Influence of the experimental conditions on porosity and structure of adsorbents elaborated from Moroccan oil shale of Timahdit by chemical activation.

This study records experiments undertaken to determine the suitable conditions for the use of the oil shale of Timahdit, as an adsorbent for water treatment. A simple process was proposed based on chemical activation. The preparation has been carried out by carbonization after impregnation of the precursor with phosphoric acid. The effect of different conditions of preparation on the specific surface area is discussed. These parameters are H3PO4/shale weight ratio, carbonization temperature, carbonization time and concentration of H3PO4. The properties and surface structure of the adsorbent were investigated by XPS and FT-IR. Their total surface acidity and basicity were also determined. The retention process of methylene blue (MB) by adsorbents has been studied. It was found that MHP2 and MHP7 have relatively high retention ability as compared to activated carbons.

Production of activated carbon from a new precursor molasses by activation with sulphuric acid.

Activated carbon has been prepared from molasses, a natural precursor of vegetable origin resulting from the sugar industry in Morocco. The preparation of the activated carbon from the molasses has been carried out by impregnation of the precursor with sulphuric acid, followed by carbonisation at varying conditions (temperature and gas coverage) in order to optimize preparation parameters. The influence of activation conditions was investigated by determination of adsorption capacity of methylene blue and iodine, the BET surface area, and the pore volume of the activated carbon were determined while the micropore volume was determined by the Dubinin-Radushkevich (DR) equation. The activated materials are mainly microporous and reveal the type I isotherm of the Brunauer classification for nitrogen adsorption. The activated carbons properties in this study were found for activation of the mixture (molasses/sulphuric acid) in steam at 750 degrees C. The samples obtained in this condition were highly microporous, with high surface area (> or =1200 m2/g) and the maximum adsorption capacity of methylene blue and iodine were 435 and 1430 mg/g, respectively.