Oxidation and Tribological Behavior of Ti-B-C-N-Si Nanocomposite Films Deposited by Pulsed Unbalanced Magnetron Sputtering.

Quinary Ti-B-C-N-Si nanocomposite films were deposited onto AISI 304 substrates using a pulsed d.c. magnetron sputtering system. The quinary Ti-B-C-N-Si (5 at.%) film showed excellent tribological and wear properties compared with those of the Ti-B-C-N films. The steady friction coefficient of 0.151 and a wear rate of 2 × 10-6 mm3N-1m-1 were measured for the Ti-B-C-N-Si films. The oxidation behavior of Ti-B-C-N-Si nanocomposite films was systematically investigated using X-ray diffraction (XRD), and thermal analyzer with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). It is concluded that the addition of Si into the Ti-B-C-N film improved the tribological properties and oxidation resistance of the Ti-B-C-N-Si films. The improvements are due to the formation of an amorphous SiOx phase, which plays a major role in the self-lubricant tribo-layers and oxidation barrier on the film surface or in the grain boundaries, respectively.

Surface characteristic of chemically converted graphene coated low carbon steel by electro spray coating method for polymer electrolyte membrane fuel cell bipolar plate.

Graphene was coated on low carbon steel (SS400) by electro spray coating method to improve its properties of corrosion resistance and contact resistance. Exfoliated graphite was made of the graphite by chemical treatment (Chemically Converted Graphene, CCG). CCG is distributed using dispersing agent, and low carbon steel was coated with diffuse graphene solution by electro spray coating method. The structure of the CCG was analyzed using XRD and the coating layer of surface was analyzed using SEM. Analysis showed that multi-layered graphite structure was destroyed and it was transformed in to fine layers graphene structure. And the result of SEM analysis on the surface and the cross section, graphene layer was uniformly formed with 3-5 microm thickness on the surface of substrate. Corrosion resistance test was applied in the corrosive solution which is similar to the polymer electrolyte membrane fuel cell (PEMFC) stack inside. And interfacial contact resistance (ICR) test was measured to simulate the internal operating conditions of PEMFC stack. As a result of measuring corrosion resistance and contact resistance, it could be confirmed that low carbon steel coated with CCG was revealed to be more effective in terms of its applicability as PEMFC bipolar plate.

Preparation and characterization of gold-decorated graphite nanosheet composites.

Some composites of gold nanoparticles and graphite nanosheets were prepared by electrostatic interaction, and structurally and electrochemically characterized using X-ray diffraction, X-ray photoelectron spectroscopy, UVNis spectroscopy, transmission electron microscopy, and cyclic-voltammetry. Pristine graphite was chemically treated using aqueous acid solution, and dispersed inpoly(diallyldimethylammonium) chloride aqueous solution to prepare positively charged graphite nanosheets. The gold nanoparticles (GNPs) in this work were stabilized by sodium dodecyl sulfate, poly(sodium 4-styrene sulfonate), or poly(vinylpyrrolidone). Gold nanoparticles and graphite nanosheet composites with gold nanoparticles showed the characteristic surface plasmon band at -530 nm. The electrochemical properties of the graphite nanosheet composites with gold nanoparticles were studied by cyclic voltammetry, in which reduction potential and reduction current of gold nanoparticles were strongly dependent on the gold-wrapped stabilizer in the composites.

Characterization of carbon nanotube-cdse hybrid nanomaterials.

MWNT-CdSe hybrid nanomaterials were prepared with carboxylic acid-treated CdSe nanoparticles and amino-functionalized MWNTs. The hybridization of MWNT-CdSe nanomaterials was performed by the formation of covalent bond between MWNT and CdSe. Their covalent bond lengths were varied with changing the linking spacers. Amino-functionalized MWNTs were reacted with CdSe nanoparticles which were functionalized with carboxylic acid groups. Their detailed structures were characterized by FT-IR, XPS, and small angle X-ray scattering. Through small angle X-ray scattering experiments, it was found that the structures of CdSe nanoparticles were not regular, and their sizes were broadly distributed in solution. The longer amino-functionalized MWNTs were thermally decomposed at lower temperature. The photoluminescence (PL) of chemically-linked MWNT-CdSe hybrid nanomaterials were weaker than that of CdSe nanoparticles. In addition, their PL intensities more weakened on the MWNT-CdSe with the longer spacers.

Characterization of attractive interaction-driven carbon nanotube composites with Cd-based nanoparticles.

Multiwalled carbon nanotube (MWNT) composites with cadmium telluride (CdTe) or cadmium selenide (CdSe) nanoparticles were prepared via electrostatic interaction. The MWNTs were modified with carboxylic acid groups. Both the CdTe and CdSe nanoparticles were stabilized with 2-(dimethylamino) ethanethiol hydrochloride to develop positive charges on their surfaces in water. They were characterized in detail via UV-visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The energy state of the MWNTs was significantly modified by the electrostatic binding between the nanoparticles and carboxylated MWNTs, resulting in absorption at approximately 250 nm. XPS analysis also proved the electronic redistribution of the nanoparticles and the MWNTs. The binding energies of the elements Cd, Se, and Te were definitely changed by the attractive interaction between the nanoparticles and the MWNTs. The distribution of the CdTe or CdSe nanoparticles and the morphologies of the MWNT composites were deliberately investigated from TEM images and XRD.