Spirooxazine-Based Dual-Sensing Probe for Colorimetric Detection of Cu2+ and Fe3+ and Its Application in Drinking Water and Rice Quality Monitoring.

A spirooxazine derivative, PheSPO (3,3-dimethyl-1-phenethylspiro[indoline-2,3'-naphtho[2,1-b][1,4]oxazine]), as a dual-sensing probe for Cu2+ and Fe3+ was synthesized, and its structure was confirmed by 1H NMR, 13C NMR, HRMS, and single-crystal X-ray diffraction. The results reveal that the PheSPO probe is selective to both Cu2+ and Fe3+ through distinct colorimetric responses in acetonitrile. The sensing performance of PheSPO toward Cu2+ was investigated, and upon addition of Cu2+, an instant change in color from colorless to bright yellow with a strong absorption band at 467 nm was observed. Due to a dual-sensing behavior, PheSPO also exhibits a unique response toward Fe3+ that can be discovered from a color change from colorless to red at an absorption wavelength of 514 nm. Based on spectroscopic analyses and density functional theory calculations, the 1:1 stoichiometric complexation of PheSPO with the targeted metal ions was proposed and the binding constants of 1.95 × 103 M-1 for Cu2+ and 1.29 × 103 M-1 for Fe3+ were obtained. In addition, the detection limits of PheSPO for Cu2+ and Fe3+ were 0.94 and 2.01 µM, respectively. To verify its applicability in real samples, PheSPO was further explored for quantitative determination of both Cu2+ and Fe3+ in spiked drinking water. The results showed that the recoveries of Cu2+ and Fe3+ examined using the PheSPO probe were found comparable to those obtained from atomic absorption spectroscopy. Moreover, the PheSPO strip test was developed, and its utilization for qualitative detection of Fe3+ in real rice samples was demonstrated.

Titanium Complexes of Salicylbenzoxazole and Salicylbenzothiazole Ligands for the Ring-Opening Polymerization of ε-Caprolactone and Substituted ε-Caprolactones and Their Copolymerizations.

Two series of titanium complexes, including salicylbenzoxazole titanium complexes (1-4) and salicylbenzothiazole titanium complexes (5-8), were successfully synthesized and characterized by NMR spectroscopy, elemental analysis, and X-ray diffraction crystallography (for 2 and 5). The 1H NMR spectra of complexes 7 and 8 reveal fluxional behavior in solution at room temperature, and the activation parameters were determined by lineshape analysis of variable-temperature (VT) NMR spectra in toluene-d8: for 7, ΔH⧧ = 73.0 ± 1.8 kJ mol-1, ΔS⧧ = 22.1 ± 5.5 J mol-1 K-1; for 8, ΔH⧧ = 73.7 ± 1.2 kJ mol-1, ΔS⧧ = 20.3 ± 3.8 J mol-1 K-1. The positive values of ΔS⧧ suggested that the isomerization occurred via a dissociative mechanism. All complexes were active initiators for the ring-opening polymerization of ε-caprolactone (ε-CL) and three substituted ε-CLs: γ-methyl-ε-caprolactone (γMeCL), γ-ethyl-ε-caprolactone (γEtCL), and γ-phenyl-ε-caprolactone (γPhCL). Of all complexes, complex 5 was found to be the most active initiator in this study. The copolymerizations between ε-CL and three substituted ε-CLs produced completely random copolymers. The polymerization was proposed to proceed via a dissociative coordination-insertion mechanism. The catalytic activity of the salicylbenzoxazole titanium complex was lower than that of its closely related salicylbenzothiazole titanium congener. Additionally, DFT calculations unveiled that the ligand decoordination step and the less steric congestion at the titanium center in the salicylbenzothiazole titanium complexes were the key factors in enhancing the catalytic rate.

Titanium complexes of pyrrolylaldiminate ligands and their exploitation for the ring-opening polymerization of cyclic esters.

A series of six-coordinate titanium complexes 1-6 supported by pyrrolylaldiminate ligands were prepared via the reaction of 2 equivalents of ligands and Ti(OiPr)4 in toluene at 70 °C. The X-ray structure of 2 revealed that the two ligands were κ2-coordinated to the titanium center with the two pyrrole nitrogen atoms in trans positions and the two imine nitrogen atoms in cis positions. All complexes were active initiators for the ring-opening polymerization (ROP) of rac-lactide (rac-LA), ε-caprolactone (ε-CL), and three substituted ε-caprolactones (γ-methyl-ε-caprolactone (γMeCL), γ-ethyl-ε-caprolactone (γEtCL), and γ-phenyl-ε-caprolactone (γPhCL)). Polymerizations of all monomers were well controlled, affording predetermined molar masses and narrow dispersity values. Complex 5 exhibited the highest polymerization activities with rac-LA and ε-CL and its performance was comparable to other highly active six-coordinate titanium complexes reported thus far. Kinetic results revealed a first-order dependency on the monomer concentration, and the rate of polymerization was greatly influenced by the substituent on the imine nitrogen. End-group analysis of the isolated PLA and PCL suggested a coordination-insertion mechanism.

Aluminium complexes containing salicylbenzothiazole ligands and their application in the ring-opening polymerisation of rac-lactide and ε-caprolactone.

Two series of aluminium complexes bearing salicylbenzothiazole ligands, namely four-coordinate aluminium complexes (1a-7a) and five-coordinate aluminium complexes (1b-7b), were synthesized and characterized by NMR spectroscopy, elemental analysis and X-ray diffraction crystallography (for 5a and 1b). Their application in the ring-opening polymerisation of rac-lactide and ε-caprolactone was studied with the aim of drawing comparisons to closely related aluminium salicylbenzoxazole complexes investigated previously. In the presence of benzyl alcohol, all complexes were active initiators and polymerisations were all well controlled and living. Kinetic studies revealed first-order kinetics in the monomer. In contrast, the catalytic activity of aluminium salicylbenzothiazole complexes was lower than that of aluminium salicylbenzoxazole counterparts. Detailed DFT calculations were performed and indicated that the observed lower catalytic activity of aluminium salicylbenzothiazole complexes agreed well with the observed higher Gibbs free energy at the ring-opening transition state.

Aluminum complexes containing salicylbenzoxazole ligands and their application in the ring-opening polymerization of rac-lactide and ε-caprolactone.

Two series of four-coordinate aluminum () and five-coordinate aluminum () complexes were successfully synthesized via the reactions between the corresponding salicylbenzoxazole ligands and 1 or 0.5 equivalents of AlMe3, respectively. The synthesized aluminum complexes were characterized by (1)H and (13)C NMR spectroscopy and elemental analysis. The solid-state structures of complexes and were determined using single crystal X-ray diffraction. Upon addition of 1 equivalent of benzyl alcohol, all complexes were efficient initiators for the ring-opening polymerization (ROP) of rac-lactide (rac-LA) and ε-caprolactone (ε-CL). The polymerizations were living with a good control over molecular weights and molecular weight distributions. Under immortal polymerization conditions, all four-coordinate aluminum complexes () exhibited a living polymerization with the obtained molecular weights proportional to the ratio of monomer/benzyl alcohol and the PDIs were narrow. Kinetic studies revealed that both rac-LA and ε-CL polymerizations mediated by all complexes were first-order in monomers. The effects of ligand structure and coordination geometry on the catalytic activity and stereoselectivity were discussed. A good isoselectivity control was achieved for the polymerizations mediated by complexes (Pm = 0.75), (Pm = 0.74), and (Pm = 0.74).

Monomethylaluminum and dimethylaluminum pyrrolylaldiminates for the ring-opening polymerization of rac-lactide: effects of ligand structure and coordination geometry.

Two series of aluminum alkyl complexes supported by pyrrolylaldiminate ligands, LAlMe2 (1a-7a) and L2AlMe (1b-7b), were successfully synthesized and characterized by NMR spectroscopy and elemental analysis. Reactions of trimethylaluminum with the corresponding pyrrolylaldiminate ligands in the molar ratios of 1 : 1 and 1 : 2 yielded dimethylaluminum pyrrolylaldiminates (1a-7a) and monomethylaluminum pyrrolylaldiminates (1b-7b), respectively, in good yields. The structure of 3b, determined by single-crystal X-ray diffraction, displayed a distorted trigonal bipyramidal geometry with the τ value of 0.65. Upon addition of 1 equivalent of benzyl alcohol, all complexes promoted the living ring-opening polymerization of rac-lactide with a good control over molecular weights and polydispersities. Complexes 6a and 7a were found to efficiently mediate the immortal polymerization in the presence of excess equivalents of benzyl alcohol (up to 5 equivalents), as evidenced by the narrow PDI values and the good agreement between the experimental M(n) values and monomer/benzyl alcohol ratios. The steric and electronic effects of the imine nitrogen substituents had a strong influence on the polymerization activities both in catalytic activity and polymer microstructure. The catalytic activity decreased as follows: 4-Me-C6H4 (3) > C6H5 (1) ≈ 4-F-C6H4 (2) ≈ 2-Me-C6H4 (5) > 4-OMe-C6H4 (4) ≫ 2-(t)Bu-C6H4 (6) > adamantyl (7). In comparison, the catalytic activity of the monomethylaluminum complex is slightly higher than that of the dimethylaluminum counterpart. The polymerization of rac-lactide by 6b yielded heterotactically enriched polylactide (P(r) = 0.60) whereas the isotactic-enriched polymer (P(m) = 0.74) was obtained from 7b.

Structures and reaction mechanisms of glycerol dehydration over H-ZSM-5 zeolite: a density functional theory study.

The initial stage of glycerol conversion over H-ZSM-5 zeolite has been investigated using density functional theory (DFT) calculations on an embedded cluster model consisting of 128 tetrahedrally coordinated atoms. It is found that glycerol dehydration to acrolein and acetol proceeds favourably via a stepwise mechanism. The formation of an alkoxide species upon the first dehydration requires the highest activation energy (42.5 kcal mol(-1)) and can be considered as the rate determining step of the reaction. The intrinsic activation energies for the first dehydration are virtually the same for both acrolein and acetol formation, respectively, suggesting the competitive removal of the primary and secondary OH groups. A high selectivity to acrolein at moderate temperatures can be attributed to the selective activation of the stronger adsorption mode of glycerol through the secondary OH group and the kinetically favoured subsequent consecutive steps. In addition, the less reactive nature of acrolein relative to acetol precludes it from being converted to other products upon conversion to glycerol. In accordance with typical endothermic reactions, the forward rate constant for glycerol dehydration significantly increases with increasing reaction temperature.

Structure and dynamics of water confined in single-wall nanotubes.

The structure and dynamics of water confined in model single-wall carbon- and boron-nitride nanotubes (called SWCNT and SWBNNT, respectively) of different diameters have been investigated by molecular dynamics (MD) simulations at room temperature. The simulations were performed on periodically extended nanotubes filled with an amount of water that was determined by soaking a section of the nanotube in a water box in an NpT simulation (1 atm, 298 K). All MD production simulations were performed in the canonical (NVT) ensemble at a temperature of 298 K. Water was described by the extended simple point charge (SPC/E) model. The wall-water interactions were varied, within reasonable limits, to study the effect of a modified hydrophobicity of the pore walls. We report distribution functions for the water in the tubes in spherical and cylindrical coordinates and then look at the single-molecule dynamics, in particular self-diffusion. While this motion is slowed down in narrow tubes, in keeping with previous findings (Liu et al. J. Chem. Phys. 2005, 123, 234701-234707; Liu and Wang. Phys. Rev. 2005, 72, 085420/1-085420/4; Liu et al. Langmuir 2005, 21, 12025-12030) bulk-water like self-diffusion coefficients are found in wider tubes, more or less independently of the wall-water interaction. There may, however, be an anomaly in the self-diffusion for the SWBNNT.

Structures and reaction mechanisms of cumene formation via benzene alkylation with propylene in a newly synthesized ITQ-24 zeolite: an embedded ONIOM study.

The cumene formation via benzene alkylation with propylene on the new three-dimensional nanoporous catalyst, ITQ-24 zeolite, has been investigated by using the ONIOM2(B3LYP/6-31G(d,p):UFF) method. Both consecutive and associative reaction pathways are examined. The contributions of the short-range van der Waals interactions, which are explicitly included in the ONIOM2 model, and an additional long-range electrostatic potential from the extended zeolite framework to the energy profile are taken into consideration. It is found that benzene alkylation with propylene in the ITQ-24 zeolite prefers to occur through the consecutive reaction mechanism. The benzene alkylation step is the reaction rate-determining step with an estimated activation energy of 35.70 kcal/mol, comparable with an experimental report in beta-zeolite of 34.9 kcal/mol. The electrostatic potential from the extended zeolite framework shows a much more significant contribution to the transition state selectivity than the van der Waals interactions.

Adsorption and diffusion of benzene in the nanoporous catalysts FAU, ZSM-5 and MCM-22: a molecular dynamics study.

Molecular dynamics (MD) simulations of benzene in siliceous zeolites (FAU, ZSM-5, and MCM-22) were performed at loadings of 1, 2, 4, 8, and 16 molecules per supercell. The potential energy functions for these simulations were constructed in a semi-empirical way from existing potentials and experimental energetic data. The MD simulations were employed to analyze the dynamic properties of the benzene-zeolite systems. The adsorption energies of benzene/siliceous zeolite complexes increase with increasing loading number, due to the intermolecular attraction between benzene molecules. The self-diffusion coefficient of benzene in siliceous zeolites decreases with increasing loading due to the steric hindrance between the sorbates passing each other. From the zeolite-benzene radial distribution functions it was found that the benzene molecules are relatively far from each other, about 5.2A for siliceous FAU, 5.2A for siliceous ZSM-5, and 4.8A for siliceous MCM-22. In the case of FAU, the benzene molecules prefer to be adsorbed parallel to the surface of the sodalite cage above the six-membered-ring. In ZSM-5, we found a T-structure of the benzene molecules at loadings 2, 4, and 8 molecules per supercell. At loadings of 16 molecules per supercell, the molecules are lined up along the straight channel and their movement is highly correlated. For MCM-22 we found adjacent benzene molecules at a loading of 4 molecules with an orientation similar to the stacked conformation of benzene dimer in the gas phase.