Ion Pairing and Diffusion in Magnesium Electrolytes Based on Magnesium Borohydride.

One obstacle to realizing a practical, rechargeable magnesium-ion battery is the development of efficient Mg electrolytes. Electrolytes based on simple Mg(BH4)2 salts suffer from poor salt solubility and/or low conductivity, presumably due to strong ion pairing. Understanding the molecular-scale processes occurring in these electrolytes would aid in overcoming these performance limitations. Toward this goal, the present study examines the solvation, agglomeration, and transport properties of a family of Mg electrolytes based on the Mg(BH4)2 salt using classical molecular dynamics. These properties were examined across five different solvents (tetrahydrofuran and the glymes G1-G4) and at four salt concentrations ranging from the dilute limit up to 0.4 M. Significant and irreversible salt agglomeration was observed in all solvents at all nondilute Mg(BH4)2 concentrations. The degree of clustering observed in these divalent Mg systems is much larger than that reported for electrolytes containing monovalent cations, such as Li. The salt agglomeration rate and diffusivity of Mg2+ were both observed to correlate with solvent self-diffusivity: electrolytes using longer- (shorter-) chain solvents had the lowest (highest) Mg2+ diffusivity and agglomeration rates. Incorporation of Mg2+ into Mg2+-BH4- clusters significantly reduces the diffusivity of Mg2+ by restricting displacements to localized motion within largely immobile agglomerates. Consequently, diffusion is increasingly impeded with increasing Mg(BH4)2 concentration. These data are consistent with the solubility limitations observed experimentally for Mg(BH4)2-based electrolytes and highlight the need for strategies that minimize salt agglomeration in electrolytes containing divalent cations.

Electrochemistry of magnesium electrolytes in ionic liquids for secondary batteries.

The electrochemistry of Mg salts in room-temperature ionic liquids (ILs) was studied using plating/stripping voltammetry to assess the viability of IL solvents for applications in secondary Mg batteries. Borohydride (BH4(-)), trifluoromethanesulfonate (TfO(-)), and bis(trifluoromethanesulfonyl)imide (Tf2N(-)) salts of Mg were investigated. Three ILs were considered: l-n-butyl-3-methylimidazolium (BMIM)-Tf2N, N-methyl-N-propylpiperidinium (PP13)-Tf2N, and N,N-diethyl-N-methyl(2-methoxyethyl)ammonium (DEME(+)) tetrafluoroborate (BF4(-)). Salts and ILs were combined to produce binary solutions in which the anions were structurally similar or identical, if possible. Contrary to some prior reports, no salt/IL combination appeared to facilitate reversible Mg plating. In solutions containing BMIM(+), oxidative activity near 0.8 V vs Mg/Mg(2+) is likely associated with the BMIM cation, rather than Mg stripping. The absence of voltammetric signatures of Mg plating from ILs with Tf2N(-) and BF4(-) suggests that strong Mg/anion Coulombic attraction inhibits electrodeposition. Cosolvent additions to Mg(Tf2N)2/PP13-Tf2N were explored but did not result in enhanced plating/stripping activity. The results highlight the need for IL solvents or cosolvent systems that promote Mg(2+) dissociation.

Development of biofuel cells based on gold nanoparticle decorated multi-walled carbon nanotubes.

This study focused on developing the synthesis of Au nanoparticle-decorated functionalized multi-walled carbon nanotubes (Au-NPs/f-MWCNTs) for monosaccharide (bio-fuel) oxidation reactions and practical application in air-biofuel cells. We developed a scalable and straightforward method to synthesize Au-NPs/f-MWCNTs which allow us to control the loading and size of the Au-NPs. The Au-NPs/f-MWCNTs exhibited better catalytic activities and stability than the Au sheet and subsequently resulted in a threefold increase in the power density of the air-glucose fuel cell with an exceptionally high open circuit voltage (~1.3 V). The catalytic efficiency was confirmed by high performance liquid chromatography with the superior of the Au-NPs/f-MWCNTs over a bare gold electrode. In addition, the application of this advanced catalyst to other monosaccharide oxidation reactions figured out that the configuration of -OH groups at C(2) and C(3) of the reactants plays an important role in the initial adsorption process, and thus, affects the required activation energy for further oxidation. The different monosaccharides lead to significantly different fuel cell performances in terms of power density, which coherently corresponds to the difference in the configuration of C(2) and C(3). Because two small air-glucose fuel cells using Au-NPs/f-MWCNTs can run a LED lamp, further applications of other monosaccharides as fuel in biofuel cells for equivalent required power devices may be possible.