Investigation of index change in compression molding of As40Se50S10 chalcogenide glass.

Chalcogenide glasses are emerging as alternative materials for low-cost and high-volume glass molding processes for infrared optics. In precision glass molding, it is well documented that the refractive index variation in the molded elements can lead to substantial amounts of aberrations. The variation has such a significant effect that the optical designs with molded lenses need to be carefully considered and compensated for index variation to achieve targeted optical performance. This research is aimed to evaluate the refractive index change of a chalcogenide glass during the molding process by both finite element method-based simulation and optical experiment. First, a set of mold inserts was designed and machined by high-speed single-point diamond milling. The structure of the lower mold insert was semiclosed and detachable, which facilitated the molded infrared prisms' release from the mold. Second, finite element method simulation was implemented to predict the refractive index change during the cooling phase by using the Tool-Narayanaswamy-Moynihan model for structural relaxation behavior. It was confirmed that refractive index variation occurred inside the molded wedge due to rapid thermal cycling. However, the amount of variation in the molded element indicates that the refractive index change during the molding process was not uniform. Finally, the refractive index of the molded wedge was measured by an optical setup. The results showed that the index shift is approximately -0.0226 for As40Se50S10, which matched the numerical result by simulation. Compared with oxide glass materials, the index drop of As40Se50S10 has a significant effect on optical performance of molded optics, and the postmolding refractive index should be taken into account in the optical design. In summary, the results presented in this article provided reliable references for refractive index change of As40Se50S10 glass, crucial for precision glass molding or similar applications.

Fabrication of an infrared Shack-Hartmann sensor by combining high-speed single-point diamond milling and precision compression molding processes.

A novel fabrication method by combining high-speed single-point diamond milling and precision compression molding processes for fabrication of discontinuous freeform microlens arrays was proposed. Compared with slow tool servo diamond broaching, high-speed single-point diamond milling was selected for its flexibility in the fabrication of true 3D optical surfaces with discontinuous features. The advantage of single-point diamond milling is that the surface features can be constructed sequentially by spacing the axes of a virtual spindle at arbitrary positions based on the combination of rotational and translational motions of both the high-speed spindle and linear slides. By employing this method, each micro-lenslet was regarded as a microstructure cell by passing the axis of the virtual spindle through the vertex of each cell. An optimization arithmetic based on minimum-area fabrication was introduced to the machining process to further increase the machining efficiency. After the mold insert was machined, it was employed to replicate the microlens array onto chalcogenide glass. In the ensuing optical measurement, the self-built Shack-Hartmann wavefront sensor was proven to be accurate in detecting an infrared wavefront by both experiments and numerical simulation. The combined results showed that precision compression molding of chalcogenide glasses could be an economic and precision optical fabrication technology for high-volume production of infrared optics.

Development of a low cost high precision three-layer 3D artificial compound eye.

Artificial compound eyes are typically designed on planar substrates due to the limits of current imaging devices and available manufacturing processes. In this study, a high precision, low cost, three-layer 3D artificial compound eye consisting of a 3D microlens array, a freeform lens array, and a field lens array was constructed to mimic an apposition compound eye on a curved substrate. The freeform microlens array was manufactured on a curved substrate to alter incident light beams and steer their respective images onto a flat image plane. The optical design was performed using ZEMAX. The optical simulation shows that the artificial compound eye can form multiple images with aberrations below 11 µm; adequate for many imaging applications. Both the freeform lens array and the field lens array were manufactured using microinjection molding process to reduce cost. Aluminum mold inserts were diamond machined by the slow tool servo method. The performance of the compound eye was tested using a home-built optical setup. The images captured demonstrate that the proposed structures can successfully steer images from a curved surface onto a planar photoreceptor. Experimental results show that the compound eye in this research has a field of view of 87°. In addition, images formed by multiple channels were found to be evenly distributed on the flat photoreceptor. Additionally, overlapping views of the adjacent channels allow higher resolution images to be re-constructed from multiple 3D images taken simultaneously.