Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 13 de 13
Filtrar
Mais filtros











Base de dados
Intervalo de ano de publicação
1.
Materials (Basel) ; 12(23)2019 Nov 28.
Artigo em Inglês | MEDLINE | ID: mdl-31795158

RESUMO

The presence of volatile organic compounds in groundwater is a major concern when it is used as a drinking water source because many of these compounds can adversely affect human health. This work reports on the preparation and characterization of white and red Brazilian São Simão's kaolinite-TiO2 nanocomposites and their use as catalysts in the photochemical degradation of toluene, a significant volatile organic compound. The nanocomposites were prepared by a sol-gel procedure, using titanium bis(triethanolaminate)diisopropoxide as a precursor. Thermal treatments of the nanocomposites led to different polymorphic titania phases, while the clay changed from kaolinite to metakaolinite. This structural evolution strongly affected the photocatalytic degradation behavior-all the solids efficiently degraded toluene and the solid calcined at 400 °C, formed by kaolinite and anatase, showed the best behavior (90% degradation). On extending the photochemical treatment up to 48 h, high mineralization levels were reached. The advantage of photodegradation using the nanocomposites was confirmed by comparing the results from isolated components (titanium dioxide and kaolinite) to observe that the nanocomposites displayed fundamental importance to the photodegradation pathways of toluene.

2.
Heliyon ; 4(3): e00571, 2018 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-29862338

RESUMO

Two solvent free methods of a one-to-one alcohol/acid mol ratio synthesis of benzyl esters of the formic, acetic, benzoic, salicylic, nicotinic, and oxalic acids are described. The stoichiometric reactions used 1.5 mol ratio solid NbCl5 as the reagent and required from two to three hours for completion at room temperature; for the catalytic processes, NbCl5 was grafted directly, at room temperature, onto a silica gel of specific area of 507 m2g-1, produced from construction sand and sodium carbonate, forming a 5.4% Nb w/w SiO2-Nb gel with a specific area of 412 m2g-1. At 10% w/w catalyst/alcohol ratio, this SiO2-Nb catalyst gave similarly very good yields but required from 6 to 9 hours at the reflux temperature of the slurry. The catalyst could be re-used three times.

3.
J Inorg Biochem ; 180: 171-178, 2018 03.
Artigo em Inglês | MEDLINE | ID: mdl-29306116

RESUMO

The search for more efficient and less aggressive cancer treatment methods has intensified over the last decades and has involved many scientific areas. To provide skin cancer patients with better quality of life, this work aims to incorporate chemotherapy into polyamide membranes, functionalized by the sol-gel methodology, for controlled drug release at the target tissue. A 200-micrometer-thick flexible polyamide membrane prepared by Additive Manufacture was activated and functionalized with the alkoxide 3-chloropropyltriethoxysilane, which was followed by incorporation of the antitumor agent cisplatin. Membrane functionalization with the alkoxide was attested by infrared absorption spectroscopy, which evidenced a band at 1100cm-1, due to Si-O-Si vibration, and typical cisplatin bands at 3200 and 1600cm-1. The thermogravimetric curve revealed increased silicon oxide and platinum residues. Drug release was tested in simulated body fluid. Cytotoxicity was evaluated by the Cell Proliferation Kit, which gave IC50 of 23.95µgM.


Assuntos
Antineoplásicos/química , Cisplatino/química , Membranas Artificiais , Nylons/química , Antineoplásicos/administração & dosagem , Antineoplásicos/farmacologia , Antineoplásicos/uso terapêutico , Líquidos Corporais , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Cisplatino/administração & dosagem , Cisplatino/farmacologia , Cisplatino/uso terapêutico , Preparações de Ação Retardada , Géis , Humanos , Microscopia Eletrônica de Varredura , Modelos Biológicos , Neoplasias Cutâneas/tratamento farmacológico , Espectrometria por Raios X , Espectrofotometria Infravermelho , Espectrofotometria Ultravioleta , Termogravimetria , Difração de Raios X
4.
Nanotechnology ; 27(38): 385103, 2016 Sep 23.
Artigo em Inglês | MEDLINE | ID: mdl-27533108

RESUMO

The unique properties of macroporous, mesoporous, and microporous systems, including their ability to accommodate molecules of different sizes inside their pores and to act as drug delivery systems, have been the object of extensive studies. In this work, mesoporous silica with hexagonal structure was obtained by template synthesis via the sol-gel process. The resulting material was used as support to accommodate the anti-inflammatory agent indomethacin. The alkaline route was used to prepare the mesoporous silica; cetyltrimethylammonium bromide was employed as porogenic agent. The silica particles were functionalized with 3-aminopropyltriethoxysilane alkoxide (APTES) by the sol-gel post-synthesis method. Indomethacin was incorporated into the silica functionalized with APTES and into non-functionalized silica. The resulting systems were characterized by x-ray diffraction (XRD), specific area, infrared spectroscopy, and thermal analyses (TGA). XRD attested to formation of mesoporous silica with hexagonal structure. This structure remained after silica functionalization with APTES and incorporation of indomethacin. Typical infrared spectroscopy vibrations and organic material decomposition during TGA confirmed silica functionalization and drug incorporation. The specific surface area and pore volume of the functionalized material incorporated with indomethacin decreased as compared with the specific surface area and pore volume of the non-functionalized silica containing no drug, suggesting both the functionalizing agent and the drug were present in the silica. Cytotoxicity tests conducted on normal fibroblasts (GM0479A) cells attested that the silica matrix containing indomethacin was less toxic than the free drug.


Assuntos
Anti-Inflamatórios/química , Sistemas de Liberação de Medicamentos , Porosidade , Dióxido de Silício , Difração de Raios X
5.
ACS Appl Mater Interfaces ; 7(20): 10853-62, 2015 May 27.
Artigo em Inglês | MEDLINE | ID: mdl-25938521

RESUMO

This study aimed to assess the capacity of saponite modified with n-hexadecyltrimethylammonium bromide (CTAB) and/or 3-aminopropyltriethoxysilane (APTS) to adsorb and remove caffeine from aqueous solutions. Powder X-ray diffraction (PXRD) revealed increased basal spacing in the modified saponites. Small-angle X-ray scattering (SAXS) confirmed the PXRD results; it also showed how the different clay layers were stacked and provided information on the swelling of natural saponite and of the saponites functionalized with CTAB and/or APTS. Thermal analyses, infrared spectroscopy, scanning electron microscopy, element chemical analysis, and textural analyses confirmed functionalization of the natural saponite. The maximum adsorption capacity at equilibrium was 80.54 mg/g, indicating that the saponite modified with 3-aminopropyltriethoxysilane constitutes an efficient and suitable caffeine adsorbent.


Assuntos
Silicatos de Alumínio/química , Cafeína/isolamento & purificação , Compostos Orgânicos/química , Purificação da Água/métodos , Difração de Raios X/métodos , Adsorção , Cafeína/química , Nanopartículas/química , Nanopartículas/ultraestrutura , Tamanho da Partícula , Espalhamento a Baixo Ângulo , Poluentes Químicos da Água/isolamento & purificação
6.
J Fluoresc ; 25(2): 433-40, 2015 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-25686772

RESUMO

Hybrid nanosilicas constitute a broad study field. They find application as catalysts, pigments, drug delivery systems, and biomaterials, among others, and it is possible to obtain them via the sol-gel methodology. Lanthanide ions present special properties like light emission. Their incorporation into a silica matrix can enhance their luminescent properties, which enables their application as luminescent markers. This work reports on (i) the preparation of luminescent spherical hybrid silica nanoparticles by the hydrolytic sol-gel methodology, (ii) doping of the resulting matrix with the europium(III) ion or its complex with 1,10-phenanthroline, and (iii) characterization of the final powders by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, and europium(III) ion photoluminescence. The synthesized materials consisted of hybrid, amorphous, polydispersed nonspherical silicas with average size of 180 nm. Photoluminescence confirmed incorporation of the europium(III) ion and its complex into the silica matrix-the ligand-metal charge transfer band emerged in the excitation spectra. The emission spectra presented the bands corresponding to the transition of the excited state (5)D0 level to (7)FJ (J = 0, 1, 2, 3 and 4). The main emission occurred in the red region; the lifetime was long. These characteristics indicated that the prepared nanospherical hybrid silicas could act as luminescent markers.


Assuntos
Substâncias Luminescentes/química , Nanopartículas/química , Nanotecnologia/métodos , Dióxido de Silício/química , Európio/química , Compostos Organometálicos/química , Fenantrolinas/química
7.
Langmuir ; 30(13): 3857-68, 2014 Apr 08.
Artigo em Inglês | MEDLINE | ID: mdl-24625117

RESUMO

Herein, we present a cross-linked ureasil-polyether-siloxane hybrid (labeled PEO500) that can function as a stimuli-sensitive material; it swells or shrinks in response to changes in the environmental conditions and it can also, effectively and selectively, remove dyes from water solution. We also developed a methodology to separate a mixture of cationic and anionic dyes present in water. Addition of PEO500 to an aqueous solution of the anionic orange II (OII) or the ponceau S (PS) dye rendered the solution colorless, but an aqueous solution of cationic methylene blue (MB) remained unchanged after 2 h of contact with the insoluble matrix. In situ small-angle X-ray scattering (SAXS) showed that the distance of siloxane nanodomains are strongly affected by the swelling or shriking. By in situ UV-vis adsorption experiments, we found that the kinetics of OII and PS removal followed a pseudo-first-order rate equation. We accomplished B3LYP calculations, to establish which sites on the matrix interacted with the dyes and to investigate the nature of the matrix-dye chemical bonds. On the basis of the experimental and theoretical investigations, we proposed some mechanisms to explain how PEO500 adsorbs anionic dyes efficiently. This "smart" matrix is potentially applicable as an efficient, fast, selective, and convenient device in water treatment and stimuli-sensitive response materials.

8.
ACS Appl Mater Interfaces ; 4(5): 2525-33, 2012 May.
Artigo em Inglês | MEDLINE | ID: mdl-22530552

RESUMO

The catalytic efficiency of takovite-aluminosilicate-chromium catalysts obtained by adsorption of Cr(3+) ions from aqueous solutions by a takovite-aluminosilicate nanocomposite adsorbent is reported. The adsorbent was synthesized by the coprecipitation method. The catalytic activity of the final Cr-catalysts depended on the amount of adsorbed chromium. (Z)-cyclooctene conversion up to 90% with total selectivity for the epoxide was achieved when the oxidation was carried out with hydrogen peroxide, at room temperature. After five consecutive runs, the catalysts maintained high activity, although after the sixth reuse, the epoxide yields strongly decreased to 35%. The catalysts were also efficient for cyclohexane oxidation, reaching up to 18% conversion, with cyclohexanone/cyclohexanol selectivity close to 1.2. On the whole, their use as catalysts gives a very interesting application for the solids obtained by adsorption of a contaminant cation such as Cr(3+).

9.
J Fluoresc ; 22(3): 899-906, 2012 May.
Artigo em Inglês | MEDLINE | ID: mdl-22205247

RESUMO

YVO(4):Eu(3+) phosphors have been prepared by the hydrolytic sol-gel methodology, with and without alkaline catalyst. The solid powder was obtained by reaction between yttrium III chloride and vanadium alkoxides; the europium III chloride was used as structural probe. The powder was treated at 100, 400, 600, or 800 °C for 4 h. The samples were characterized by X-ray diffraction, thermal analysis, and photoluminescence. The XRD patterns revealed YVO(4) crystalline phase formation for the sample prepared without the catalyst and heat-treated at 600 °C and for the sample prepared in the presence of ammonium as catalyst and heat-treated at 100 °C. The average nanosized crystallites were estimated by the Scherrer equation. The sample which was produced via alkaline catalysis underwent weight loss in two stages, at 100 and 400 °C, whereas the sample obtained without catalyst presented four stages of weight loss, at 150, 250, 400, and 650 °C. The excitation spectra of the samples treated at different temperatures displayed the charge transfer band (CTB) at 320 nm. PL data of all the samples revealed the characteristic transition bands arising from the (5)D(0) → (5)F(J) (J = 0, 1, 2, 3, and 4) manifolds under maximum excitation at 320, 394, and 466 nm in all cases. The (5)D(0) → (7)F(2) transition often dominates the emission spectra, indicating that the Eu(3+) ion occupies a site without inversion center. The long lifetime suggests that the matrix can be applied as phosphors. In conclusion, the sol-gel methodology is a very efficient approach for the production of phosphors at low temperature.

10.
ACS Appl Mater Interfaces ; 3(4): 1311-8, 2011 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-21446749

RESUMO

Luminescent hybrid materials derived from kaolinite appear as promising materials for optical applications due to their specific properties. The spectroscopic behavior of terbium picolinate complexes covalently grafted on kaolinite and the influence of the secondary ligand and thermal treatment on luminescence are reported. The resulting materials were characterized by thermal analysis, element analysis, X-ray diffraction, infrared absorption spectroscopy, and photoluminescence. The thermogravimetric curves indicated an enhancement in the thermal stability up to 300 °C for the lanthanide complexes covalently grafted on kaolinite, with respect to the isolated complexes. The increase in the basal spacing observed by X-ray diffraction confirmed the insertion of the organic ligands into the basal space of kaolinite, involving the formation of a bond between Al-OH and the carboxylate groups, as evidenced by infrared spectroscopy. The luminescent hybrid material exhibited a stronger characteristic emission of Tb(3+) compared to the isolated complex. The excitation spectra displayed a broad band at 277 nm, assigned to a ligand-to-metal charge transfer, while the emission spectra presented bands related to the electronic transitions characteristic of the Tb(3+) ion from the excited state (5)D(4) to the states (7)F(J) (J=5, 4, and 3), with the 4→5 transition having high intensity with green emission.

11.
J Colloid Interface Sci ; 341(1): 186-93, 2010 Jan 01.
Artigo em Inglês | MEDLINE | ID: mdl-19833345

RESUMO

Functionalization of Brazilian São Simão kaolinite and Spanish Yunclillos saponite with the alkoxysilanes 3-aminopropyltriethoxysilane and 3-mercaptopropyltrimethoxysilane is reported. The resulting hybrids were characterized by X-ray diffraction, thermal analysis, infrared absorption spectroscopy, and scanning electron microscopy, which demonstrated the effectiveness of the interlamellar grafting process. The X-ray diffractograms revealed incorporation of the alkoxide molecules into the interlayer space of the clays. The displacement of the stretching bands of interlayer hydroxyls in the infrared spectra of the modified kaolinites and the increased intensity of the Mg-OH vibrations in the spectra of the modified saponites confirmed the functionalization of the clays. The thermal behavior of the organoclays confirmed the stability of the hybrids, which was dependent on the clay used for preparation of the materials.

12.
J Colloid Interface Sci ; 335(2): 210-5, 2009 Jul 15.
Artigo em Inglês | MEDLINE | ID: mdl-19433329

RESUMO

This paper presents the results of the functionalization of Brazilian São Simão kaolinite with pyridine-2-carboxylic and pyridine-2,6-dicarboxylic acids. The functionalization involved refluxing of the pyridine-carboxylic acid in the presence of kaolinite previously intercalated with dimethyl sulfoxide; both acids effectively displaced dimethyl sulfoxide from the clay interlayer. The resulting materials were characterized by X-ray diffraction, thermal analysis, infrared absorption spectroscopy, and C and N elemental analysis. The X-ray diffractograms revealed the incorporation of the acid molecules into the interlayer space of kaolinite. The thermogravimetric curves of the kaolinite samples functionalized with the pyridine-carboxylic acids indicated that the materials were thermally stable up to 300 degrees C. The displacements of the bands due to interlayer hydroxyls in the infrared absorption spectra also confirmed the functionalization of the kaolinite with the pyridine-carboxylic acids.

13.
ACS Appl Mater Interfaces ; 1(11): 2667-78, 2009 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-20356141

RESUMO

The preparation, characterization, and application in oxidation reactions of new biomimetic catalysts are reported. Brazilian Sao Simao kaolinite clay has been functionalized with [meso-tetrakis(pentafluorophenyl)porphinato]iron(III), Fe(TPFPP). To obtain the functionalized clay, the natural clay was purified by dispersion-sedimentation, expanded by insertion of dimethyl sulfoxide (DMSO), and functionalized with amino groups by substitution of DMSO with ethanolamine. These previous steps allowed clay functionalization with Fe(TPFPP), leading to a layered material with a basal spacing of 10.73 A. Clay functionalization with the porphyrin was confirmed by formation of the secondary amine, as demonstrated by FTIR bands at 3500-3700 cm(-1). UV-vis spectroscopy revealed a red shift in the Soret band of the iron porphyrin in the functionalized material as compared to the parent iron porphyrin catalyst in solution, indicating Fe(III)P --> Fe(II)P reduction. The catalytic performance of the functionalized clay was evaluated in the epoxidation of cyclooctene, with complete selectivity for the epoxide (100% epoxide yield), and ketonization of cyclohexane, cyclohexanone being the major product. The novel catalyst was also evaluated in the Baeyer-Villiger (BV) oxidation of cyclohexanone, with 85% conversion of cyclohexanone in epsilon-caprolactone, with total selectivity to epsilon-caprolactone.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA