Experimental and Theoretical Study on the Nonmagnetic Li/Mg Cosubstitution in the Gd5-x(Li/Mg)xGe4 (x = 1.04, 1.17, 1.53) System.

Three Li- and Mg-cosubstituted compounds in the Gd5-x(Li/Mg)xGe4 (x = 1.04(2), 1.17(2), 1.53(2)) system have been successfully prepared by conventional high-temperature reactions. According to powder and single-crystal X-ray diffraction analyses, all three compounds adopt a Gd5Si4-type phase with the orthorhombic Pnma space group (Pearson code oP16, Z = 4) and six crystallographically independent atomic sites. The crystal structure can be described as a combination of two-dimensional Mo2FeB2-type ∞2[Gd2(Li/Mg)Ge2] layers and [Ge2] dimers. Interestingly, as 64% of Li and 26% of Gd at the RE3 and RE2 sites, respectively, were exclusively substituted by Mg in Gd3.47(1)Li0.36(2)Mg1.17(3)Ge4, the lattice parameter b was selectively shortened as a result of the RE3-Ge1 bond shrinkage in comparison to that in Gd4LiGe4, while lattice parameters a and c remained nearly intact. A series of theoretical calculations using the tight-binding linear muffin-tin orbital (TB-LMTO) method indicated that the reduction of the particular RE3-Ge1 bond distance in the title compounds could also be explained by an optimization of bonding based on the corresponding RE3-Ge1 crystal orbital Hamilton population (COHP) curve. Moreover, the specific site preference of Mg for the RE3 site was supported by both size-factor as well as electronic-factor criteria on the basis of the smallest atomic size and the highest electronegativity of Mg among the three cations. Therefore, the overall electronic structure was further interrogated by a density of states (DOS) analysis. The influence of nonmagnetic Li/Mg cosubstitution for the magnetic Gd atoms in the title Gd5-x(Li/Mg)xGe4 system on the magnetic characteristics was also thoroughly studied by isofield magnetization at 100 Oe and 10 kOe and isothermal magnetization measurements at 4 K using two of the title compounds: Gd3.83(1)Li0.48Mg0.69(3)Ge4 and Gd3.47(1)Li0.36(2)Mg1.17(3)Ge4.

Anionic Doping and Cationic Site Preference in CaYb4Al2Sb6- xGe x ( x = 0.2, 0.5, 0.7): Origin of the Enhanced Seebeck Coefficient and the Structural Transformation.

Three Zintl phase compounds belonging to the CaYb4Al2Sb6- xGe x ( x = 0.2, 0.5, 0.7; nominal compositions) system with various Ge-doping contents were successfully synthesized by arc-melting and were initially crystallized in the Ba5Al2Bi6-type phase (space group Pbam, Pearson codes oP26). However, after post-heat treatment at an elevated temperature, the originally obtained crystal structure was transformed into the homeotypic Ca5Ga2Sb6-type structure according to powder and single-crystal X-ray diffraction analyses. Two types of crystal structures share some isotypic structural moieties, such as the one-dimensional anionic chains formed by ∞1[Al2Sb8] and the void-filling Ca2+/Yb2+ mixed cations, but the slightly different spatial arrangements in each unit cell make these two structural types distinguishable. This series of title compounds is originally investigated to examine whether anionic p-type doping using Ge can successfully enhance thermoelectric (TE) properties of the Yb-rich CaYb4Al2Sb6- xGe x series even after the phase transition from the Ba5Al2Bi6-type to the Ca5Ga2Sb6-type phase. More interestingly, we also reveal that the given structural transformation is triggered by the particularly different site-preference of Ca2+ and Yb2+ among three available cationic sites in each structure type, which is significantly affected by thermodynamic conditions of this system. Band structure and density of states analyses calculated by density functional theory using the tight-binding linear muffin-tin orbital method also prove that the Ge-doping actually increases band degeneracies and the number of resonant peaks near the Fermi level resulting in the improvement of Seebeck coefficients. Electron localization function analyses for the (0 1 0) sliced-plane and the 3D isosurface nicely illustrates the distortion of the paired-electron densities due to the introduction of Ge. The systematic TE property measurements imply that the attempted anionic p-type doping is indeed effective to improve the TE characteristics of the title CaYb4Al2Sb6- yGe y system.

Environmental benign synthesis, characterization and mechanism studies of green calcium hydroxide nano-plates derived from waste oyster shells.

Continuous dumping of oyster shells in open fields has been a global issue, causing serious problems in the water and human health. The conversion of those wastes into value-added products is highly desirable. Here, Green Calcium Hydroxide Nano-plates (GCHNPs) were first synthesized from waste oyster shells by a chemical precipitation method in an aqueous medium at 90 °C without using any additives. The crystal structure with a hexagonal portlandite (Ca(OH)2) was observed by both X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The crystal size of around 350-450 nm and specific surface area with 4.96 m2g-1 were confirmed by field emission scanning electron microscopy (FE-SEM) and Brunauer-Emmett-Teller (BET), respectively. In addition, a schematically organized new qualitative model for a mechanism was proposed to explain the genesis and evolution of GCHNPs from raw oyster shells.

Effect of MultiSubstitution on the Thermoelectric Performance of the Ca11-xYbxSb10-yGez (0 ≤ x ≤ 9; 0 ≤ y ≤ 3; 0 ≤ z ≤ 3) System: Experimental and Theoretical Studies.

The Zintl phase solid-solution Ca11-xYbxSb10-yGez (0 ≤ x ≤ 9; 0 ≤ y ≤ 3; 0 ≤ z ≤ 3) system with the cationic/anionic multisubstitution has been synthesized by molten Sn metal flux and arc-melting methods. The crystal structure of the nine title compounds were characterized by both powder and single-crystal X-ray diffractions and adopted the Ho11Ge10-type structure with the tetragonal space group I4/mmm (Z = 4, Pearson Code tI84). The overall isotypic structure of the nine title compounds can be illustrated as an assembly of three different types of cationic polyhedra sharing faces with their neighboring polyhedra and the three-dimensional cage-shaped anionic frameworks consisting of the dumbbell-shaped Sb2 units and the square-shaped Sb4 or (Sb/Ge)4 units. During the multisubstitution trials, interestingly, we observed a metal-to-semiconductor transition as the Ca and Ge contents increased in the title system from Yb11Sb10 to Ca9Yb2Sb7Ge3 (nominal compositions) on the basis of a series of thermoelectric property measurements. This phenomenon can be elucidated by the suppression of a bipolar conduction of holes and electrons via an extra hole-carrier doping. The tight-binding linear muffin-tin orbital calculations using four hypothetical structural models nicely proved that the size of a pseudogap and the magnitude of the density of states at the Fermi level are significantly influenced by substituting elements as well as their atomic sites in a unit cell. The observed particular cationic/anionic site preferences, the historically known abnormalities of atomic displacement parameters, and the occupation deficiencies of particular atomic sites are further rationalized by the QVAL value criterion on the basis of the theoretical calculations. The results of SEM, EDS, and TGA analyses are also provided.

Pb2 BO3 Cl: A Tailor-Made Polar Lead Borate Chloride with Very Strong Second Harmonic Generation.

A meticulously designed, polar, non-centrosymmetric lead borate chloride, Pb2 BO3 Cl, was synthesized using KBe2 BO3 F2 (KBBF) as a model. Single-crystal X-ray diffraction revealed that the structure of Pb2 BO3 Cl consists of cationic [Pb2 (BO3 )](+) honeycomb layers and Cl(-) anions. Powder second harmonic generation (SHG) measurements on graded polycrystalline Pb2 BO3 Cl indicated that the title compound is phase-matchable (type I) and exhibits a remarkably strong SHG response, which is approximately nine times stronger than that of potassium dihydrogen phosphate, and the largest efficiency observed in materials with structures similar to KBBF. Further characterization suggested that the compound melts congruently at high temperature and has a wide transparency window from the near-UV to the mid-IR region.

Cationic Site-Preference in the Yb14-xCaxAlSb11 (4.81 ≤ x ≤ 10.57) Series: Theoretical and Experimental Studies.

Four quaternary Zintl phases with mixed-cations in the Yb14-xCaxAlSb11 (4.81 ≤ x ≤ 10.57) series have been synthesized by using the arc-melting and the Sn metal-flux reaction methods, and the isotypic crystal structures of the title compounds have been characterized by both powder and single-crystal X-ray diffraction (PXRD and SXRD) analyses. The overall crystal structure adopting the Ca14AlSb11-type can be described as a pack of four different types of the spiral-shaped one-dimensional octahedra chains with various turning radii, each of which is formed by the distorted ((Yb/Ca)Sb6) octahedra. Four symmetrically-independent cationic sites contain mixed occupations of Yb2+ and Ca2+ with different mixing ratios and display a particular site preference by two cationic elements. Two hypothetical structural models of Yb4Ca10AlSb11 with different cationic arrangements were designed and exploited to study the details of site and bond energies. QVAL values provided the rationale for the observed site preference based on the electronegativity of each atom. Density of states (DOS) curves indicated a semiconducting property of the title compounds, and crystal orbital Hamilton population (COHP) plots explained individual chemical bonding between components. Thermal conductivity measurement was performed for Yb8.42(4)Ca5.58AlSb11, and the result was compared to compounds without mixed cations.

Single-crystal growth and size control of three novel polar intermetallics: Eu2.94(2)Ca6.06In8Ge8, Eu3.13(2)Ca5.87In8Ge8, and Sr3.23(3)Ca5.77In8Ge8 with crystal structure, chemical bonding, and magnetism studies.

Three new quaternary polar intermetallic compounds of Eu2.94(2)Ca6.06In8Ge8, Eu3.13(2)Ca5.87In8Ge8, and Sr3.23(3)Ca5.77In8Ge8 have been synthesized by a metal-flux method using molten indium metal as a reactive flux, and the novel isotypic crystal structures have been characterized by both powder and single-crystal X-ray diffractions. All compounds crystallize in the orthorhombic space group Pmmn (Z = 2, Pearson symbol oP50) with 14 crystallographically unique atomic positions in the asymmetric unit. The lattice parameters are refined as follows: a = 36.928(2) Å, b = 4.511(1) Å, and c = 7.506(1) Å for Eu2.94(2)Ca6.06In8Ge8; a = 37.171(19) Å, b = 4.531(2) Å, and c = 7.560(4) Å for Eu3.13(2)Ca5.87In8Ge8; and a = 37.350(2) Å, b = 4.550(3) Å, and c = 7.593(4) Å for Sr3.23(3)Ca5.77In8Ge8. In particular, single crystals of two Eu-containing compounds are obtained as bundles of bar/needle-shaped crystals, and the thicknesses of those crystals can be controlled in the range between ca. 300 µm and ca. <10 µm by adjusting several reaction conditions, including the reaction cooling rate and the centrifugation temperature. The overall crystal structure is illustrated as an assembly of (1) the three-dimensional anionic framework, which is formed by the chains of edge-sharing InGe4 tetrahedra and the annulene-like "12-membered anionic rings" connected via Ge2 dimers, and (2) the cationic mixed sites embedded in the space between the anionic frameworks. Theoretical investigations based on tight-binding linear muffin-tin orbital (TB-LMTO) calculations provide a comprehesive understanding of the overall electronic structure and chemical bonding observed among anionic components and between anions and cations. Electron localization function (ELF) and electron density map present chemical bond strengths and polarization within the anionic framework. Magnetic susceptibility measurement proves an antiferromagnetic (AFM) ordering of Eu atoms below 4 K with a reduced effective magnetic moment of 7.12 µB for the Eu atom.