Synthesis and characterization of silver-nanoparticle-impregnated fiberglass and utility in water disinfection.

A number of researchers have deployed silver (Ag) nanoparticles through a number of techniques on various substrates including carbon, zeolites and polymers for water disinfection applications. However, Ag impregnated on an inorganic fiberglass surface through a simple electroless process was only recently reported for the first time. Fiberglass impregnated with Ag nanoparticles displays superior performance over carbon-based silver support systems but little is known about the factors that affect the architecture of the system, its interfacial properties and its consequent bactericidal activity. In this study, Ag content and particle size on a fiberglass substrate were manipulated by adjusting the AgNO(3) concentration, immersion time, temperature, solution pH and reduction temperature. The reduction chemistry of the Ag-nanoparticle-impregnated fiberglass is described and supported with thermal gravimetric analysis (TGA) and photoelectron spectroscopy (XPS) measurements. The Ag content along with the particle size and particle size distribution were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS) and x-ray diffraction (XRD). The Ag content on the fiberglass mats ranged from 0.04 to 4.7 wt% Ag/g-fiber with a size distribution of 10-900 nm under standard processing conditions. Inductively coupled plasma mass spectrometry (ICP-MS) was used to analyze the Ag desorption from the fiberglass substrate, while the bactericidal properties were evaluated against Escherichia coli (E. coli).

Adsorption of rotavirus and bacteriophage MS2 using glass fiber coated with hematite nanoparticles.

Batch and flow-through experiments were conducted to investigate the removal and inactivation of rotavirus (RV) and bacteriophage MS2 using glass fiber coated with hematite nanoparticles. Batch tests showed a high removal of MS2 (2.49x10(11) plaque forming unit/g) and RV (8.9x10(6) focal forming unit/g) at a low concentration of hematite nanoparticles in solution (0.043g/L and 0.26g/L, respectively). Virus adsorption was, however, decreased in the presence of bicarbonate ions and natural organic matter (NOM) in solution, suggesting a great affinity of iron oxide nanoparticles for these competitors. Adsorption on hematite nanoparticles by MS2 and RV was also tested with aquifer groundwater under saturated flow conditions to mimic environmental conditions with promising results (8x10(8) plaque forming unit/g and 3x10(4) focal forming unit/g, respectively). Desorption of up to 63% of infectious MS2 and only 2% of infectious RV from hematite nanoparticles were achieved when an eluant solution containing beef extract and glycine was used. Transmission electron microscopy (TEM) images showed evidence of electrostatic adsorption of apparently intact MS2 and structurally damaged RV particles to hematite nanoparticles. Results from this research suggest that a cartridge made of glass fiber coated with hematite nanoparticles could be used as a point-of-use device for virus removal for drinking water treatment.

Bactericidal activity of Ag nanoparticle-impregnated fibreglass for water disinfection.

A new bactericidal system composed of fibreglass impregnated with silver (Ag) nanoparticles was developed and tested. Silver content, particle size and distribution were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The antibacterial effectiveness was evaluated against Escherichia coli (E. coli, ATCC 29055). The minimum inhibitory loading was determined to be less than 1.8 wt% of silver nanoparticles per gram of fibreglass. In a 1 h immersion test, using a 0.1 mg fibreglass mat ml(-1), with 2.9 wt% loading of silver nanoparticles completely disinfected 100 ml of 10(6) CFU ml(-1) of E. coli, dramatically outperforming activated carbon fibres impregnated with silver. Inactivation rate studies of 0.05 mg fibreglass mat ml(-1) (Ag 1.8 wt%) with 10(12) CFU E. coli displayed a 7 log reduction in 5 minutes. The activation and reuse of fibreglass (Ag 4.3 wt%) maintained its full effectiveness after two cycles of use and thermal regeneration at 350 degrees C.