat xerostomia produces systemic side effects, such as runny nose and lacrimation. To improve the therapeutic efficacy of PCP and reduce the aforementioned side effects, we developed a topical delivery system for PCP using freeze-dried sheets of hyaluronic acid (HA). The advantages of HA sheets over conventional oral formulations were examined through in vivo pharmacokinetic and pharmacodynamic studies after their application to oral tissues and salivary glands. The concentration of PCP in the submucosal tissue of the oral cavity was determined using the microdialysis (MD) method after buccal application of HA sheets containing PCP to hamsters. The concentration of PCP in the MD outflow was quite low after gastric administration, whereas the PCP concentration in plasma was high. In contrast, after buccal application of HA sheets containing PCP, the concentration of the drug in the MD outflow increased, despite the negligible concentration in plasma. These findings indicated that both enhancement of saliva secretion and the avoidance of systemic side effects could be achieved through buccal administration of PCP-loaded HA sheets. In addition, the pharmacodynamic study showed that when compared with intravenous and gastric administration, salivary application of HA sheets containing PCP resulted in similar volumes of saliva secretion and reduced lacrimal secretions. In conclusion, freeze-dried HA sheets allow for the development of a novel buccal delivery system with enhanced therapeutic efficacy and safety to treat xerostomia.

A case of acute myocardial infarction due to coronary artery compression by mediastinal hematoma associated with thoracic aortic aneurysm rupture.

A 76-year-old woman was admitted to our department for pneumonia. Although she gradually recovered, she complained of chest and back pain and went into shock. Electrocardiogram showed ST-segment elevation in the inferior leads; thus, an acute inferior myocardial infarction (MI) was strongly suspected. Emergent coronary angiography revealed subtotal right coronary artery (RCA) occlusion, and intravascular ultrasound showed flattening of the RCA ostium. Although the coronary artery flow improved after percutaneous coronary intervention with rescue stent implantation, the patient was still in a prolonged state of shock. Contrast-enhanced computed tomography revealed a ruptured thoracic aortic aneurysm (TAA) with a massive posterior mediastinal hematoma. We presumed that the acute MI and shock were caused by compression of the RCA ostium by the mediastinal hematoma and hemorrhage with TAA rupture, respectively. The patient was urgently transferred to another hospital for surgery. To the best of our knowledge, there has been no report on acute MI due to coronary artery compression by a mediastinal hematoma associated with TAA rupture. A staged therapeutic approach, involving preoperative coronary stent implantation, could be used to save the patient. .

Antibacterial efficacies and time-kill kinetics of indigenous Ghanaian spice extracts against Listeria monocytogenes and some other food-borne pathogenic bacteria.

Increase in food-borne outbreaks has become public health concern worldwide. Exploitation of the antimicrobial properties of dietary spices has become important pharmaceutical tool for controlling food-borne pathogens. This study aimed at evaluating the antibacterial potentials of Ghanaian spices against Listeria monocytogenes and other prevalent food-borne pathogens. In preliminary studies, Listeria was isolated from some food samples. The overall prevalence of Listeria spp. was 23% (13/56). Of the 56 samples examined, 7% showed pathogenic potential for L. monocytogenes. Different solvent extracts of thirteen spices namely Calabash nutmeg, West African black pepper, Aidan, Grains of paradise, Negro pepper, Aniseed, African locust bean, Cinnamon, Black pepper, Clove, Cayenne, Basil, and Rauvolfia were tested for their potentials to inhibit clinical and isolated strains of L. monocytogenes using qualitative and quantitative antimicrobial assay methods. Only clove and negro pepper among the thirteen different solvent extracts showed bacteriostatic and bactericidal activity against L. monocytogenes indicated by minimum inhibitory concentrations ranging from 0.05% to 0.4% and minimum bactericidal concentrations ranging from 0.1% to > 0.4% under experimental conditions. Time-kill study demonstrated listericidal activity of ethanolic clove and negro pepper extracts indicated by absolute mortality of more than 3 log units at 2x MIC and 4x MIC. GC-MS analysis revealed three and eight major chemical components present in clove and negro pepper respectively. Staphylococcus aureus, methicillin-resistant S. aureus, Bacillus cereus, and B. subtilis also showed satisfactory susceptibilities to ethanolic extracts with MIC ranging from 0.025% to > 0.8%. In general, negro pepper showed broad activity eliciting inhibitory effects against all the tested pathogens. The findings suggest that clove and negro pepper may be promising antibacterial candidates for the decontamination and control bacterial pathogens in food and food supply chain.

The effect of simple heat treatment on apatite formation on grit-blasted/acid-etched dental Ti implants already in clinical use.

Grit-blasted/acid-etched titanium dental implants have a moderately roughened surface that is suitable for cell adhesion and exhibits faster osseointegration. However, the roughened surface does not always maintain stable fixation over a long period. In this study, a simple heat treatment at 600°C was performed on a commercially available dental Ti implant with grit-blasting/acid-etching, and its effect on mineralization capacity was assessed by examining apatite formation in a simulated body fluid (SBF). The as-purchased implant displayed a moderately roughened surface at the micrometer scale. Its surface was composed of titanium hydride accompanied by a small amount of alumina particles derived from the grit-blasting. Heat treatment transformed the titanium hydride into rutile without evidently changing the surface morphology. The immersion in SBF revealed that apatite formed on the heated implant at 7 days. Furthermore, apatite formed on the Ti rod surface within 1 day when the metal was subjected to acid and heat treatment without blasting. These indicate that apatite formation was conferred on the commercially available dental implant by simple heat treatment, although its induction period was slightly affected by alumina particles remaining on the implant surface. The heat-treated implant should achieve stronger and more stable bone bonding due to its apatite formation.

Three-Dimensional Geometric Morphometry of Facial Soft Tissue Changes After Bilateral Sagittal Split Ramus Osteotomy.

ABSTRACT: This study aimed to evaluate the performance of geometric morphometry (GM) to assess the changes in facial soft tissue after orthognathic surgery. Subjects were 27 patients (skeletal class III) who underwent bilateral sagittal split ramus osteotomy and 27 volunteers as a control group. Computed tomography images of each patient were obtained before surgery (T0) and 6 months after surgery (T1). Computed tomography images of 27 volunteers (skeletal class I) were also obtained as a control group. Using a three-dimensional (3D) modeling software, 3D models were created and exported to a 3D surface analyzing software for geometric morphometry and principal component (PC) analysis. Significant differences in facial soft tissue were found in the first and second of 15 PC. The first PC represented variation in the lower facial height, and the second PC represented variation in the anterior-posterior position of the chin. Comparing the pre- and post-operative images, they illustrated that lower facial height was decreased, and the chin and lower lip moved posteriorly. Geometric morphometry showed to be a successful tool to isolate surgery-related changes from interindividual morphological variations.

Histological Evaluation of Porous Additive-Manufacturing Titanium Artificial Bone in Rat Calvarial Bone Defects.

Jaw reconstruction using an additive-manufacturing titanium artificial bone (AMTAB) has recently attracted considerable attention. The synthesis of a titanium artificial bone is based on three-dimensional computed tomography images acquired before surgery. A histological evaluation of porous AMTAB (pAMTAB) embedded in rat calvarial bone defects was conducted. This study examined three groups: rats implanted with mixed-acid and heat-treated pAMTAB, rats implanted with untreated pAMTAB, and rats with no implant. In both pAMTAB groups, bone defects were created in rat calvarial bones using a 5-mm trephine bar, followed by pAMTAB implantation. The pAMTAB was fixed to the defect using the fitting force of the surrounding bones. The rats were sacrificed at 4, 8, and 16 weeks after implantation, and the skull was dissected. Undecalcified ground slides were prepared and stained with Villanueva Goldner. Compared with the no implant control group, both pAMTAB groups exhibited new bone formation inside the defect, with greater bone formation in the mixed-acid and heat-treated pAMTAB group than in the untreated pAMTAB group, but the difference was not significant. These data suggest that pAMTAB induces bone formation after implantation in bone defects. Bone formation appears to be enhanced by prior mixed-acid and heat-treated pAMTAB.

Rate-Determining Process at Electrode/Electrolyte Interfaces for All-Solid-State Fluoride-Ion Batteries.

Developing high-performance solid electrolytes that are operable at room temperature is one of the toughest challenges related to all-solid-state fluoride-ion batteries (FIBs). In this study, tetragonal ß-Pb0.78Sn1.22F4, a promising solid electrolyte material for mild-temperature applications, was modified through annealing under various atmospheres using thin-film models. The annealed samples exhibited preferential growth and enhanced ionic conductivities. The rate-determining factor for electrode/electrolyte interface reactions in all-solid-state FIBs was also investigated by comparing ß-Pb0.78Sn1.22F4 with representative fluoride-ion- and lithium-ion-conductive materials, namely, LaF3, CeF3, and Li7La3Zr2O12. The overall rate constant of the interfacial reaction, k0, which included both mass and charge transfers, was determined using chronoamperometric measurements and Allen-Hickling simulations. Arrhenius-type correlations between k0 and temperature indicated that activation energies calculated from k0 and ionic conductivities (σion) were highly consistent. The results indicated that the mass transfer (electrolyte-side fluoride-ion conduction) should be the rate-determining process at the electrode/electrolyte interface. ß-Pb0.78Sn1.22F4, with a large σion value, had a larger k0 value than Li7La3Zr2O12. Therefore, it is hoped that the development of high-conductivity solid electrolytes can lead to all-solid-state FIBs with superior rate capabilities similar to those of all-solid-state Li-ion batteries.

Characteristics of craniofacial morphology and factors affecting them in patients with isolated cleft palate.

BACKGROUND: Myriad maxillo-mandibular occlusal relationships are observed in patients with isolated cleft palate (ICP), unlike in patients with other cleft types, such as cleft lip and palate. OBJECTIVES: This study aimed to categorise the characteristics of craniofacial morphology in patients with ICP, and investigate the clinical factors affecting these categorised morphological characteristics. METHODS: Thirty-six girls with ICP (age (mean ± SD): 5.36 ± 0.36 years) underwent cephalometric measurement. Their craniofacial morphology was categorised using cluster analysis. Profilograms were created and superimposed onto the standard Japanese profilograms to visualise the morphological characteristics of each group (cluster). The mean values and variations in the linear and angular measurements of each group were compared with the Japanese standards and statistically analysed using Dunnett's test after the analysis of variance. Fisher's exact test was used to analyse the differences between the cleft types (cleft in the hard and/or soft palate) and skills of the operating surgeons in the groups. RESULTS: Cluster analysis of craniofacial morphologies in patients with ICP resulted in the formation of three categories: the first cluster exhibited a relatively harmonious anteroposterior relationship between the maxilla and the mandible (22.2%); the second cluster exhibited crossbite owing to a significantly smaller maxilla (33.3%); and the third cluster exhibited a smaller mandible with posterior rotation showing skeletal class II malocclusion (44.4%). Differences in cleft types and surgeons were not associated with the distribution of patients in each cluster. CONCLUSIONS: Patients with ICP exhibited characteristic morphological patterns, such as bimaxillary retrusion or severe mandibular retrusion, besides the anterior crossbite frequently found in patients with cleft lip and palate . Understanding the typical morphological characteristics could enable better diagnostic categorisation of patients with ICP, which may eventually improve orthodontic treatment planning.

Bioactivation Treatment with Mixed Acid and Heat on Titanium Implants Fabricated by Selective Laser Melting Enhances Preosteoblast Cell Differentiation.

Selective laser melting (SLM) is a promising technology capable of producing individual characteristics with a high degree of surface roughness for implants. These surfaces can be modified so as to increase their osseointegration, bone generation and biocompatibility, features which are critical to their clinical success. In this study, we evaluated the effects on preosteoblast proliferation and differentiation of titanium metal (Ti) with a high degree of roughness (Ra = 5.4266 ± 1.282 µm) prepared by SLM (SLM-Ti) that was also subjected to surface bioactive treatment by mixed acid and heat (MAH). The results showed that the MAH treatment further increased the surface roughness, wettability and apatite formation capacity of SLM-Ti, features which are useful for cell attachment and bone bonding. Quantitative measurement of osteogenic-related gene expression by RT-PCR indicated that the MC3T3-E1 cells on the SLM-Ti MAH surface presented a stronger tendency towards osteogenic differentiation at the genetic level through significantly increased expression of Alp, Ocn, Runx2 and Opn. We conclude that bio-activated SLM-Ti enhanced preosteoblast differentiation. These findings suggest that the mixed acid and heat treatment on SLM-Ti is promising method for preparing the next generation of orthopedic and dental implants because of its apatite formation and cell differentiation capability.

Evaluation of the effect of oral appliance treatment on upper-airway ventilation conditions in obstructive sleep apnea using computational fluid dynamics.

Objective: To evaluate the effect of oral appliance (OA) treatment on upper-airway ventilation conditions in patients with obstructive sleep apnea (OSA) using computational fluid dynamics (CFD).Methods: Fifteen patients received OA treatment and underwent polysomnography (PSG) and computed tomography (CT). CT data were used to reconstruct three-dimensional models of nasal and pharyngeal airways. Airflow velocity and airway pressure measurements at inspiration were simulated using CFD.Results: The apnea-hypopnea index (AHI) improved from 23.1 to 10.1 events/h after OA treatment. On CFD analysis, airflow velocity decreased at the retropalatal and epiglottis-tip levels, while airway pressure decreased at the retropalatal, uvular- and epiglottis-tip levels. The AHI of patients with OSA before OA treatment was correlated with airway pressure at the epiglottis-tip level.Discussion: Treatment with OA improved the ventilation conditions of the pharyngeal airway and AHI. Results of CFD analysis of airway pressure and airflow velocity helped determine the severity and ventilatory impairment site of OSA, respectively.

Comparative evaluation of microbial profiles of oral samples obtained at different collection time points and using different methods.

OBJECTIVES: Recently, the oral microbiome has been found to be associated with oral and general health status. Although various oral sample collection protocols are available, the potential differences between the results yielded by these protocols remain unclear. In this study, we aimed to determine the effects of different time points and methods of oral sample collection on the outcomes of microbiome analysis. MATERIALS AND METHODS: Oral samples were collected from eight healthy individuals at four different time points: 2 h after eating, immediately after teeth brushing, immediately after waking up, and 2 h after eating on the subsequent day. Four methods of saliva collection were evaluated: spitting, gum chewing, cotton swab, and oral rinse. Oral microbiomes of these samples were compared by analyzing the bacterial 16S rRNA gene sequence data. RESULTS: The oral microbial composition at the genus level was similar among all sample collection time points and methods. Alpha diversity was not significantly different among the groups, whereas beta diversity was different between the spitting and cotton swab methods. Compared with the between-subject variations, the weighted UniFrac distances between the groups were not minor. CONCLUSIONS: Although the oral microbiome profiles obtained at different collection time points and using different methods were similar, some differences were detected. CLINICAL RELEVANCE: The results of the present study suggest that although all the described protocols are useful, comparisons among microbiomes of samples collected by different methods are not appropriate. Researchers must be aware of the issues regarding the impact of saliva collection methods.

Mechanical, Histological, and Scanning Electron Microscopy Study of the Effect of Mixed-Acid and Heat Treatment on Additive-Manufactured Titanium Plates on Bonding to the Bone Surface.

The additive manufacturing (AM) technique has attracted attention as one of the fully customizable medical material technologies. In addition, the development of new surface treatments has been investigated to improve the osteogenic ability of the AM titanium (Ti) plate. The purpose of this study was to evaluate the osteogenic activity of the AM Ti with mixed-acid and heat (MAH) treatment. Fully customized AM Ti plates were created with a curvature suitable for rat calvarial bone, and they were examined in a group implanted with the MAH-treated Ti in comparison with the untreated (UN) group. The AM Ti plates were fixed to the surface of rat calvarial bone, followed by extraction of the calvarial bone 1, 4, 8, and 12 weeks after implantation. The bonding between the bone and Ti was evaluated mechanically. In addition, AM Ti plates removed from the bone were examined histologically by electron microscopy and Villanueva-Goldner stain. The mechanical evaluation showed significantly stronger bone-bonding in the MAH group than in the UN group. In addition, active bone formation was seen histologically in the MAH group. Therefore, these findings indicate that MAH resulted in rapid and strong bonding between cortical bone and Ti.