RESUMO
Intermittent delivery of parathyroid hormone (PTH) could effectively promote bone regeneration, but the need for daily injection administration has limited its further clinical applications. Exposure to magnetic stimulation could regulate cell fate to promote osteogenesis. Herein, we developed a magnetized hydrogel with programmed PTH release and simultaneous magnetic actuation to promote osteogenic commitment. Ag dual-cross-linked hydrogel was formulated as GelMA-PVA (GP) biphasic reservoir with magnetic nanoparticles (GPM) and PTH (GPMP). Macroscopic and microscopic characterizations were performed to optimize the formulations. In vitro release assessment confirmed the programmable release of PTH with a pulsatile profile primed via magnetization in the first 4 days and a sustained release, controlled by an optimized GP matrix, for over a month. Stimulated by an alternating magnetic field, the hydrogels displayed a zigzag-shaped pulsatile release profile, and the cumulative release was enhanced by 8, 28, and 18% in In40, Ab40, and In20Ab20 (loading 40 µg PTH via incorporation, absorption, and their combination) formulations, respectively, compared with the same formulations without magnetic stimulation. An in vitro cytocompatibility test showed that all formulations were biocompatible and that PTH addition significantly promoted the proliferation of MC3T3-E1 pre-osteoblasts. In vivo studies presented enhanced new bone regeneration with significantly improved bone volume and bone mineral density in GPM and GPMP groups (increased by 120 and 251% compared with those of non-treated control), confirming their osteogenic effects and accelerated bone healing. This newly developed GPMP sample provides simultaneous osteogenesis effects via the programmed release of PTH and magnetically promoted bone regeneration and is promising in the facilitation of bone healing and treatment of various delayed/non-union conditions without the burden of daily injection.
Assuntos
Hidrogéis , Hormônio Paratireóideo , Hormônio Paratireóideo/farmacologia , Hidrogéis/farmacologia , Regeneração Óssea , Osteogênese , Fenômenos MagnéticosRESUMO
A chitosan-pectin (CS-PEC) biopolymeric hydrogel wound dressing was investigated for lidocaine delivery. Here we demonstrate for the first time the feasibility of three-dimensional (3D) printed CS-PEC hydrogel incorporating the local anaesthetic drug lidocaine hydrochloride (LDC) as a potential wound dressing candidate. The hydrogels were prepared by physical crosslinking of CS and PEC polysaccharides. The scaffolds were printed using an extrusion-based 3D printer using a mechanical positive displacement dispensing system followed by lyophilisation. The 3D printed hydrogels showed good printability, dimensional integrity and self-adhesion to skin. The high swelling ratio and water absorption of 3D printed hydrogels indicated suitability for absorbing exudates and maintaining a moist wound healing environment. Fourier transform infrared (FTIR) spectroscopy results indicated that the CS-PEC hydrogel was formed by hydrogen bonds. Incorporation of LDC in the hydrogel did not interfere with its functional stability. In vitro drug release studies of LDC over 6â¯h fitted the Korsmeyer-Peppas model. This work demonstrates the possibility of a 3D printed hydrogel as a suitable candidate for wound dressings.
Assuntos
Bandagens , Quitosana/química , Sistemas de Liberação de Medicamentos , Hidrogéis/química , Lidocaína/farmacologia , Pectinas/química , Impressão Tridimensional , Adesividade , Varredura Diferencial de Calorimetria , Liberação Controlada de Fármacos , Estudos de Viabilidade , Cinética , Espectroscopia de Infravermelho com Transformada de Fourier , Alicerces Teciduais/química , ÁguaRESUMO
This study investigated a chemically crosslinked poly(vinyl alcohol) (PVA) hydrogel controlled drug delivery system to deliver the anti-inflammatory drug dexamethasone (DEX). The PVA hydrogels, with different crosslinking densities, were characterized by swelling studies, electron scanning microscopy, viscosity, Fourier transform infrared spectroscopy (FTIR) and in vitro release assessment. Increasing crosslinking density slowed and decreased swelling and water absorption. FTIR analysis suggested DEX has possible interactions with the crosslinker and the PVA polymer. In vitro release of DEX from PVA hydrogels was sustained for 33 days and appeared to fit the Higuchi and Korsmeyer-Peppas models. This work indicates the likelihood of PVA hydrogel as a controlled drug release system for DEX for anti-inflammatory uses.
Assuntos
Anti-Inflamatórios/administração & dosagem , Preparações de Ação Retardada/química , Dexametasona/administração & dosagem , Hidrogéis/química , Álcool de Polivinil/química , Anti-Inflamatórios/química , Reagentes de Ligações Cruzadas/química , Dexametasona/química , Liberação Controlada de Fármacos , Espectroscopia de Infravermelho com Transformada de Fourier , ViscosidadeRESUMO
This study reports on the fabrication of a controlled release system for the delivery of levonorgestrel (LNG) for long-term contraception. LNG was encapsulated in chemically cross-linked chitosan (CS) microspheres, and microspheres presented a spherical geometry with a good particle size distribution (polydispersity index (PDI) < 0.1). The LNG-CS microspheres were classified based on their particle size range, <63, 63-125, and 125-300 µm, where the 125-300 µm particles were selected to be incorporated into a physically cross-linked and annealed PVA hydrogel matrix to prolong the drug release. PVA concentrations and the annealing treatment influenced the swelling behavior of PVA hydrogels. Fourier transform infrared (FTIR) spectroscopy indicated that CS was successfully cross-linked through the formation of a Schiff base; the PVA hydrogel was formed through hydrogen bonding without reacting with LNG, which was only physically entrapped, thus maintaining its stability. Differential scanning calorimetry (DSC) showed that freeze-thaw and annealing processes increased the degree of crystallinity in the PVA hydrogel. In vitro drug release assessments for all formulations showed zero order without any burst release. Over a period of 100 days, 34, 27, and 21% of LNG was released from the CS-LNG microspheres in the size ranges < 63, 63-125, and 125-300 µm, respectively, while only 14, 11, and 9% of LNG was released when the CS-LNG microspheres were incorporated into 10, 15, and 20% PVA hydrogels, respectively. The drug release kinetics exhibited both diffusion- and swelling-controlled mechanisms following the Korsmeyer-Peppas model. This work presents a promising delivery system for long-term contraception with controlled zero-order release behaviors.
RESUMO
Customisation of sustained and controlled release of contraceptives plays a key role in veterinary applications. A biodegradable projectile containing different doses of contraceptive progesterone was prepared using fused deposition modelling 3D printing. Three concentrations of progesterone (2, 5 and 10% w/w) with polylactic acid was prepared as a 1.75â¯mm filament by hot melt extrusion. Solvent dissolution tests confirmed the successful incorporation of progesterone in the polymer while microscopic (SEM) studies indicated the drug was melted and thoroughly mixed with the polymer matrix and pore-formation after dissolution. A significant suppression of melting temperature of polymer from 166 to 145⯰C was noted by thermal analysis (DSC) studies of the drug loaded systems. Interaction between the contraceptive drug and the polymer via hydrogen bonding was revealed from the spectroscopic (FTIR) studies. In vitro release behaviour was assessed over a five-month period, for 2% and 5% progesterone loaded projectiles release profiles fitted zero order whereas 10% loaded projectiles fitted the Higuchi model. Penetration assessment confirmed the drug loaded PLA projectiles provided sufficient specific kinetic energy required to penetrate thin and medium-thickness skins. This work demonstrates the feasibility of fused deposition modelling 3D printing as suitable process for manufacturing ballistic customised drug delivery devices.